JBLSGSENSE Soundgear Sense Open Ear Headphones User Guide
- June 15, 2024
- JBL
Table of Contents
QUICK START GUIDE
SOUNDGEAR
SENSE
WHAT’S IN THE BOX
APP
JBL HEADPHONES
Get even more control and personalization of your listening experience with
this free app.
https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html
HOW TO WEAR
HOW TO WEAR (OPTIONAL)
FIRST TIME USE
POWER ON & CONNECT
DUAL CONNECT + SYNC
MULTI-POINT CONNECTION
CONTROLS
POWER OFF
FACTORY RESET
DO MORE WITH THE APP
CHARGING
LED BEHAVIORS
TECH SPEC
| Model: | SOUNDGEAR SENSE |
|---|---|
| Driver size: | 16.2mm/ 0.638″ Dynamic Driver |
| Power supply: | 5V 1A |
| Earbud: | 12.7g per pc (25.4 g combined)/ 0.028 lbs per pc (0.056 lbs combined) |
| Charging case: | 67 g/ 0.1477 lbs |
| Neckband: | 5.3 g/ 0.0117 lbs |
| Earbud battery type: | Lithium-ion battery (70 mAh/ 3.85 V) |
| Charging case battery type: | Lithium-ion battery (600 mAh/ 3.8 V) |
| Charging time: | 2 hrs from empty |
| Music playtime with BT on: | Up to 6 hrs |
| Talk time: | Up to 3.5 hrs |
| Frequency response : | 20 Hz – 20 kHz |
| Impedance: | 32 ohm |
| Sensitivity: | 112 dB SPL@1 kHz |
| Maximum SPL: | 90 dB |
| Microphone sensitivity: | -38 dBV/Pa@1 kHz |
| Bluetooth version: | 5.3 |
| Bluetooth profile version: | HFP 1.8, A2DP 1.4, AVRCP 1.6.2 |
| Bluetooth transmitter frequency range: | 2.4 GHz – 2.4835 GHz |
| Bluetooth transmitter power: | <10 dBm |
| Bluetooth transmitter modulation | GFSK, π/4-DQPSK, 8DPSK |
| Maximum operation temperature: | 45 °C |
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY |
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (6132A-JBLSGSENSE) has also been tested against this SAR limit
According to this standard, the highest SAR value reported during product
certification for head use is 0.13W / kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters and similar
accessories shall not contain metal parts in its assembly. Use of accessories
that do not meet these requirements may not comply with IC RF exposure
requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
001188-230142
FCC ID: APIJBLSGSENSE
IC: 6132A-JBLSGSENSE| IS 13252(PART 1):2010 /
IEC 60950-1:2005
R-41214817
www.bis.gov.in
---|---
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN
International Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective owners.
Product specifications and app screens are subject to change without notice.
IC: 6132A-JBLSGSENSE
Documents / Resources
| JBL
JBLSGSENSE Soundgear Sense Open Ear
Headphones
[pdf] User Guide
JBLSGSENSE Soundgear Sense Open Ear Headphones, JBLSGSENSE, Soundgear Sense
Open Ear Headphones, Open Ear Headphones, Headphones
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>