milwaukee M18 Dual Slope Rotary Laser User Guide

milwaukee M18 Dual Slope Rotary Laser

Product Information

Specifications:

• Made in: Vietnam
• Model: 3704-21
• Product Name: Red Exterior Dual Slope Rotary Laser Level Kit w/ Receiver & Remote
• Battery Type: Not specified in the manual

Product Usage Instructions

Power
To turn the product ON, press the POWER button. To turn it OFF, press and hold the POWER button.

Setting Grade

1. Press the GRADE button to start editing values.
2. Use the D-PAD to change the values.

Menu
Press the MENU button to enter or exit features. Use the D-PAD and OK button to select features.

Level
Changes the levelling mode the laser is currently in:

• Level
• Slope
• Manual Slope Mode

3. Press the GRADE button to change between axes.
4. Press OK to confirm values.

Receiver & Remote Control Menu Navigation

• CHANNEL
• PAIRING
• BATTERY GAUGE
• AUDIO
• ACCURACY

Features
The product offers various features:

• PAIRING: Allows pairing with a remote control.
• BUMP SENSITIVITY: Laser defaults to High Sensitivity, can be switched to Low Sensitivity with a paired remote control.
• MASK: Use the D-PAD to mask desired quadrants where the laser will be hidden. Only adjacent quadrants can be masked. Only 3 total quadrants can be masked at any time.
• ALIGNMENT: Manually align or slope the laser line with the remote or laser’s D-PAD.
• QUICK START GUIDE
• SWEEP
• GRADE MATCH: Laser automatically searches and aligns to the center of the receiver.
• CHANNEL LINK: Used to eliminate interruptions from other lasers by only detecting devices on the same channel.

FAQ

• Q: How do I perform alignment with the laser?
  Select the desired axis to perform alignment. Use the D-PAD to move the laser up or down along the X or Y axis. To reset back to level, press the LEFT & RIGHT buttons on the D-PAD simultaneously. To adjust vertical alignment, place the laser in the vertical orientation.

• Q: How do I switch between High Sensitivity and Low Sensitivity?
  Pair a remote control with the laser and use the remote control to switch between High Sensitivity and Low Sensitivity.

• Q: How many quadrants can be masked at a time?
  You can mask up to 3 total quadrants at any time, but only adjacent quadrants can be masked.

• Q: How do I pair the receiver with the laser?
  On the RECEIVER, press MENU to toggle to channel link. Use the D-PAD to select the desired channel and press OK to confirm.

• Q: How do I pair the remote control with the laser?
  On the REMOTE CONTROL or LASER, select Channel Link and then choose the desired channel. Changing the channel on the laser will update the channel on all paired devices.

• Q: How do I initiate grade match sequence?
  On the RECEIVER, press the grade match button, then toggle between grade match and center lock. Afterwards, confirm the axis by pressing OK.

• Q: Can I view the feature list or exit a current feature without saving?
  Yes, you can press MENU to view the feature list or use it to exit the current feature without saving.

• Q: Do I need to read the Laser Manual before using the product?
  Yes, it is recommended to read the Laser Manual before using the product for proper understanding and usage.

GET STARTED – LASER

• POWER
  Press to turn ON, press and hold to turn OFF.

• MENU
  Press Menu button to enter or exit features. Use D-PAD and OK button select features.

• LEVEL
  Changes the leveling mode the laser is currently in.

  • Level
  • Slope
  • Manual Slope Mode

SETTING GRADE

1. Press GRADE to start editing values.
2. Use D-PAD to change values.
3. Press GRADE to change between axes.
4. Press OK to confirm values.

RECEIVER & REMOTE CONTROL MENU NAVIGATION

FEATURES

PAIRING
Used to pair the laser with receiver/remote. Laser and receiver/ remote kit will already be paired.

• RECEIVER and LASER: Place receiver into pairing mode then the laser. Press MENU BUTTON to toggle to pairing mode and D-PAD to select ON. With the receiver press OK to initiate pairing. The pairing icon in the status bar will FLASH while it searches for a pair. Select the PAIRING FEATURE from the menu on the LASER. Select “+Add Device.” When paired, laser will show a “PAIRED” graphic on the screen and the laser and receiver will make an audible tone.
• REMOTE CONTROL and LASER: Enter pairing mode and select “+Add Device.” Repeat process on the laser. Once paired, both laser and remote will show a “PAIRED” graphic on the screen and the laser will make an audible tone.

BUMP SENSITIVITY
Laser defaults to High Sensitivity. The setting can be switched to Low Sensitivity with a paired remote control.

GRADE MATCH
Laser automatically searches and aligns to the center of receiver.

• On RECEIVER press grade match button then toggle between grade match and center lock. Afterwards confirm axis. Press OK to confirm.
• On REMOTE/LASER select “Grade Match” in menu, then choose an axis to align to. Laser will move to find the center of receiver.

MASK
Use the D-PAD to mask desired quadrants where the laser will be hidden.
Note: Only adjacent quadrants can be masked. Only 3 total quadrants can be masked at any time.

SWEEP
Different sweep angles can be selected between 10°, 45°, 90° and dot mode.

CHANNEL LINK
Channel link can be used to eliminate interruptions from other lasers by only detecting devices on the same channel.

• On RECEIVER press MENU to toggle to channel link use D-PAD to select channel. Press OK to confirm.
• On REMOTE CONTROL or LASER: Select “Channel Link.” Select desired channel.
  Note: Changing channel on laser will update channel on all paired devices.

ALIGNMENT
Manually align or slope the laser line with the remote or laser’s D-PAD.

Read the Laser Manual Before Use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>