WBCF BS160 Ceiling Fan with Light Instruction Manual

WBCF BS160 Ceiling Fan with Light

Product Information

Specifications

• Voltage: 120V/60Hz
• Power: Motor power: 35W
• Speed + Color change: 6speed+3 color temperatures(Cool white light 6500K+ warm light 3000K+ neutral light 4500K)
• Number of blades: 3 blades
• Fan blade material: ABS
• Motor Material: Pure copper wire winding and high-quality silicon steel stator, high efficiency, super quiet, energy saving.
• Control method: Remote control
• Diameter: 42inch
• Reversible: YES

Product Usage Instructions

Precautions:
Before using the ceiling fan, please read and follow these precautions:

• Make sure the power is off before connecting any wires for safety.
• Ensure that every wire is connected to the right place.

Installation:

Step 1: Install the ceiling plate to the outlet box

1. Take off the screws on the outlet box.
2. Install the ceiling plate to the outlet box using the screws.
3. WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to an outlet box marked “Acceptable for Fan Support”. Use the mounting screws provided with the outlet box. Most outlet boxes commonly used for supporting lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

Step 2: Install the housing

1. Remove the four fixing screws on the ceiling plate and take out the motor from the package.
2. Hang the steel safety cable latch of the motor into the ceiling plate hook.
3. Secure the motor to the ceiling plate by inserting the four set screws through the hole of the hanger bracket and tightening them.
4. Connect the controller wire to the motor wire.
5. Insert the receiver between the hanger bracket and ceiling plate.

Step 3: Install the fan blades

1. Remove the screws on the motor and save them for the next step.
2. Align the lug of the housing with the notch of the ceiling plate and rotate it clockwise to clamp the housing.

Step 4: Install the Lamp

1. Remove the three fixing screws of the disc on the motor.
2. Pass the LED driver input wires through the light panel first and insert them tightly into the light source board.
3. Align the lamp panel hole with the hole of the disc on the motor and use the three fixing screws to lock the lamp panel.
4. Screw the lampshade into the lamp panel.

FAQ

Q: How do I troubleshoot fan wobble?
A: Check whether the screw of the blade retracted to the motor is locked.

Dear Customer,

Thanks for your purchase!
Should you have any questions or concerns, please do not hesitate to contact us

Precautions

Before using this ceiling fan with light, please read this manual carefully and operate strictly in accordance with the procedures.

1. The input voltage of this product: 120V/60Hz
2. If you have insufficient knowledge of electrical appliances, be sure to hire an experienced expert to install them.
3. Before installing and disassembling the ceiling fan light, please turn off the power first. The installation must be installed in the order of ground wire, live wire, and neutral wire. Before disassembly, it must be disassembled in the order of neutral wire, live wire and ground wire to avoid electric shock.
4. The ceiling fan must be installed on a solid ceiling, and the location of the ceiling fan must be able to withstand a gravity greater than 60 KG.
5. When installing the ceiling fan, all screws must be securely locked.
6. When the ceiling fan is rotating, no objects should touch the blades to avoid danger.
7. The angle and elevation of the leaf frame are determined after many repeated measurements, so it cannot be changed at will. When installing the leaf frame and blades, special care should be taken not to force collisions. If the angle and elevation angle of the leaf frame are deformed that will cause the ceiling fan to shake.

Prepare tools before installation

Basic parameters

1. Voltage: 120V/60Hz
2. Power: Motor power: 35W
3. Speed + Color change: 6speed+3 color temperatures(Cool white light 6500K+ warm light 3000K+ neutral light 4500K)
4. Number of blades: 3 blades
5. Fan blade material: ABS
6. Motor Material: Pure copper wire winding and high-quality silicon steel stator, high efficiency, super quiet, energy saving.
7. Control method: Remote control
8. Diameter: 42inch
9. Reversible: YES

Ceiling Fan Kit Package List

Ceiling Fan Kit
Before installing the ceiling fan, make sure to check all the following accessories in the box one by one, if there is no shortage, you can install it .

Installation Procedures

1. Secure the ceiling plate
   First remove the Ceiling plate from the fan motor, (Figure 1 ), there are two different kinds of screws to fix the plate, one works for concrete ceilings, and the other work for wood ceilings (Figure 2), choose the right screws to fix the ceiling fan(Figure 3&4)
   TIPS:
   Use different screws to secure the ceiling plate according to the different materials of the ceiling, please do not install the ceiling plate on a ceiling that is unable to bear 60KG to prevent any potential danger. After the ceiling plate is located, make sure it can withstand more than 60 KG, try to pull by hand to test if the ceiling is strong enough for safety.

2. Install the ceiling plate to the outlet box

   • Take off the screws on the outlet box.
   • Install the ceiling plate to the outlet box with screws
     WARNING: To reduce the risk of fire, electric shock, or personal injury mount to an outlet box marked “ Acceptable for Fan Support ”. Use the mounting screws provided with the outlet box. Most outlet boxes commonly used for supporting lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt

3. Install the fan motor

   • As shown in figure 5, remove the four fixing screws on the ceiling plate, then take out the motor from the package.
   • Put the steel safety cable latch of the motor hangs into the ceiling plate hook, the four set screws through the hole of the hanger bracket, and secure it to the ceiling plate. (figure 6)
   • Take out the controller from the package, and connect the controller wire to the motor wire together, (figure7).
   • After the receiver wiring is completed, insert the receiver between the hanger bracket and ceiling plate.( figure8)
     ATTENTION:
     Make sure the power is off when you are connected to these wires for safety, and make sure every wire is connected right place.

4. Install the housing

   • Align the lug of the housing with the notch of the ceiling plate, and rotate it clockwise to clamp the housing.( figure9)

5. Install fan blades

   • Take off the screws on the motor, and save them for next step. (Figure 10)
   • Tighten the fan blades into the motor with the screws, making sure every screw is fixed tightly for safety. (Figure 11 )
     ATTENTION: Solid wood blade has a certain space for extrusion, so the blade must be installed with the gasket on the screws, after installing the blades, just use conventional force to lock it tight, do not continue to exert strong force to screw in the blade lock, otherwise it will cause irreversible failure to the motor coil.

6. Install the Lamp

   • As shown in Figure 12 below, remove the 3 fixing screws of the disc on the motor
   • As shown in Figure 13 below, pass the LED driver input wires through the light panel first and insert the LED driver input wires tightly into the light source board.
   • Align the lamp panel hole with the hole of the disc on the motor and use the 3 fixing screws to lock the lamp panel. (Fig14)
   • Screw the lampshade into the lamp panel, as shown in Figure 15

7. Balance adjustment method of ceiling fan
   If any is shaking after installing the ceiling fan, please check if the screws that fix the drop ball, mounting bracket, hanger, leaf shelf, and blade are locked.

If one of the above parts is not locked tightly, please re-lock it. If it is locked, please try the following ways to adjust the balance. (Figure 16).

1. Change the position of the fan blades:
   • As shown in Figure 16 on the right, please remove the blades 1 and 2 and then lock each other to the opposite position to observe the effect.
   • If there is no improvement after step a. Please remove fan blades 2 and 3 and re-lock each other to the opposite position to observe the effect.
2. Adjust with balance pack
   • Take out the balance bag from the packing box, and use a balance clamp to select one of the fan blades and clamp the balance clamp on the edge of the tail end of the fan blade (as shown in Figure 17 on the right)
   • Turn on the fan to see whether the shaking of the ceiling fan has been reduced. If it does not improve, try another fan blade. Experiment with all the fan blades, in turn, to find the blade with the weakest clamping balance.
   • Clamp the balance clamp on the fan blade with the weakest shaking, move it in or out on the edge of the fan blade, and turn on the ceiling fan to find the best position of the balance clamp to control the shaking balance (as shown in the right Figure 17
   • Take the balance sticker, tear off the double-sided tape of the balance sticker, and stick the balance sticker on the center of the blade at the position of the balance clip (as shown in the right Figure 17)

Precautions

Warning
To prevent fire and electric shock, it is forbidden to install and use the electric switch which is not equipped with this ceiling fan.

Maintenance and repair of ceiling fans

1. It is recommended to check the connecting parts of the fan at least once a year, such as a hanger, the hanging pipe fastening screw, and the fan blade, to ensure that their connection is still safe and reliable.
2. Clean the ceiling fan regularly to keep the surface clean and clean. When removing surface dust, please use a soft brush or cloth. When removing oil or laminate, wipe it off with a slightly wet cloth. Do not rinse with water directly.
3. The motor bearing is already provided with grease, do not add lubricating oil to the motor of a ceiling fan. To avoid scratching the surface.

Ceiling Fan Troubleshooting Solutions & Common Problems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>