rizoma PW113 Front Fork Slider Kit User Manual
- June 15, 2024
- rizoma
Table of Contents
rizoma PW113 Front Fork Slider Kit
Product Specifications
- Product Name: Kit Slider Forcella Anteriore (Front Fork Slider Kit)
- Part Number: PW113
- Difficulty Level: Easy
- Estimated Assembly Time: 5-10 minutes
Product Usage Instructions
1. General Instructions
It is essential to carefully read and follow the instructions provided in this user manual. These instructions are an integral part of the product. If you have any doubts or questions regarding the installation or usage of the RIZOMA product, please contact an authorized RIZOMA dealer for assistance. You can find a list of authorized dealers on the RIZOMA website (https://www.rizoma.com).
2. Installation Guidelines
To ensure a correct installation, please adhere to the following guidelines:
- All tightenings should be performed after properly positioning the accessories. Do not force any movable parts once they are locked to avoid compromising the product’s integrity and functionality.
- RIZOMA products may not be compatible with your motorcycle or any previously installed aftermarket accessories. For your safety, we recommend consulting with your trusted authorized RIZOMA dealer before making any installations or modifications.
3. Safety Checks
After installing any RIZOMA product, it is crucial to verify the proper functioning of related components on your motorbike, such as brakes, throttle, clutch, lights, and steering. We highly recommend performing these checks periodically, especially after long trips or extended periods of non-usage.
4. Inspection and Maintenance
Regular inspection and maintenance are necessary for your RIZOMA products. The frequency of inspection should increase with the amount of usage. If you notice any signs of leakage, bending, deformation, cracking, chipping, or wear on your RIZOMA products, no matter how minimal, it is crucial to have them inspected by an authorized RIZOMA dealer before riding again. Under no circumstances should you attempt to repair or modify RIZOMA products or their components. Always replace them with RIZOMA original components.
5. Protective Equipment
RIZOMA products, such as engine/frame/wheel guards, are designed to minimize damage to your motorcycle in the event of a crash ortip-over. However, it is important to note that they cannot prevent all damage under every circumstance. Improper installation of guard protection can lead to oil leaks, resulting in accidents, personal injury, or even death. Always follow instructions carefully and wear appropriate protective equipment while riding.
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
-
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
correct functioning of the product. -
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or their
components, always replace with Rizoma original components. Rizoma products
may not be compatible with your motorcycle or with other aftermarket equipment
installed before. For your safety Rizoma suggests to always contact
your RIZOMA dealer
O.E.M.: original equipment manufacturer.
Product Parts
The engine/frame/wheel guards do not provide any protection to any part of your body in the event of a crash. Always wear appropriate protective equipment. The engine/frame/wheel guards are intended to minimize the dam – age to your motorcycle in the event of a crash or tip over. However, the guards will not prevent all damage under all circumstances. Improper installation of guards protection can result in an oil leak, causing an accident, personal injury or death. Follow instructions carefully
INSTALL SLIDER
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding,this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditionsOnly you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor. Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.