Freshpro KF-P20W Air Purifiers for Home Instruction Manual

Freshpro KF-P20W Air Purifiers for Home Instruction Manual

SAFETY PRECAUTIONS

• 0ur air purifier is used under 120V-~, 60Hz.
• Please unplug the power before cleaning or maintenance.
• This air purifier contains a UV-C emitter, please use it carefully to avoid UV-C radiation.
• Air purifiers obviously damaged must not be operated,
• .According to the working environment. the device needs to be cleaned within 2-4 weeks. Before cleaning, unplug the device, open the bottom cover. pull out the filter, clean the filter with a brush oravacuum
• lfthe UV light is damaged, it must be replaced by the manufactures, its service agent. or similarly qualified persons in order to avoid a hazard,

NOTE
: To reduce the risk of fire, electric shock or injury, please read and understand this user guide before operating this air purifier.

1. This air purifier can be used by children aged from 8 years and above and persons with reduced physical. sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the air purifier in a safe way and understand the hazards involved. Children shall not play with the air purifier. Cleaning and user maintenance shall not be made by children without supervision.

2. f the supplying cord or plug were damaged, they must be replaced by the manufacturer, service agent or similarly qualified persons in order to avoid a hazard.

3.  NOT ROUTE CORD UNDER FURNITURE OR AIR PURIFIER. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.

4. Keep hair. loose clothing and body parts away from air outlet to prevent getting caught in the air purifier

5. D0 not use an extension cord.

6. DO not place the air purifier near sources of heat, such as: stove tops, ovens, radiators or comput- ers

7. Unplug the air purifier from the power supply before servicing.

8. This equipment should be inspected frequently and the dirt that has collected should be removed regularly.

9. D0 not use the air purifier outdoors or on wet surfaces.

10. D0 not use the air purifier in an enclosed space where flammable. combustible or explosive
    gases are present.

11. D0 not use in an area where toxic vapors, flammable dust or oxygen tanks are present. Checked the location and make sure these elements are not present.

12. Place the air purifier on a flat, solid. stable surface. Never place the unit on soft surfaces such as a bed or sofa,

Thank you for purchasing the innovative KF-P20 air purifier. We wish you many years of healthy indoor air with this efficient and effective product.

Ensure that all safety precautions are followed when using this air purifier for the proper operation of the device. These instructions describe the safety precautions to be observed during operation. They are designed to prevent injuries or damage to this device.

PRODUCT DIAGRAM

TECHNICAL SPECIFICATIONS

Instructions for usage

Power :
When plug in. the display will be on for 1 second and a beep sound will be heard. The ‘Power’ button ( ) will be shown and WIFI icon will flash (it will always be on after connecting to the App in your mobile phone). then the air purifier keeps in standby state.

Touch ‘Power button ( ). the air purifier starts up and the air quality indicator around the screen alternates among green, yellow, orange and red color. Display shows symbol ( ) which means the air purifier is working in Auto Mode with medium speed. PM25 value ‘000″ is flashing at the beginning and 10 seconds later it begins to show air quality in real-time data. A quality indicator shows air quality in the corresponding color and the air purifier will automatically adjust the speed according to the air quality table below per 1 minute.

Speed:

Touch “Speed” button air purifier will exit the Auto Mode

Cycles through fan speeds
Speed 1
Speed 2
Speed 3
Auto Mode

Time
Touch Timer’ button – ~ icon flashes in display. Touch the button continually to set the timer from 1-12 hours. After desired timer is chosen. the display will flash the timer 3 times and switch to show PM25 data. It means setting is done when display showing icon. It calculates by counting down every hour. When the time is up, the air purifier shuts down. Touch the button till icon ”

• or long press the button for 2 seconds to cancel timer setting In the timing function, touching the timer button again can check the remaining time.

ION/UV:
Touch ION/UV” button ( ) to turn on the Anion function with according icon %@ showing. Touch the button again to turn on UV function with according icon |J/ showing. Touch it the third time to turn off Anion function. Touch it the fourth time to turn off the UV function

Sleep:
Touch ‘Sleep’ button( ). the air purifier will enter Sleep Mode. Sleep Mode uses the lowest possible fan speed (even lower than speed 1) to create a quite environment. Touch it again to turn back to Auto Mode. The fan speed cannot be adjusted during Sleep mode.

Display turn-off function:
Long press ‘Sleep’ button( ) for 2 seconds to turn off the display. Long press this button again to
exit the function. When turn off the display in sleep mode, the button is in pink. Otherwise, the button is in bright red.

FILTER CHANGE

When working hours reach to 1700H, the filter change indicator icon ( ) in the display flashes in red to remind users to change filter. After the filter is changed. touch the button ( ) . then display will be on for 1 second and enter into standby mode. (If working hours do not reach to 1700H “HEPA’ button on display will not light up) After unplugging and flipping over the device. follow the instructions on the bottom to unscrew out the old filter and install a new one in place.

WIFI OPERATION INSTRUCTION

1. Download Tuya Smart’ from App stores(or scan the QR code on the gift box to download). After
   installment, register by E-mail or mobile number, and then follow below steps.
   a , Connect the mobile phone to a 2.4Ghz internet-connected router.
   b, Activate the phone’s Bluetooth function.
   <. Keep the air purifier, cell phone and router as close as possible.

2. Long press ‘Power button for about 3 seconds until a beep sound. WIFI icon twinkles quickly. It means the air purifier has entered the network state successfully. (If you long press this button for about 10 seconds until 3 beeps, the air purifier exits the connection with mobile APP).

3.  Enter the App. The device will automatically pop up on the screen. Add corresponding device and follow the operation as App indicated

4.  When the App is connected to your air purifier successfully, the WIFI icon on the screen will stop twinkle. and then the App can control the air purifier.

AROMA BOX

1. Draw out aroma box from the top part with 2 fingers pinching at 2 sides of it
2.  Use water-soluble aroma oil and drop on to the sponge.
3. Put the aroma box back into the device, the aroma function will remain on when the device is running.
4. To stop the aroma function or when storing the device. clean the sponge in the aroma box.
5. 0nly drop aroma il into aroma cotton.

MAINTENANCE

After a period of time use, dust on the sensor will affect its sensitivity. We suggest cleaning it every two months. But time can be shortened or extended according to indoor environment,

HOW TO CLEAN THE DUST SENSOR:
Unplug. then open the dust sensor cover and dip the cotton swab in clean water. Clean the lens with
cotton swab. Then wipe the lens with dry cotton swab to make it dry.

OUBLESHOOTING

My air purifier isn’t connecting to the TUYA

• During the setup process. you must be on a secure 2.4GHz WiFi network. Confirm that thenetwork is working correctly.

• Make sure the WiFi password you entered is correct.

  • There should be no spaces at the beginning or end of the password,
  • Test the password by connecting a different electronic device to the router.
  • Ifyou’re manually typing in the SSID and password, double check that both
    are enteredcorrectly

• Try moving your air purifier closer to the router. Your phone should be as close as possibleto your
  air purifier.

• Your router may need to be at a higher location, away from obstructions.

• Make sure vour air purifier and router are away from appliances (such as microwave ovensrefrigera- tors, electronic devices, etc) to avoid signal interference.

• If you’re using a VPN, make sure it’s turned off while setting up your air purifier.

• Disable portal authentication for vour WiFi network. If portal authentication is enabled, the airpurifi- er will not be able to access your WiFi network, and setup will fail,

Note: Portal authentication means that you need to sign in to your WiFi network through aweb page before you can use the Internet.

If your air purifier is not working correctly, please check the following causes.

again Try again in other place
Unusual noise| here s foreign body in the air purifier| Take to service center.
Dirty filter| Replace the filter

PROTECTION

The air purifier has protection function. When the filter cover is removed or not installed properly. the air purifier will automatic cut off.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoonditions:

1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation

Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and. if not installed and used in accordance with the instructionsmav cause harmful interference to radio communications. However. there is no quaranteethat
interference will not occur in a particular installation, If this equipment does cause harmfuinterference to radio or television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try correct the interference by one of the following
measures:

• Reorient or relocate the receiving antenna
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

WARRANTY AND SERVICE

WE GUARANTEE THE UNIT TO BE FREE FROM DEFECTS IN MATERIAL OR WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE DATE OF PURCHASE.

Should this unit be operated under conditions other than those recommended or at voltag es other than the voltage indicated on the unit. or any attempts made to service or modify the unit. this will render WARRANTY VOID.

DISPOSAL : wmm Do not dispose this product as unsorted municipal waste. Collection of such waste separately
for special treatment is necessary.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>