Aocktobar ZX-895 Ultrasonic Jewelry Cleaner User Guide
- June 15, 2024
- Aocktobar
Table of Contents
ZX-895 Operation Guide Diagram
The water volume should be near to the highest water level when cleaning, and should not exceed the highest water level.
After power on, the screen is preset to work for 90S. By short press key, you can set the cleaning time period to 90S, 180S, 280S, 380S, 480S.
You can choose to press the key or the key. Short press the key, the ultrasonic cleaner starts working, and countdown timer clearly shows remaining cleaning time.
You can see the ripples formed on the surface of water In the washing state.
Short press key, the ultrasonic cleaner machine will enter the cleaning cycle of working for 2s and pausing for 1s, which separates the oxygen produced during cleaning, and protects the products from being oxidized. It will be continuously cleaning until the end of the set cleaning time countdown.
Press and hold the key for 2 seconds to turn the sonic jewelry cleaner machine on or off.
The right way to pour out the water after Cleaning.
Dry with a dry cloth. Polishing with polishing cloth.