Aocktobar 01 Ultrasonic Jewelry Cleaner Machine User Guide
- June 15, 2024
- Aocktobar
Table of Contents
Extend the Life of Your Machine
01 Ultrasonic Jewelry Cleaner Machine
The water must be filled into the tank before plugging in the power cord, and the water level should not exceed the maximum water level.
Do not add abrasives or corrosive chemicals to the water tank. Do not put non- waterproof phone or watch into the water tank to clean it.
It is recommended to keep the cleaner away from heat and humid environment. Please be aware of the danger of falling into water or other liquids.
Do not operate without water or use hot water, and do not let the jewelry cleaner run for more than 30 minutes without cooling down. Otherwise it will affect the service life of the jewelry cleaner machine.
Item cleaning attention
- It is best to face up to avoid friction between the lens and the bottom before cleaning the glasses,. Please note: Spectacle frames or lenses that are worn or cracked cannot be used for ultrasonic cleaning.
- For excessive oily surfaces (such as sweat stains on the surface of glasses, oil stains) and jewelry, you can use alkaline cleaners such as hand sanitizer, soap, dishwashing liquid etc.
- If items are oxidized, the oxidation layer has been difficult to remove. You need to use the special polishing machine in the jewelry store to deal with or use oxidizing cleaning agent.
- Watch Bands Cleaner: If you experience some discomfort or skin irritation when wearing a watch, it means it’s probably time to clean it.
Read User Manual Online (PDF format)
Loading......