SAITX HT 001B LED Underwater Light Instruction Manual

**SAITX HT 001B LED Underwater Light Instruction Manual

**

Instruction Manual for LED Underwater Light

The white light provides a brilliant white light for a spectacular effect in your pool. The color light provides brilliant vivid multi-colors with spectacular effects
for your pool and spa. Choose one of the 9 pre-programmed color light shows or select one of the 7 fixed colors to create virtually endless range of dramatic underwater lighting effects for a spectacular effect in your pool .
This lights come in both 12 and 120 volts. For the 120V version of the light, there is a transformer inside the light that switches the voltage from 120V to 12V inside the light.

Technical Specification

Standard input voltage:

• 12V AC (Range: 12~16V AC)
•  □110-120VAC

Standard input watt

LED LIGHT ENGINE

RGBW / RGB| White(lumens)
18W
24W
35W| 18W(~2200lm)
24W(~2650lm)
35W(~3650lm)

RGB/RGBW color 16/15 programs
Pure White 6500K Natural White 5000K Warm White 3000K
Use life: 30,000 hours

RGB/RGBW color Lights with Remote Controller Operation:

Choose color by remote controller (remote control mode):

ON key: Power   On OFF key: Power off
BRI + KEY: brightness +,10 grade in total
BRI- KEY : /brightness -,10 grade in total
B/PU key : slow animation blue/purple
G/YE key : slow animation green/yellows/CY key: slow animation blue/cyan
R key : static red color G key: static greencolor
B key : static blue color WHT key: static white color
YE key : static yellow color (R+G)
CY key : static cyan color (G+B)
PU key : static purple color (R+B)
Rainbow key : 15 colors gradual changing
Four seasons key : 4 colors gradual changing
DISCO key : 15 colors flash changing
PARTY key : 15 colors jump changing

Choose color by turning on & off the power supply (switch control mode): 

Without using the RF remote controller , the mode of change can be controlled by turning on/off
the power. Turn off the power and within 3S re-power on, the LED will enter the next mode, followed by the turn of 16/15 programs .

16 Programs of RGB LED Bulbs

1. 1.Evening sea: slow animation blue/purple

2. Evening rivers: slow animation green/yellow

3. Riviera: slow animation blue/cyan

4. White: neutral white

5. Rainbow: slow animation in green/blue/greenbul/ridable/greenbul/RGB/red

6. River of colors: slow animation in red/green/blue/greenbul/ridable/greenbul/RGB,
   followed by program 8

7. Disco: fast animation, (fast-slow) followed by program5

8. Four seasons: slow animation in regreen/green/greenbul/blue/purple/red

9. Party: fast animation, (fast-slow) followed by program 6

10.  White: sun white

11. Red: fixed color red

12. Green: fixed color green

13.  Blue: fixed color blue

14.  Green-blue: fixed color green/blue(cyan)

15.  Red-green: fixed color red/green(yellow)

16. Blue-red: fixed color blue-red(purple)

15 Programs of RGBW LED Bulbs

1. Evening sea: slow animation blue/purple
2. Evening rivers: slow animation green/yellow
3. Riviera: slow animation blue/cyan
4. White: mix white of RGB
5. Rainbow: RGBW color gradual changing
6. Disco: RGBW color flashing
7.  Four seasons: slow animation in RGB color, followed by program 8
8.  Party: RGBW color jump changing
9.  White: fixed color white
10.  Red: fixed color red
11.  Green: fixed color green
12.  Blue: fixed color blue
13.  Green-blue: fixed color green/blue(cyan)
14.  Red-green: fixed color red/green(yellow)
15. Blue-red: fixed color blue-red(purple)

To Operate these RGB/RGBW lights under switch control mode:

• The 16/15 pre-programmed effects and combinations can be selected using the on/off switch of your pool lights. Just switch off and switch on within 3 second. (Switch control)
• If the light is powered off for more than 20 seconds, it will keep the latest program when it is turned on again. (Memory Function)
• To achieve synchronization, confirm all lamps are installed correctly on the same switch, after they are powered off for more than 20 seconds, switch on and switch off continuously 3 times, and then finally turn them on again. They will all go to program 1. Now you CA select a program for them by switch off and on within 3 seconds. (Re-set Function)

White only, Warm White only, or other single color only lights operation

These lights are not dimmable, and are not compatible with dimmer switches or dimmer relays. They can be wired into a switch or manually turn ON/OFF the lights.

Installation

1. Coil at least 4ft(1.22m) of the cord around the fixture. This allows the light to be serviced after the pool is filled with water.

2. Connect the three light wires to the corresponding light circuit wires in the junction box .Connect the black wire to the wire, white wire to the common and the green wire t ground. Secure the junction box cover.

3. Install the light assembly into the pool niche.
   IMPORTANT: Be sure to insert the TAB on the lower part of the face ring into the niche SLOT (located on the lower part of the niche ) This is important to secure the lower part of the light assembly onto the niche before tightening the pilot screw.

4. Carefully tighten the special bronze pilot screw to secure the upper part of the light assembly onto the niche.

Warranty

The manufacturer warrants this LED underwater lights against defects in material workmanship for a period of two years from the date of purchase. This warranty does not cover the fixture becoming damaged due to misuse, accidental damaged, improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages, water coming into the housing.

Defects in materials and workmanship are exclusive of the following:

• The light with normal LED less than 35W has 3 dead LED or less.
• The light with normal LED more than 35W (included )has 6 dead LED or less

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>