Qwiizlab M2PV-C3 M.2 SSD Encloser User Guide
- June 15, 2024
- Qwiizlab
Table of Contents
Qwiizlab M2PV-C3 M.2 SSD Encloser
Compatible with NVMe PCle and NGFF SATA protocols
First-Time Use
- Thanks for choosing our product. Please read this Quick Start Guide carefully before use.
- This product comes in a compact and sleek design for an external M.2 SSD enclosure. It supports both NVMe and
NGFF/SATA protocols. It fits both M key and B+M key SSD.
It is compatible with SSD in sizes of 2280/2260/2242/2230 mm.
Safety of Use
- Do not touch the product when your hands are wet.
- Keep the product away from water, fire, and corrosive liquids.
Features
- Tool-free design to install SSD without using any screwdriver.
- Dynamic mechanical design to enhance heat dissipation for SSD.
- Plug-and-Play to make it working without installing any drivers or apps.
- Bus power needs no external power supply when using it.
What’s in the box
- Rugged NVMe M.2 SSD Enclosure NVMe & SATA M.2 SSD I > 70-3+
- USB-C cable with both USB-C and USB-A types USB-C & USB-A 01505170 USB-C T-TI
- Aluminum heat sink and silicone thermal pads
How To Install SSD
- Step 1: Slide the plastic cover horizontally to open the SSD enclosure.
- Step 2: Put the silicone thermal pad onto the SSD and insert them into the aluminuim heat sink.
- Step 3: Plug the silicone rubber nail into the hole to secure the SSD.
- Step 4: Slide the plastic cover horizontally back to close the SSD enclosure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>