mikroTIK RBLHGR &R11e-4G Routers and Wireless

Quick Guide

This device needs to be upgraded to Router OS v7.2 or the latest stable version, to ensure compliance with local authority regulations!

It is the end users’ responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Microtask radio devices must be installed according to instructions.

This “LHGR kit” series Quick Guide covers models: RBLHGR&R11e-LTE6 (LHG LTE6 kit), RBLHGR&R11e-LTE-US (LHG LTE kit), RBLHGR&R11e-LTE (LHG LTE kit), RBLHGR&R11e4G (LHG 4G kit).

This is a wireless network device. You can find the product model name on the case label (ID).

Please visit the user manual page on https://mt.lv/um for the full up-to- date user manual. Or scan the QR code with your mobile phone.

Technical specifications, brochures, and more info about products are at https://mikrotik.com/products

The most important technical specifications for this product can be found on the last page of this Quick Guide.

Configuration manual for software in your language with additional information can be found at https://mt.lv/help

If you need help with configuration, please seek a consultant https://mikrotik.com/consultants

This device accepts input of 24 V DC, 0.38 A power adapter connected to PoE, which is provided in the original packaging of this device. When using a PoE injector and a different power source, the range is 12-57 V (direct current).

First steps:

• Open the Ethernet port door;
• Insert the SIM card into the slot, with the chip facing UP;
• Connect the device to the included PoE injector with Ethernet cable to the data power end;
• Connect the data end of the PoE injector to the computer;
• Connect the power adapter to the PoE injector;
• Open the https://192.168.188.1 in your web browser;
• User name: admin, and there is no password (or, for some models, check user and wireless passwords on the sticker);
• Use the check for update option to upgrade the device to the latest version. You must have an active SIM card with available data;
• The device will reboot;
• Connect again and in the Quickset menu set your country, to apply country regulation settings;
• Secure your device and set a strong password.

Safety Information:

• Before you work on any Microtask equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
• Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
• This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
• This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
• We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
• This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures.
• In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.

Exposure to Radio Frequency Radiation: This Microtask equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment. This Microtask device should be installed and operated no closer than 130 centimeters from your body, occupational user, or the general public.

Manufacturer: Microtools SIA, Brevis’s gave 214i Riga, Latvia, LV1039.

Note:

English, For some models, check the user and wireless passwords on the sticker.

Federal Communication Commission Interference Statement

 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  protection against harmful interference in a commercial installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

Innovation, Science and Economic Development Canada

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

UKCA marking

CE Declaration of Conformity

Hereby, Microtools SIA declares that the radio equipment type Router BOARD is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

Technical Specifications

Product Power Input Options (DE)| DC Adapter Output Specification, (V/A)| IP class of the enclosure| Operating Temperature
PoE In Ethernet Port| 24 V / 0.38| IP54| -30°..+60°C

66933

References

• MikroTik Routers and Wireless - Buy
• MikroTik Routers and Wireless - Buy
• MikroTik Routers and Wireless - Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>