EMERSON GFK-3244F PAC Machine Edition User Manual
- June 15, 2024
- Emerson
Table of Contents
EMERSON GFK-3244F PAC Machine
**Edition User Manual**
Warnings and Caution Notes as Used in this Publication
Warning notices are used in this publication to emphasize that hazardous
voltages, currents, temperatures, or other conditions that could cause
personal injury to exist in this equipment or may be associated with its use.
In situations where inattention could cause either personal injury or damage
to equipment, a Warning notice is used.
Caution notices are used where equipment might be damaged if care is not taken.
Note :
Notes merely call attention to information that is especially significant to
understanding and operating the equipment.
These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible contingency to be met during installation, operation, and maintenance. The information is supplied for informational purposes only, and Emerson makes no warranty as to the accuracy of the information included herein. Changes, modifications, and/or improvements to equipment and specifications are made periodically and these changes may or may not be reflected herein. It is understood that Emerson may make changes, modifications, or improvements to the equipment referenced herein or to the document itself at any time. This document is intended for trained personnel familiar with the Emerson products referenced herein.
Emerson may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not provide any license whatsoever to any of these patents.
Emerson provides the following document and the information included therein as-is and without warranty of any kind, expressed or implied, including but not limited to any implied statutory warranty of merchantability or fitness for particular purpose.
PAC Product Information
Revision History
Release Notes
This IPI includes changes from PME 10.2 and PME 10.2.9762. When upgrading from Versions of PAC Machine Edition older than 10.0, your PME window settings and system options may be reset.
PAC Machine Edition
Functional Compatibility
Problems Resolved by this Release
PAC Machine Edition 10.2 and 10.2.9762 fixed the following defects:
New Features
PAC Machine Edition 10.2 and 10.2.9762 makes various improvements on the following:
Dropped Features
PAC Machine Edition 10.2 and 10.2.9762 dropped the following:
View and Control
Functional Compatibility
Problems Resolved by this Release
PAC View and Control 10.2 and 10.2.9762 fixed the following defects:
New Features
PAC View and Control 10.2 makes various improvements on the following:
Dropped Features
PAC View and Control 10.2 dropped the following:
Related Documents
For additional information about PAC Machine Edition and PAC Products, refer
to the following publications:
Additional Support
For support and information, visit Emerson’s support link located at the end
of this document. The files for this manual and other related documentation
are available there. Additional region- and language-specific websites and
telephone numbers are found there as well.
General Contact Information
Home link:
http://www.emerson.com/industrial-automation-controls
Knowledge Base:
https://www.emerson.com/iac-support
Technical Support
Americas
Phone: 1-888-565-4155
1-434-214-8532 (If toll-free option is
unavailable)
Customer Care (Quotes/Orders/Returns):
[email protected]
Technical Support: [email protected]
Europe
Phone:+800-4444-8001
+420-225-379-328 (If toll-free option is unavailable)
Customer Care (Quotes/Orders/Returns):
[email protected]
Technical Support:
[email protected]
Asia
Phone: +86-400-842-8599
+65-3157-9591 (All other Countries)
Customer Care (Quotes/Orders/Returns):
[email protected]
Technical Support:
[email protected]
Any escalation request should be sent to: [email protected]
Note : If the product is purchased through an Authorized Channel Partner,
please contact the seller directly for any
support.
Emerson reserves the right to modify or improve the designs or specifications
of the products mentioned in this manual at any time without notice. Emerson
does not assume responsibility for the selection, use or maintenance of any
product. Responsibility for proper selection, use and maintenance of any
Emerson product remains solely with the purchaser.
© 2023 Emerson. All rights reserved.
Emerson Terms and Conditions of Sale are available upon request. The Emerson
logo is a trademark and service mark of Emerson Electric Co. All other marks
are the property of their respective owners.
References
- customercare.cn 正在出售或转让
- Industrial Automation & Controls | Emerson US
- Emerson PACSystems/Movicon Customer Center