MONSGEEK MG75 Hotkey Mechanical Keyboard User Manual
- June 15, 2024
- MONSGEEK
Table of Contents
MONSGEEK MG75 Hotkey Mechanical Keyboard
Hotkey
System Commands (Windows)
System Commands (Mac)
- F1: Decrease display brightness
- F2: Increases display brightness
- F3: Open mission control
- F4: Activate Siri
- F7: Skip back (Audio)
- F8: Pause/Play (Audio)
- F9: Skip forward (Audio)
- F10: Mute
- F11: Volume down
- F12: Volume up
- Left Win Option
- Left Alt Command
- Right Alt Command
Fn + (F1 ∼ F12)
- F1 ∼ F12
Operation Mode Switch
- The built-in battery will start to power when the back switch is in the non-USB mode (either Mac or Win). The keyboard will switch to USB wired mode automatically once the USB cable is plugged in.
- The switch will complete when the LED indicator flashes 3 times.
Customization Instruction
- The key/lighting effects customization can be programmed with MonsGeek Driver.
- Please visit monsgeek.com/download/ to download the driver.
Note:
- MG75 Battery Level Indicator
- Low Battery: Slow flashing white LED
- Charging: Constant white LED
- Fully Charged: LED off
Warranty and Service Statement
- MONSGEEK provides a One-Year warranty for customers in mainland China. For other regions, please contact your seller (MonsGeek distributor) for a specific warranty policy.
- If the warranty window expires, customers need to pay for repairs. MONSGEEK will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happens during self-repair.
- Dissembling the keyboard without the manufacturer/seller’s instruction will immediately void the warranty.
- The return and warranty policy may vary on different platforms and are subject to the specific distributor at the time of purchase.
Precaution
Man-made damage is not limited to immersion, falling off, pulling off the
wires with excessive force, etc.
Read User Manual Online (PDF format)
Loading......