MONSGEEK MX108 Wireless Keyboard and Mouse Combo User Manual
- June 13, 2024
- MONSGEEK
Table of Contents
Thank you for supporting Akko
To provide you with a better user experience, please read this manual
carefully before using the product.
Packing List
System Requirement
Windows®XP / Vista / 7 / 8 / 10 or higher version
Connectivity Method
Turn the keyboard power switch to the ON position and insert the USB receiver
into an available USB port to complete the 2.4G connection and start using it.
Independent Indicator
Status | Indicator Position | LED Indicator |
---|---|---|
Num | LED Indicator 1 | Steady white |
Caps | LED Indicator 2 | Steady white |
Low Battery | LED Indicator 3 | Slow flashing white LED |
Charging | Steady red | |
Fully Charged | Steady red → Light off |
MX108 HotKeys
Fn+
| F1|
=
| My computer
---|---|---|---
F2| E-mail
F3| Windows search
F4| Browser homepage
F5| Multimedia player
Fn+
| F6|
=
| Play/Pause
---|---|---|---
F7| Previous song
F8| Next song
F9| Stop
F10| Bookmark
Fn+
| F11|
=
| Refresh
---|---|---|---
F12| One-Key Hibernate
W| Swap W A S D with ↑↓ ← →
MX108 System Commands (Mac)
F1 | Decrease display brightness |
---|---|
F2 | Increase display brightness |
F3 | Open mission control |
F4 | Activate Siri |
F7 | Skip back (Audio) |
F8 | Pause/Play (Audio) |
F9 | Skip forward (Audio) |
F10 | Mute |
F11 | Volume down |
F12 | Volume up |
Left Win | Option |
Left Alt | Command |
Right Alt | Command |
--- | --- |
Right Win | Option |
MX108 System Commands (Windows)
Bluetooth Pairing
After turning on the keyboard, press FN+E/R/T to enter Bluetooth mode. Press
and hold the FN+E/R/T combination key for 3 seconds to put the keyboard in
pairing mode, with three LED indicator lights flashing quickly. Once the
connection is established, the indicator light will stay on for 2 seconds. If
the device fails to connect, the indicator light will turn off and the
keyboard will enter sleep mode.
2.4G Pairing
After turning on the keyboard, press FN+Y to enter 2.4G mode. Then press and hold the FN+Y combination key for 3 seconds to enter pairing mode, with the three indicator lights flashing quickly, and insert the USB receiver. Once pairing is successful, the LED indicator lights will return to normal. If no available device is found within 30 seconds, the three LED indicator lights will turn off, and the keyboard will enter sleep mode.
MX108 Bluetooth + 2.4G Wireless Mouse Overview
Specifcations
- Left Click
- Right Click
- Scroll Click
- Power Switch
- Mode Switch
- 2.4G Receiver Slot
Model | MX108 | Mode | BT + 2.4G Wireless |
---|---|---|---|
Length | 114mm | Voltage | Built-in lithium battery: 3.7V/300mAH |
Width | 33mm | Charge | USB 5.0V |
Height | 60mm | Polling Rate | Bluetooth: 133Hz 2.4G: 125Hz |
Weight | ≈84g | Wireless Distance | 10m 360° |
LED Indicator |
Red
| DPI| Default 1200
Mode Switch| Short press to switch to 2.4G mode. (The indicator light will be
green) Short press again to switch to Bluetooth mode.
(The indicator light will be blue)| 2.4G Pairing| Press left and right clicks
to power on. (The green indicator flashes quickly)
Bluetooth Pairing| Press and hold the pairing button for 3 seconds to enter
pairing mode. (Pairing duration is 2 minutes)
Operating Systems| WIN2000/Win7/Win8/Win10/ Android/IOS/Mac| Key Functions| *
Left/Right click
- Power switch/Mode switch
- Scroll click
MONSGEEK Warranty and Service Statement
-
MONSGEEK offers a One-Year warranty for customers in mainland China.
For other regions, please contact your seller (MonsGeek distributor) for specific warranty details. -
If the warranty period expires, customers are responsible for repair costs.
MONSGEEK provides instructions for self-repair if preferred, but users assume full responsibility for any losses incurred during the process. -
Disassembling the keyboard without manufacturer/seller’s instruction will void the warranty immediately.
-
Return and warranty policies may vary across platforms and are subject to the specific distributor’s terms at the time of purchase.
Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an District,
Shenzhen, China
Tel: 0755-23216420
Website: www.monsgeek.com
Origin: Shenzhen, China
WARNING
Water and Beverages can’t be poured into the Keyboard.
Made in China
instagram.com/akkogear
facebook.com/akkogear
tiktok.com/@akkogear
References
- Akko (@akkogear) • Instagram photos and videos
- TikTok - Make Your Day
- 魔极客中文官方网站 - MonsGeek
- MonsGeek - Make Cool Gears Accessible.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>