PUNKWOLF M57F Outer Bluetooth Light Speaker User Manual
- June 14, 2024
- PUNKWOLF
Table of Contents
User manual
M57F Outdoor bluetooth lighting speaker
what’sin the box?
Product figure
- TWS
- Light key
- Volume”-” / Last song
- Pause/play incoming call answer/reject
- On/Off
- Volume”+” / Next song
- TYPE-C connector
- pilot lamp
- TF card
- AUX
Bluetooth
1.Bluetooth connection
Long press
Turn on the speaker and Enter pairing mode
Lighting is runing fast if bluetooth device not connected , use the bluetooth
device to search for” MS7F ” and click to connect.
Short press x1…………………… Audio switch mode
Short press……………….. disconnect bluetooth device
2.Light mode
Short press x1
Double click turn on/turn off
3.Music control
Short press x1……………….Volume”–/”+”
Long press……………. Last/Next song
**Short press x1………………. Play/Pause
4. Answer the phone**
Short press x1 ………………Answer/Hang
up
Long press …………………..Reject call
****Short press x2………………….. Dial the last call
TWS mode
**** Short press x2…………… Double click “M’ TWS ON/OFF
Product charge
Red light on ……………….The battery is charging
Red light off ……………………….Fully charged
To preserve battery lifespan fully charge at least once every 45days
Specifications
Product name | LED Protable Bluetooth Speaker |
---|---|
Model name | M57F |
Bluetooth version | V5.3 |
Product size | 9491213mm |
Bluetooth distance | Om ( open distance ) |
Play time | 4 hours |
Play mode | BT/TWS/TF/ AUX |
Battery | 1200mAh |
Charging input | DC SV-1000mAh |
Charging time | ≤ 2 hours( 5V/1A ) |
Output power | 10W |
Distortion rate | THD<10% |
Frequency response | 20Hz-20KHz |
The horn | 57MM “2 |
Charging and battery information :
- This product has a built-in non-removable and rechargeable battery. Please use theequipped micro USB cable to charge the battery.
- The charging current voltage is5V/1A;: and the product can not be recharged witha chargerof more than 5V/1A.
- Please choose the charger that passes the regular manufacturer’s safety certification.
- Repeated charging on the speaker will cause battery performance degradation overtime » whichis a normal phenomenon for all rechargeable batteries.
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:
- This device may not cause harmful interference,and
- This device must accept any interference received, including interference thatmay cause undesired operation.
- Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>