Xtorm FS5451 Power Bank User Manual
- June 15, 2024
- Xtorm
Table of Contents
FS5451 POWER BANK 45.000
Specifications
- Capacity: 45.000 mAh Li-Polymer / 166.5Wh
- Outputs:
- 1x USB-C PD 67W
- 1x USB-C PD 27W
- 1x USB-A 22.5W (QC 3.0 18W / SCP 22.5W)
- Input: USB-C PD 67W
- Dimensions: 178x97x30.4 mm
- Weight: 692 grams
- Included in the box: 1x USB-C PD cable, 1x Manual
- 45.000 mAh Li-Polymer / 166.5Wh
- 1x USB-C PD 67W
- 1x USB-C PD 27W
- 1x USB-A 22.5W (QC 3.0 18W / SCP 22.5W)
- USB-C PD 67W input
- 178x97x30.4 mm
- 692 grams
- 1x USB-C PD cable
- 1x Manual
When using multiple outputs
Product Overview
- Output USB-C PD 27W
- Output USB-A 22.5W
- QC 3.0 18W / SCP 22.5W Output
- Output USB-C PD 67W
- Power Button
- Digital Power Indicator
- Official Xtorm Label
Charging Your Device
- 3A: Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
- 3B: Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning® or a Micro USB cable.
Compatible Devices
Connect the USB-C end of the charging cable to the USB-C PD output of the
Power Bank and the other end to the input of your device. The charging will
start automatically. Charging some devices requires a charging cable other
than the one supplied.
Recharging the Power Bank
- 4A: Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
- 4B: For the fastest charging possible, use a 67W charger. This will fully recharge the Power Bank within 3.5 hours.
LED Power Indicator
-
5A: Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved Power
Button function:- Single press to turn on/off the display
- Double press to fully turn on/off the Power Bank
-
5B: The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
-
5C: The fast charge indicator will light up when you are using the correct cable for fast charging your device. (67W USB-C PD and higher).
In the Box
- FS5451 Power Bank
- USB-C PD Cable
- Manual
RECYCLING
When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
XTORM SAFETY CHECK
-
TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating. -
OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached device from overcharging. -
SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently devides power between attached devices. -
SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm chargerand your device from short circuit damage. -
A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and meet all safety requirements. -
HIGH EFFICIENCY
Our power products are built to power your device as efficient as possible. This en-sures the least possible loss of energy during the charging process.
WARNINGS
Don’t drop, dissemble or attempt to repair the charger by yourself. Avoid
exposure to water or high humidity. Don’t expose to any heat source. Keep out
of reach of children. Don’t use in the presence of flammable gas. The warranty
will lapse in the event of improper use. Telco Accessories has tested the
product in a test environ-ment. All statements/declarations made by Telco
Accessories about the (operation) of the product are based on the results
obtained from such tests. These results/statements/declarations cannot be
guaranteed, for example in cases of deviating or injudicious use and/or use in
a different environment.
EU DECLARATION OF CONFORMITY
(in accordance with EN ISO/IC 17050-1)
FAQ
Q: How long does it take to fully recharge the Power Bank?
A: Using a 67W charger, it takes approximately 3.5 hours to fully recharge
the Power Bank.
Q: What devices are compatible with the Power Bank?
A: The Power Bank is compatible with devices that support USB-C PD, USB-A
QC 3.0, and SCP charging.
HIGHER QUALITY = LOWER IMPACT
CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800
TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten
The Netherlands
MOREENERGY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>