beko VCC 4520 WR Vacuum Cleaner User Manual

June 15, 2024
Beko

beko VCC 4520 WR Vacuum Cleaner

Please read this manual first! Dear Valued Customer, Thank you for preferring this Beko appliance. We hope that you get the best results from your appliance which has been manufactured with high quality and state-of-the-art technology. For this reason, please read this user manual and all other provided documents carefully before using the appliance and keep it as a reference for future use. If you hand over the appliance to someone else, give the user manual as well. Follow the instructions by paying attention to all the information and warnings in the user manual.

Meanings of the Symbols

The following symbols are used in various sections of this manual:

Important information and useful hints about usage.

WARNING
Warnings against dangerous situations concerning the security of life and property.

Protection class for electric shock. This product has been manufactured in environmentally friendly modern plants without causing any harm to nature.

Important safety and environmental instructions

This section contains safety in-structions that will help protect from the risk of personal injury or property damage. Failure to follow these instruc- tions invalidates the granted warranty.

General safety

  • This appliance complies with the international security standards.
  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be done by children without supervision.
  • Do not use it if the power cable or the appliance itself is damaged. Contact an authorized service.
  • Your mains power supply should comply with the information supplied on the rating plate of the appliance.
  • The main supply of the appliance must be secured with a minimum 16 A fuse.
  • Do not use the appliance with an extension cord.
  • To prevent the power cable from getting damaged, make sure that it doesn’t get stuck, twisted or rubbed against sharp surfaces.
  • Do not touch the appliance or its plug when it is plugged if your hands are damp.
  • Do not pull the power cable when unplugging the appliance.
  • Do not vacuum flammable materials and when vacuuming cigarette ashes make sure that it gets cold.
  • Do not vacuum water or other liquid materials.
  • Protect the appliance from rain, humidity and heat sources.
  • Never use the appliance in or near to combustible or inflammable places and materials.
  • Unplug the appliance before cleaning and maintenance.
  • Do not dip the appliance or its cable in water to clean it.
  • Check the hose of the appliance regularly. Do not use if it is damaged and contact an authorized service.
  • Do not attempt to dismantle the appliance.
  • Only use the original parts or parts recommended by the manufacturer.
  • If heavily used for cleaning dust such as cement or grout the dust indicator will lit earlier than expected, in such case replace the dust bag even if it is empty.
  • Do not use the appliance without filters; otherwise, it can get damaged.
  • When vacuuming the stairs, the appliance should be located below the user.
  • If you store the packaging material, keep it out of the reach of children.

Compliance with the WEEE Directive and Disposing of the Waste Product
This product complies with the EU WEEE Directive (19/2012/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high-quality parts and materials that can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection centre for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centres.

Compliance with RoHS

Directive
The product you have purchased complies with the EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information

The packaging materials of the product are manufactured from recyclable materials by our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Your vacuum cleaner

Overview

  1. Handle
  2. Vacuum control
  3. Telescopic tube
  4. Telescopic tube adjustment latch
  5. Carriage handle
  6. Button for opening the dust container
  7. Suction nozzle
  8. Hose cap
  9. Parquet/carpet brush
  10. Upper cover
  11. Wheel
  12. Cord winding button
  13. HEPA filter cover
  14. On/Off button
  15. Sliding control panel
  16. Dust bag fullness indicator
  17. Hose

Technical data

  • Supply voltage : 220-240V~ 50/60 Hz
  • Power: 1600 W Nom 2000 W Max
  • Operating radius: 9 m
  • Suction power: 360 W
  • Filter: HEPA 12

Rights to make technical and design changes are reserved. The values which are declared in the markings affixed on your appliance or other printed documents supplied with it represent the values which were obtained in the laboratories under the pertinent standards. These values may vary according to the usage of the appliance and ambient conditions.

Usage

Intended use
The appliance has been designed for household use and is not suitable for industrial use.

Attaching/removing the hose

  1. To attach the hose (17), push the hose cap (8) in the arrow direction in order to match it with the suction nozzle and rotate it clockwise.
  2. To remove the hose (17), rotate the hose cap (14) anti-clockwise and pull it.

Attaching/removing the telescopic tube

  1. Attach the telescopic tube (3) to the handle (1).
  2. Pull the telescopic tube (3) from the handle (1) to remove it.
  3. To adjust the length of the telescopic tube, push the telescopic tube adjustment latch (4) in the arrow direction and pull it from the end of it.

Attaching/removing the parquet/carpet brush

  1. Attach the telescopic tube (3) to the parquet/ carpet brush (8).
  2. Pull the telescopic tube (3) from the parquet/ carpet brush (8) to remove it.

Adjusting the parquet/carpet brush
By pressing the adjustment latch located on the parquet carpet brush (9);
Use ” ” position for hard floors and parquet.

Use ” ” position for rugs and carpets.

Operation

  1. Plug in the appliance after pulling the power plug located at the back of the appliance.
  2. Press the on/off button to switch (14) on your appliance.

Adjusting the suction power
You can adjust the suction power level by moving the slide on the control panel.

  1. Use your appliance at the “min” level to clean curtains, tablecloths and sofas.
  2. You can use it while the slide is in the middle level to clean carpets and rugs.
  3. Use your appliance at “max” level to clean parquet, wooden and hard floors.

Vacuum control
You can lower the suction power of the parquet/ carpet brush (9) by pulling the vacuum adjustment control (2) located on the handle (1) at any time without needing to use the sliding control panel (15) on the appliance.

Dust Indicator
When the dust bag is full, the dust bag fullness indicator (16) will turn red. Replace the dust bag (see 4.1).

Accessories
Crevice tools Suitable for cleaning surfaces difficult to clean, such as areas under sofas and furniture.

Dust brush
Suitable for cleaning objects such as curtains, floorings, delicate fragile items, couches, sofas etc.
WARNING: Do not perform cleaning tasks using the end part of the handle (1).

Switching off the vacuum
cleaner and parking feature Switch off the appliance with the on/off button (14) and unplug it. Press the cord winding button (12) to rewind the power cord.

Vertical parking feature
Insert the hook of the parquet/carpet brush (9) into the parking groove located at the bottom section of the appliance.

Horizontal parking feature
Insert the hook of the parquet/carpet brush (9) into the parking groove located at the rear section of the appliance.

Cleaning and care
Switch off and unplug the appliance before cleaning it.
WARNING: Never use gasoline, solvent, abrasive cleaning agents, metal objects or hard brushes to clean the appliance.

Replacing the dust bag

When the dust bag is full, the dust bag fullness indicator (16) will turn red.

  1. Open the top lid by pressing the dust container opening button (6).
  2. Remove the dust bag from its guide on the tray.
  3. Dispose of the full dust bag.
  4. Place the new dust bag on the guide of the tray.
  5. Make sure that it is fully seated.
  6. Close the upper cap of the appliance.

WARNING: Do not force the upper cover to close it, otherwise the plastic parts can be damaged.

WARNING: Dust bags purchased from locations other than the authorized dealers and services are not original. Such dustbags have a lesser quality and they become torn in a shorter period and render your appliance non- operational. Faults caused due to using inauthentic dust bags are not covered by the warranty.
WARNING: Do not wash the dust bag.

Cleaning the filters
After each 5 dust bag replacement (may vary depending on the frequency and area of usage), clean the filters.
WARNING: Do not use appliances producing hot air such as a hair dryer or heater to dry the filters.
WARNING: Do not install the filters without completely drying them; otherwise, the smell of moisture may occur during use, water can leak from the back of the appliance or the filters may get damaged.

WARNING: Attach the filters into their places after they have dried.

Motor protection filter

  1. Open the top lid by pressing the dust container opening button (6).
  2. Remove the foam filter from the grid inside.
  3. After washing the motor protection filter under running water, wring it out slightly and let it dry (for 24 hours minimum).

Cleaning and care

HEPA filter

  1. Open the HEPA filter cover (13) located on your appliance and remove the HEPA filter by pulling it from its handle.
  2. Shake off the HEPA outlet filter to eliminate the dust on it. After that, you can wash it by holding its clean side under running cool water.
  3. If you wash the HEPA filter, dry it at room temperature (for 24 hours minimum). Do not use it before ensuring that it is completely dry.

Storage
If you do not intend to use the appliance for a long time, store it carefully. Unplug the appliance. Keep the appliance out of the reach of children.

Handling and transportation
During handling and transportation, carry the appliance in its original packaging. The packaging of the appliance protects it against physical damage. Do not place heavy loads on the appliance or the packaging. The appliance may get damaged. Dropping the appliance may render it non-operational or cause permanent damage.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals