Aqara WS-EUK01 Wireless wall-mounted switch White Apple HomeKit User Manual
- June 4, 2024
- Aqara
Table of Contents
Smart Wall Switch H1 EU (No Neutral)
User Manual
Product Profile
Based on the Zigbee 3.0 wireless communication protocol, the Aqara Smart Wall
Switch H1 EU (No Neutral) is a smart switch that turns on and off the power of
lights and other electrical devices. After binding with an Aqara hub, it can
implement remote control via the Aqara Home app, timed control and other
functions, and can work with other smart devices in smart home automation. *
This product requires a compatible Zigbee 3.0 hub. Some features require a
specific hub. For a detailed list, please
visit: www.aqara.com/support
Warnings
- This product is not a toy. Please keep children away from this product.
- This product is designed for indoor use only.
- Do not use in humid environments or outdoors.
- Beware of moisture. Do not spill water or other liquids onto the product.
- Do not place this product near a heat source. Do not place it in an enclosure unless there is normal ventilation. Do not attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
- This product is suitable for improving the quality of your home life and reminding you about the device’s status. If a user violates the product use instructions, the manufacturer will not be liable for any risks and property losses.
Installation Method (The picture shows the Double Rocker version as an
example)
**** Please make sure that the power at circuit breaker or fuse box is turned
off before wiring!
- Open the switch panel with a flat-blade screwdriver.
- Loosen the terminal screw on the back of the switch with the screwdriver, connect the live wire to hole L, and the load (light) wire to the hole L1 and L2 (corresponding to the left and right buttons respectively), and tighten the terminal screws after confirming that the wiring is correct.
- Mount the switch to the wall junction box with the attached screws and mount the switch plate.
- Turn on main power at the circuit breaker, and test the switch by pressing the button. If the light can be controlled normally, the switch is working properly!
Quick Setup
- Please add the hub to the Aqara Home app according to the Hub Quick Start Guide.
- Please open the Aqara Home app, and then tap “+” in the top right corner to enter “Add Device (Accessory)” page. Tap the code-scanning icon on the upper right corner, and scan the QR code on the package box, user manual or the back of the switch, or find and select “Smart Wall Switch H1 EU (No
Neutral,Single Rocker/Double Rocker)”, and add it according to instructions.
- If the connection fails, please move the hub closer to the switch, connect to power and try again.
Effective Range Test: Quick press the button on the device 3 times. If the Hub makes voice prompts, it indicates that the device can communicate effectively with the Hub.
Indicator Light Description
| Indicator Light Status | Description |
|---|---|
| Blue light flashes once | The device is powered on |
| Blue light flashes quickly | Zigbee network is connecting |
| Blue light is steady on | Zigbee network works properly and the switch is |
turned on
Red light flashes quickly| Overload and high-temperature alarm
Red light flashes slowly| Zigbee network is not connected
Red light is steady on| The switch panel does not match
the in-wall power supply module
Specifications
Model: WS-EUK01 / WS-EUK02
Dimensions: 85.8×86×37.55mm
Wireless Protocol: Zigbee 3.0
Electrical Rating: 100-250VAC, 50/60Hz, Max. 8A (resistive load), μ
Minimum Power: 3W (typical)
Operating Temperature: 0℃～40℃ (32°F～104°F)
Operating Humidity: 0%~95% RH, Non-condensing
Zigbee Operation Frequency: 2405-2480MHz
Zigbee Maximum Output Power ≤ 13dBm
What’s in the Box: Smart Wall Switch x 1, Quick Start Guide x 1, Screw x 2
Online Customer Service: www.aqara.com/support
Manufacturer: Lumi United Technology Co., Ltd. Address: 8th Floor, JinQi
Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District,
Nanshan District, Shenzhen, China.
Under normal use of conditions, this equipment should be kept a separation
distance of at least 20cm between the antenna and the body of the user.
EU Declaration of Conformity
Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment
type [Smart Wall Switch H1 EU (No Neutral, Single Rocker), WS-EUK01/Smart Wall
Switch H1 EU (No Neutral, Double Rocker), WS-EUK02] is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: http://www.aqara.com/DoC/
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as the terms and conditions of such collection points.
UK Declaration of Conformity
Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment
type [Smart Wall Switch (No Neutral, Single Rocker), WS-EUK01/Smart Wall
Switch (No Neutral, Double Rocker), WS-EUK02] is in compliance with Directive
2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696). The full text of the
UK declaration of conformity is available at the following internet address:
http://www.aqara.com/DoC/
Scan to get the Zigbee 3.0 Install Code
- Please read this manual carefully and keep it in a safe place.
- If necessary, the contents of this manual will be modified or adjusted without special notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>