Mircom LT-6726 Hands Free Building Telephone Entry Systems Instruction Manual
- June 15, 2024
- Mircom
Table of Contents
Mircom LT-6726 Hands Free Building Telephone Entry Systems
Product Information
Specifications
- Model: TX3-UFTR
- Mounting Hole Quantity: 2 on each side
- Trim Ring Dimensions: 502mm x 429mm x 336mm
- Cutout in Wall Dimensions:
- Height: 17 1/2″ (445mm)
- Width: 10 5/8″ (270mm)
- Depth: 2″ (51mm)
- Universal Enclosure Dimensions: 264mm x 116mm x 42mm
Product Usage Instructions
Flush Mount the Universal Enclosure with the Trim Ring
- Find a suitable location for the enclosure.
- Cut an opening in the wall using the provided dimensions.
- Insert the trim ring into the wall cutout.
- Attach the trim ring to vertical supports using four appropriate fasteners. The mounting holes are located on each side of the trim ring. Install the trim ring with the arrow pointing up.
- Insert the universal enclosure with the rain hood inside the trim ring.
- Secure the universal enclosure inside the trim ring using the four included nuts.
Frequently Asked Questions
- Q: Where can I find additional information on TX3 lobby units?
- A: For all other information on TX3 lobby units, please refer to the document LT-969 available on the Mircom website at www.mircom.com.
Flush Mount the Slim-Line Enclosure with the Trim Ring
- Find a suitable location for the enclosure.
- Cut an opening in the wall. The dimensions of the cutout are shown above.
- Insert the trim ring into the wall cutout.
- Attach the trim ring to horizontal supports using four appropriate fasteners. The mounting holes are on the top and bottom of the trim ring. They are shown above.
- Note :Install the trim ring with the arrow pointing up.
- Note :If you are mounting the trim ring to a wall stud, attach one side to the wall stud with appropriate fasteners, and leave the other side free.
- Note :Install the trim ring with the arrow pointing up.
- Insert the universal enclosure wit the rain hood inside the trim ring.
- Secure the universal enclosure inside the trim ring using the four included nuts as shown above.
For all other information on TX3 lobby units, see the document LT-969 on www.mircom.com.
Installation Instructions
Flush Mount the Universal Enclosure with the Trim Ring
- Find a suitable location for the enclosure.
- Cut an opening in the wall. The dimensions of the cutout are shown above.
- Insert the trim ring into the wall cutout.
- Attach the trim ring to vertical supports using four appropriate fasteners. The mounting holes are shown above.
- Note: Install the trim ring with the arrow pointing up.
- Note : If you are mounting the trim ring to a wall stud, attach one side to the wall stud with appropriate fasteners, and leave the other side free.
- Insert the universal enclosure with the rain hood inside the trim ring.
- Secure the universal enclosure inside the trim ring using the four included nuts as shown above.
For all other information on TX3 lobby units, see the document LT-969 on www.mircom.com.
Flush Mount the Slim-Line Enclosure with the Trim Ring
- Find a suitable location for the enclosure.
- Cut an opening in the wall. The dimensions of the cutout are shown above.
- Insert the trim ring into the wall cutout.
- Attach the trim ring to horizontal supports using four appropriate fasteners. The mounting holes are on the top and bottom of the trim ring. They are shown above.
- Note : Install the trim ring with the arrow pointing up.
- Insert the universal enclosure with the rain hood inside the trim ring.
- Secure the universal enclosure inside the trim ring using the four included nuts as shown above.
For all other information on TX3 lobby units, see the document LT-969 on www.mircom.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>