Hamilton Buhl PA-25E amp-up Mini Instruction Manual
- June 4, 2024
- Hamilton Buhl
Table of Contents
Instruction Manual
Model #PA-25E
Description
1 | Auto Channel Pairing Button | 6 | Power On/Volume Control Dial (Amp) |
---|---|---|---|
2 | Amplifier Charging Socket (DC 5V) | 7 | Wireless Mic Volume + Button |
3 | Wired Microphone Jack | 8 | Wireless Mic Volume – Button |
4 | Power On Indicator (Amp) | 9 | Wireless Mic Power Switch |
5 | Charging Indicator (Amp) | 10 | Wireless Mic Charging Socket (DC 5V) |
Included Components
(1) Amplifier
(1) Charging Cable
(1) Wireless Microphone
(1) Belt
(1) Instruction Manual
Features
- Compact body, classic design, attractive and durable
- Easy to carry, hang on the shoulder or put around the waist
- High-powered, high-fidelity amplifier
- UHF wireless fixed frequency with no interference while in use
- A wireless microphone can be connected to the amplifier up to approximately 100 feet
- Sleep mode feature to save battery life of the wireless microphone
Instructions
-
First, make sure to fully charge the amplifier and the wireless microphone. Use the DC 5V charging port for both amplifier and wireless microphone (micro USB slot).
-
Auto Channel Pairing: Short press this button to automatically connect the assigned channel of the wireless microphone to the amplifier, there will be a beeping sound to confirm the pairing.
When the frequency of the transmitter is changed, the wireless microphone is disconnected from the amplifier. -
Power On/Volume Control Dial: Turn towards the “ON” direction to turn on the unit, turn further to increase the volume, and turn towards the “OFF” direction to decrease the volume. When turning off completely, you will hear a “click”.
-
Red Indicator: When the amplifier is charging, the red indicator light will be on, and it will turn off when fully charged.
-
Green Indicator: When the amplifier is on, the green indicator light will be on.
-
Microphone Volume + Button: A) Short press to increase volume gradually or B) Press and hold to change frequency to the next higher level.
-
Microphone Volume – Button: A) Short press to decrease volume gradually or B) Press and hold to change frequency to the next lower level.
-
Microphone Power Switch: Toggles the wireless microphone to the ON or OFF position.
-
Wired Microphone Jack (optional accessory sold separately): Plug in a wired microphone.
Specifications
Amplifier | Wireless Microphone |
---|---|
Output Power | 5W RMS/1 OW Max. |
Speaker Impedance | 30 |
Frequency Response | 200Hz-20KHz |
Input | 5V-500mA Max. |
Battery | 3.7V/1500mAh |
Battery |
Precautions/Notes
- The wireless microphone is unidirectional. For best results, adjust the wireless microphone tip to approximately less than 1” from your mouth.
- To ensure the life of the lithium battery, do not use this unit while charging, and charge periodically when not in use for long periods of time. Turn off the power to avoid battery loss.
- AII accessories are designed for this unit. Use the original accessories to achieve the best working results.
- Do not disassemble, modify or attempt to repair this unit.
- Do not use it in extremely high temperatures or in high-humidity environments.
- Do not throw or drop to avoid damaging this unit.
- Use a USB power supply with an input voltage of DC 5V.
- Discard of battery properly, following local recycling requirements. Keep away from water and fire.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment. (Example: use only shielded interface
cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
RF Warning Statement:
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposure conditions without restrictions.
Troubleshooting
Power has been turned on, but the amplifier has no sound:
- Confirm both device and microphone are powered on.
- Turn up the volume on both the device and the microphone.
- Make sure the green power indicator light is on.
- Make sure the channel frequency is paired correctly.
The amplifier has no sound when using the wireless microphone:
- Confirm both device and microphone are powered on.
- Confirm both device and microphone are powered on.
Pair again if necessary.
The amplifier has feedback:
- Make sure the microphone is not too close to the amplifier.
- You may need to turn the volume down to avoid feedback.
Warranty:
Warranty begins the date item ships from our warehouse. All products have a
one-year warranty from the original date of shipment unless otherwise noted.
Product Registration Instructions: To register your product please visit:
www.HamiltonBuhl.com
- Click on Customer Care
- Click on the Product Registration Icon
- Fill out all fields marked with * to register
80 Little Falls Road, Fairfield, NJ 07004
Phone: 1-800-631-0868 • Fax:
1-800-398-1812
sales@hamiltonbuhl.com
www.HamiltonBuhl.com