XIIW B0B71LL8H7 Pyrography Station Temperature Adjustable Instruction Manual
- June 15, 2024
- XIIW
Table of Contents
XIIW B0B71LL8H7 Pyrography Station Temperature Adjustable
- Temperature range: 2so·c~Goo·c /482°F~lll2°F
- Main unit dimensions: L115W70H84mm ±Smm
- Operating ambient temperature: 0c~40°c / 32°F~l04°F
Thank you for purchasing this product. Please read the manual carefully before
parting and keep this manual for future reference.
Statement: The company reserves the right to improve & upgrade products,
product specifications and design are subject to change without notice.
Made in China
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of their life must be collected & returned to an authorized recycling facility.
APPLICATIONS
This station is suitable for pyrography works on wood, gourds, leather, wheat stalks, tree barks, bamboos, furniture, and more.
PART LIST
- Dial (Temperature Adjustment)
- Cord (Pyrography Pen)
- Pyrography Pen
- Operating Indicator Light
- Stand (Pyrography Pen)
- PyrographyWire Nib
OPERATION
-
Tip Installation
Align the two pins with the corresponding holes on the pyrography pen. Insert and press the pyrography nib into the pyrography pen. -
Tip Removal
Clamp the pyrography tip and pull it out.
CAUTION: The replacement of the tip MUST be carried out when the tip is cooled. Ensure the
-
Based on your preference, install the pen stand on either the left or on the right side of the main unit. Then, place the pyrography pen in the stand.
-
Turn ON the power switch, and the pyrography nib will begin heating, and the operating indicator light will turn ON. Set the desired temperature and begin your work once the temperature reaches the set temperature.
-
Once done using, place the pen back to the pen stand, then turn OFF the power switch.
If the station is not in use for an extended period, disconnect the power plug.
Note: rotate the pyrography pen handle while picking up the pyrography pen; make sure the pyrography pen handle is appropriately placed onto the U-shaped pyrography pen stand when placing the pyrography pen.
THE USE OF PYROGRAPHY WIRE NIBS
MAINTENANCE AND PRECAUTIONS
After use, clean the residue and oxide off the pyrography pen tip when the tip is cooled. Keep the pyrography pen clean.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>