VID HD90 Endo Ultra Surgery User Manual

HD90 Endo Ultra Surgery
User Manual

Box Contents

a. Power Adapter
b. Remote Control
c.Capture Box
d. User Manual
e. USB-C 2.0 cable
f. HDMI Cable
g. MMI Cable
j. FOOT Pedal
k.Pedal connect cable

Product Diagram

1. POWER ON/OFF

2. DC12V

3. TO PC (UVC only for windows OBS)

4. HDMI OUT(1080p60)

5. SDI IN (3G SDI MAX:1080p60)

6. S-VIDEO IN

7. DVI IN (18+1 MAX:1080p and Single Channel)

8. HDMI IN(MAX:4k30)

9. MMI IN(AV/VGA/YPBPR)

10. Foot Pedal (connect pedal cable:Red is Recorder/White is snapshot photo)

11. IN (connect TRS Audio input)

12. MIC(connect TRS MIC input)

13. OUT(connect TRS Audio output)

14. Strorage USB(USB Drive 512G and Hard Disk 8T/support:FAT32/NTFS/MBR/EXfat etc.)

15. SD CARD(save files in SD card/support 512G and FAT32/NTFS/MBR/EXfat etc.)

Indicator Diagram

Storage indicator
USB Indicator

SD Indicator

PC Indicator

1. Source: AV/SV/YPBPR/VGA/HDMI/DVI/SDI
2. Display:Show the INFO on the screen
3. POWER:Press for 3sec to turn off or turn on
4. Playback: Playback video or photo files
5. Delete files
6. Snopshot image
7. Main menu setting
8. Back
9. Recorder or stop Video

Remote Diagram

| : Recorder and Stop
---|---
| : Capture an image.
| : Select HDMI as the input signal.
| : Select VGA as the input signal.
| : Select YPbPr as the input signal.
| : Select AV or S-Video as the input signal
| :DVI Input
| :SDI Input
| : Mute
| : Microphone mute.
| : Show some infomation on the screen
| : Select the scale to display
| : OK button.
| : Adjust the volume of the source video.
| : Adjust the volume of MIC input.
| : Show the main menu.
| : Back to the previous interface.
| : Set the system time by year, month, day, hour, minute and second.
| : Play back the contents in the USB storage device.
| : Set the Start Time and Stop Time manually during which videos will be recorded automatically.
| : Back to the previous page.
| : Play or stop playing.
| : Go to the next page.
| : Fast backward
| : Delete the recorded video.
| : Fast forward
| : Set the output resolution to 720p.
| : Set the output resolution to 1080p.
| : Select the output resolution for PC, including 1024768, 1280800 and 1360*768.

OSD MENU HOW TO NAVIGATE DEVICE MENU

Settings Menu

button to display settings menu.
There are four categories of settings:

1. System Settings
2. Image Settings
3. Audio Settings
4. Schedule Settings

Press the right and left arrows to choose a setting category.

System Settings

• Show time
  – On: System time shows on the screen.
  – Off: System time doesn’t show on the screen.

• Record Resolution
  – 19201080
  – 12801024
  – 1280*720

• Bitrate
  – Bitrate set to Low: about 4Mbps
  – Bitrate set to Mid: about 10Mbps
  – Bitrate set to High: about 18Mbps
  The bitrate can be set, the compression bitrate is related to the video compression format and resolution.

• File size
  – 16GB: Single file max size up to 16GB or 5 hours
  – 4GB: Single file max size up to 4GB or 5 hours
  TIP: Using FAT32 USB storage devices, the single recorded file will be 4GB at most due to the limitation of FAT32 format. Please use a
  NFTS/exFAT USB storage device, the file will be 16GB at most.

• Looprecording
  – On: Enable loop recording. Under this setting, when the USB storage device is full, it will keep
  recording and previous files will be overwritten.
  – Off: Disable loop recording. Under this setting, when the USB storage device is full, it will stop recording automatically.

• Show REC
  – On: It will always display ”REC” during recording.
  – Off: ”REC” only shows up at the beginning of recording, and will disappear in a few seconds.

• Time Watermark
  – On: It will display time watermark during recording.
  – Off: No time watermark displayed on screen. HDMI OUT
  – Bypass: (only shows what is input signal
  No setting info on the TV)
  Screen and the monitor display at the same time.
  – Local: Screen will not display
  All setting infor is displayed on the monitor.

• System time
  – Set up system time with format ”yyyy-mm-dd hhmm”.

Image Settings

• Brightness Adjust the brightness.
• Contrast Adjust the contrast.
• Saturation Adjust the saturation.
• Backlight Adjust the backlight.
• Autostop off/30min/60min/90min/120min/150min/180min/usersetting
• Decoder update Update decoder.
• Encoder update Update encoder.
• Restore Restore default settings.
• Language Set the language of OSD.
• Version Display the version of firmware.

Audio Settings

• HDMI Volume: Set the volume of HDMI.
• Mic Volume: Set the volume of Mic.
• Line in Volume: Set the volume of Line in.
• Speaker Volume: Set the volume of speaker.
• Line out Volume: Set the volume of Line out.
• Line out mixed:
  – On: Line out outputs the audios of HDMI, Mic and Line in together.
  – Off: Line out only outputs the audio of HDMI.

Schedule Settings

• Schedule Recording
  – On: Enable schedule recording.
  – Off: Disable schedule recording.

• Schedule mode
  – Once
  – Every Day

• Time ranges
  – Max task number is up to 5

SUPPORTED RESOLUTION

Input| Max up to 3840×2160@30fps
1920×1080 (50p), 1920×1080 (60p), 1920×1080 (24p), 1920×1080 (25p), 1920×1080 (30p), 1920×1080 (50i), 1920×1080 (60i), 1360×768 (60p), 1280×1024 (60p), 1280×720 (60p), 1280×768 (60p), 1280×800 (60p), 1024×768 (60p), 720×480 (60i), 720×480 (50i), 640×480 (60p), 720×480 (60p), 720×576 (50p)
---|---
Output| 1920×1080@60fps
Recording| 1920×1080 (60p),1280×720(60p), 1024×768(60p), 1280×1024(60p)

PRODUCT SPECIFICATIONS

External Hard drive

References

• Download | OBS
• ClonerAlliance - Knowledge base and Documents
• My TV/LCD has an “Oops! Something went wrong” message when using ClonerAlliance ViewPro
• MP4-Cloner

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>