OUTDOOR TECH Orcas Active Wireless Earbuds User Guide

June 17, 2024
OUTDOOR TECH

OUTDOOR TECH Orcas Active Wireless Earbuds

OUTDOOR TECH Orcas Active Wireless Earbuds

Hi.

Good call on picking up the Outdoor Tech® Orcas wireless earbuds. Your experience of the universe will soon be enhanced wirelessly. This manual exists to help make sure that you use them correctly, so you’re definitely going to want to relax for a hot second and look through this.

Kisses,

WHAT’S INSIDE

What’s Inside

  • ORCAS Earbuds

  • Three Sizes of Fins and COMPLYTM Eartips
    What’s Inside

  • ORCAS wire clip (already attached)

  • Micro USB charging cable

  • Instruction manual

  • Two ODT stickers

ANATOMY

Anatomy

 LED indicator
 Charging jack
 Microphone (on reverse)
 Volume/Track control
 Multi-function button

Anatomy

Function Action Voice Prompt
Power On / Off

Hold the MFB

| “Power on” / “Power off”
Play/Pause/Answer/ Hang up|

Press the MFB

| N/A
Raise volume|

Press up

| N/A
Lower volume|

Press down

| N/A
Skip forward|

Hold up

| N/A
Skip back|

Hold down

| N/A
Voice command/Siri|

Short press the MFB & up

| “Voice dial”

POWER UP

Power Up

For best results, fully charge your Orcas before use.
For a full charge, plug the Orcas into your wall charger or computer via micro USB cable.
The LED indicator located below the right ear piece will flash red to indicate a low battery.
NOTE: It takes 2 hours to give your Orcas a full charge.

PAIRING

Pairing

Entering Pairing Mode

  1. Hold the “multifunction button ( )” down until the LED flashes red and blue alternately.
  2. Release “button,” you are now in pairing mode.

Pair

Go to your device’s Bluetooth settings ADD or SEARCH devices.
When “ODT ORCAS” appears, select it.
*If asked for a pass code: Enter “0000”

After successfully connecting, the blue LED will flash twice every 4 seconds. The voice prompt will state “Connected.”

You should now be able to play music & make/receive calls using the headset. Hooray.

TALK

Talk

The following are tips on how to use your Orcas to talk on the phone. Just a heads up… the voice prompt is British, which is kinda funny. And just so you’re not surprised, she always states the phone number of the incoming call. Have fun.

TALK (HOW TO)

Function Action Voice Prompt
Answer Press the MFB
“Answer”
End a call Press the MFB
“Call terminated”
Decline a call Press & hold the MFB
“Reject”
Make a call Use your phone to dial as usual or use Siri to dial N/A
Mute/Cancel mute Press & hold up
“Mute on”/ ”Mute off”
Transfer conversa- tion to mobile phone or headset during a call Hold the MFB
“Transfer audio”
Volume up during a call Short press up
N/A
Volume down during a call Short press down
N/A
Voice dial Short press the MFB
N/A
Put call on hold Double press the MFB
Beep
Redial last number Double click the MFB button
“Last number redialed”

You’re popular. What happens when you’re on a call with your girlfriend and your mom calls?

Talk

Answer new call & end current call:| Short press the multifunction button

---|---
Answer new call & retain current call:| Double click the multifunction Button

Switch calls:| Double click the multifunction Button

End current call & switch retained call:| Short press the multifunction Button

FEATURES: ORCA FINS & LIQUIPEL

Features: Orca Fins & Liquipel

THE ORCA “FINS” PROVIDE A SUPER LEGIT FIT.
AND WE HAVE FIT OPTIONS FOR EVERYONE.

Features: Orca Fins & Liquipel

LIQUIPEL

Features: Orca Fins & Liquipel
ARE YOU A SWEATY ANIMAL? NO WORRIES. ORCAS ARE COATED WITH THAT MEANS SWEATPROOF BABY.

FEATURES: COMPLYTM & EARBUDS

 SO, JUST WHEN YOU THOUGHT THE ORCAS COULDN’T GET ANY BETTER…

We totally get that it’s really annoying when your earbuds pop out of your ears when you workout.
Have no fear! We have solved this issue for you by using earbuds designed by COMPLYTM! These earbuds stay perfectly snug in your ear no matter what activity you are doing to get your sweat on.

HOW TO INSERT YOUR COMPLYTM EARBUD

  1. Roll the tip into a thin, round cylinder.

  2. Pull back and up on your ear to open the canal. Gently insert the entire earbud into you ear.

  3. Hold the tip in place until the COMPLYTM earbud expands in your ear canal. * That is some scientific stuff right there.

CHANGING YOUR COMPLYTM EARBUD

Pinch the old tip and twist off.
Clean earphone nozzle of any debris. Secure the new earbud onto the clean nozzle.

Replace every 3 months.. stay hygienic people.

FEATURES: ORCAS CLIP

So, just in case you have extra slack on your Orcas wire that annoys you while you’re running, we’ve added a clip that you can shorten your Orcas!

Features: Orcas Clip
Features: Orcas Clip

The Orcas wire is already fed through one of the closed openings on the clip. If you choose to shorten the slack on your Orcas to prevent the wire from jostling around, just take more of the wire and feed it through the other opening. (make it look like the above image!)

SPECS

Specs

Battery Life : Continuous talk/music time 6 hours, Standby time/150 hours

Battery life varies subject to different playing circumstances such as music type and volume.

Bluetooth Version: V4.0
Bluetooth Profiles: A2DP, aptX, AVRCP
Operating   distance: 32 feet
Dimensions: 37 x 16 x 28 mm
Weight: 13g

FAQ

  1. Why is the LED flashing red instead of blue?
    The battery is low. Recharge it.

  2. Why is the red LED off when charging?
    A. Make sure the connection between the charging cable and the Orcas is tight.
    B. If the Orcas haven’t been used in awhile, the light may not come on immediately. Charge the battery for at least 30 minutes.

  3. Why cant I pair my Orcas?
    Your Bluetooth device and the chips must both be in pairing mode.

  4. Why can’t I hear the sound on the headset?
    A. Make sure the Orcas are on.
    B. Make sure the volume is not too low or muted.
    C. Make sure the Orcas are properly connected with your device.
    D. Make sure the Orcas are within range of your device.

  5. Why can’t I hear the sound clearly on the headset?
    A. Move your orcas closer to your device.
    B. Make sure your Orcas are charged up.
    C. Turn off your Orcas and device, then power up and reconnect.

  6. Why the pause/play, last/next song not function when playing music?
    Make sure your Bluetooth device supports AVRCP (Audio/Video Remote Control profile)

CARE & MAINTENANCE

CARE & MAINTENANCE

  • Keep the Orcas Dry
  • Keep the Orcas away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
  • Do not try to disassemble the Orcas.
  • Do not let the Orcas fall onto the floor or other hard surfaces. The internal circuit board may get damaged.
  • Do not use intensive chemical products or detergent to clean the product.
  • Do not scratch the surface with sharp things.

K, bye.

Customer Support

DON’T BE SO ANTISOCIAL

Social Media Icon

Facebook.com/outdoortech
Twitter & Instagram: @outdoortech
Questions, comments, complaints, secret desires,
or just to say what’s up : email info@outdoortech.com K bye.

outdoortech.com

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

OUTDOOR TECH User Manuals

Related Manuals