Pyle PUCWM11 Single Tub Washing Machine Instructions Manual
- June 15, 2024
- Pyle
Table of Contents
Pyle PUCWM11 Single Tub Washing Machine
Dear Customer:
We would like to take this opportunity to thank you for purchasing this mini single-tub washing machine. This item utilizes modern industrial design principles for customer satisfaction. Please take some time to read the Instruction Manual before attempting to use your new single-tub washing machine.
PARTS IDENTIFICATION
ACCESSORIES
- WATER INLET HOSE
- INSTRUCTION MANUAL
INSTALLATION
- Place the unit on a leveled floor and in a well-ventilated place.
- Do not install on weak or rough flooring.
- Make sure to connect the green earth wire located at the back of the unit to any grounded object. Do not connect the grounding wire on a water pipe or gas pipe.
- Lay down the drain hose.
- Use the water inlet hose provided to connect to a faucet/tap (water supply) into the washtub water supply inlet.
- Adjust the level of water according to the clothes type and quantity.
- Set the wash timer to the desired setting and turn on the washing machine.
WASHING PROCEDURE
Washing:
- Set the wash selector to Gentle or Normal. Please see Table 1 for wash mode.
- Insert the water hose into the Inlet or prepare a pall of water (If no water Is available from the faucet) to fill the washtub halfway.
- Put the detergent depending on the water volume and detergent package indication.
- Set the Wash Timer knob to 1 minute to dissolve the detergent.
- Put clothes one by one in the washtub and push it towards the bottom. Continue adding water up to the desired level.
- Set the Wash Timer to the appropriate setting. Refer to Table 1.
Rinsing:
- Rinse clothes by following the washing procedure. But this time, do not put a detergent.
Washing Suggestions:
- When washing heavily soiled cotton or linen clothes, wash them first in clean water for 2-3 minutes then drain the dirty water. Proceed with the usual washing procedure. This process will improve the washing effect and reduce detergent consumption.
- Add a small amount of detergent on cuffs, collars, and other seriously soiled places and rub them by hand or with a laundry brush.
MAINTENANCE AFTER USE
- Pull out the power cord and hang it on the hook on the side of the washing machine.
- Thoroughly drain out the water from the wash tub.
- Turn the Wash Selector to the Normal position.
- Clean the washing machine and hang the drain hose to the hook on the side of the machine. 3. Use low-foaming/high-density laundry powder or liquid detergent for more effective washing.
- The use of warm (not hot or boiling) may improve the washing effect.
- Remove the water supply inlet hose remove the water from it and place the hose inside the wash tub.
- Let the machine air dry in a ventilated place before putting back the Lid Cover.
- When the washing machine has been used for some time, some fabric naps may accumulate underneath the pulsator. If this piles up, it may affect the normal running of the roll stick. To check and clean this, take out the pulsator by unscrewing it carefully. Clean the pulsator by subjecting it to running water and brushing it lightly. Do not use a steel brush. Clean the base of the wash tub for any fabric naps. Return the pulsator to its proper position. It is suggested that you clean it once a month.
TABLE 1. WASH MODE AND WASH/RINSE TIME
LEVEL OF | SILK WOOL | COTTON, HANG | COTTON & HEMP |
---|---|---|---|
Soiled Mode | Chemical Light Soiled | Cotton, Linen, |
Normal
| Seriously Soiled
Wash Time (Minutes)| 2-5 Minutes| 5-10 Minutes| 10-15 Minutes
Notice:
- The power cord of this machine is specially installed. If damaged, unplug it. Do not attempt to open the wire connect box by yourself. Call for a service technician to fix it.
- If there is abnormal noise and vibration, please stop the machine immediately. Call for a service technician to fix it.
- Always turn the Wash Timer gently to its proper direction (clockwise).
- Do not pour boiling water or water 60○C and above. This will deform polyester and other plastic parts.
- Keep the washing area from any obstructions, especially during washing operations.
- Do not go beyond washing-rated capacity.
- Do not put any heavy objects on the washing machine.
- Do not use/put any strong acid, alkaline, or other organic compounds.
MAINTENANCE AFTER USE
PROBLEM | POSSIBLE CAUSE | REPAIR |
---|---|---|
PULSATOR | Power Failure (Blackout) | Insert Plug |
STOP | The plug is loosely connected | Call the service technician to put back |
the V-Belt
RUNNING| V-Belt drops off| Call the service technician to tighten the pulley
screw
| Loose pulley| Remove foreign objects immediately
| Jammed pulsator due to foreign matter| Call the service technician to
adjust the gap between them
ABNORMAL| Friction between pulsator and washtub| Remove foreign objects
immediately
NOISE| The pulsator is jammed due to foreign matter| Call the service
technician to put back the V-Belt
VIBRATION| V-Belt too tight| Call the service technician to put back the
V-Belt
PULSATOR| Slackened of worn-out V-Belt| Replace V-Belt
RUNS AT ABNORMAL| | Call the service technician to tighten the V-Belt and
screws
SPEED| Loose motor fixing screws| Call a service technician to fix the machine
CIRCUIT DIAGRAM
WARNING!
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
FREQUENTLY ASKED QUESTIONS
What is the brand and model of the portable washing machine described in the details?
The portable washing machine is the Pyle PUCWM11.
What is the item weight and dimensions of the Pyle PUCWM11 Single Tub Washing Machine?
The item weight is 10.84 pounds, and the dimensions are 19.7 x 14.1 x 13.8 inches.
What is the capacity of the Pyle PUCWM11 Single Tub Washing Machine?
The washing machine has a capacity of 4.5 cubic feet.
What is the annual energy consumption of the Pyle PUCWM11 Single Tub Washing Machine?
The annual energy consumption is 180 Watts.
What is the maximum spin speed of the Pyle PUCWM11 Single Tub Washing Machine?
The maximum spin speed is 6 RPM.
What is the noise level mentioned for the Pyle PUCWM11 Single Tub Washing Machine?
The noise level is 57 dB.
What type of installation does the Pyle PUCWM11 Single Tub Washing Machine require?
The installation type is freestanding.
What is the form factor of the Pyle PUCWM11 Single Tub Washing Machine?
The form factor is stand-alone.
What special features are mentioned for the Pyle PUCWM11 Single Tub Washing Machine?
Special features include portability.
What is the color of the Pyle PUCWM11 Single Tub Washing Machine?
The color is white.
What type of control console does the Pyle PUCWM11 Single Tub Washing Machine have?
The control console is a knob.
Where is the access location for the Pyle PUCWM11 Single Tub Washing Machine?
The access location is top load.
What is the voltage requirement for the Pyle PUCWM11 Single Tub Washing Machine?
The voltage requirement is 120 Volts.
What fuel type is mentioned for the Pyle PUCWM11 Single Tub Washing Machine?
The fuel type is electric.
Is the Pyle PUCWM11 Single Tub Washing Machine compatible with custom panels?
Yes, it is compatible with custom panels.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:Pyle PUCWM11 Single Tub Washing Machine Instructions Manual