ECOXGEAR EcoBoulder Waterproof Outdoor Speaker User Guide
- June 15, 2024
- Ecoxgear
Table of Contents
Eco Boulder Waterproof Outdoor Speaker
User Guide
Eco Boulder Waterproof Outdoor Speaker
Eco Boulder+
Waterproof Outdoor Speaker
IMPORTANT SAFETY INFORMATION
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of non-insulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions in
the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions – All the safety and operating instructions should be read before this product is operated.
- Keep these instructions – The safety and operating instructions should be retained for future reference.
- Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
- Follow all instructions – All operating and use instructions should be followed.
- This apparatus can be used in outdoor conditions after disconnected the AC Mains supply and closing the waterproof cap for the AC inlet. It must not be used in outdoor conditions when charging. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like’
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.- Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- The battery (battery or batteries of battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Keep a minimum distance of 5cm around all edges of the display for sufficient ventilation.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- Operating Environment: temperature: 5 degree-35 degree, Humidity: 10% to 90% non-condensing, altitude: 0-2000m. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not remove battery incorporated with product for your safety. If you need to replace the battery, take it to the nearest authorized Eco Boulder+ service point or dealer for assistance.
Safety way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the environment and bring on
possible threat to human and animal health, the old battery or the battery put
it in the appropriate container at designated collection points. Do not
dispose of batteries or battery together with other waste. It is recommended
that you use local, free reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat such as sunshine, fire or
the like. Do not remove battery incorporated with product for your safety. If
you need to replace the battery, take it to the nearest authorized Eco
Boulder+ service point or dealer for assistance.
Correct Disposal of this product. This marking indicates that this product
should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling. WEEE directive
Rating Label
The product rating label is located behind the retractable handle.
Eco Boulder Layout
FRONT
BACK
Connect+ Power
In/Out Connections
Do NOT use these connections if they are wet.
Microphone Input: You can input a microphone, guitar, or other musical
instrument. Port is ¼” (6.35 mm).
Auxiliary Input: This input can be used to connect a CD player, Mp3
player, etc.
USB Charging Port : Connect your device’s charge cable here to charge it.
USB charging only functions when the Eco Boulder’s power is turned on. USB
port rating is 5V, 2.1A.
Power
Do NOT plug unit into wall power outlet if power cable jack is wet.
Use Caution: 120VAC Power Input. Contact may cause electric shock and
injury if wet.
Insert the included power cable to charge the Eco Boulder+.
Note: The Eco Boulder+ can be played while battery charges.
The icon will be on when plugged into AC power. When the power cable is
connected, blinking of the battery segments shows the battery is charging.
When fully charged, all battery segments will be lit without blinking. It can
take 4 to 8 hours to fully recharge the battery from empty.
Notes:
- Fully charge prior to first use (4-8 hours).
- Fully charge prior to extended storage (4-8 hours).
- Contact Grace Digital at www.gracesupport.com prior to attempting to replace battery.
LEFT SIDE
Important: Maintaining Waterproofness
If the caps on the left side panel are not properly closed, the unit is
NOT watertight.
Waterproof Caps
To close properly, turn the cap clockwise so the cap’s arrow point lines up
with the locked symbol . To access the connections, turn the cap
counterclockwise so the cap’s arrow point lines up with the unlocked symbol .
then pull the tab on the cap to open.
Notes:
The storage pocket on the right side panel is NOT waterproof.
The storage pocket is attached to your Eco Boulder+ with velcro, so you can
remove it and take it with you. 
Display + Controls
- Power Button: Turns Eco Boulder+ on or off.
- Bluetooth Button: When in Bluetooth mode, if the Bluetooth icon is not flashing on the LED screen, press this button to enter pairing mode. If your device is paired (solid icon on LED screen), press button to disconnect. Press and hold this button for 5 seconds to clear all pairing records.
- Source Button: Press this button to cycle through the following modes: Bluetooth, FM, AM, and AUX.
- Play/Pause: Press to play or pause a track from a paired Bluetooth device.
- Track Buttons: Press these buttons to go to the previous/next track on a paired Bluetooth device.
- Microphone Volume Control: Press to adjust the microphone volume. Press and hold to adjust the volume continually (volume levels are Oto 30).
- Eco Connect Button: If you have purchased a second Eco Boulder+ (or one other ECOXGEAR speaker bearing the Eco Connect symbol), press and release this button on both speakers to link them together and play in stereo.
- Master Volume Control: Press to adjust the speaker’s main mix volume. Press and hold to adjust the volume continually (volume levels are Oto 30).
- Backlight Button: Press to turn button backlights on/ off.
- Tune Buttons: Press these buttons to tune in a radio station. To “seek” (jump to the next available station), press and hold either button down for a few seconds until it starts to seek a station.
- Eco Talk: This button activates your Voice Assistant (Siri and OK Google).
- AM/FM Presets and Equalization: Store up to 5 of your favorite AM/FM radio stations and quickly tune to a preset radio station. Press the EQ button to activate the Bass and Treble controls. PRESS AND HOLD the EQ button for 3 seconds to activate the Preset EQ modes.
- LED Screen Icons:
| Indicates the battery level of the Eco Boulder+.
---|---
| When the battery level is less than 20%, the first bar will blink.
| Indicates that the battery level is very low.
BT| The Eco Boulder+ is in the Bluetooth mode.
FM| The Eco Boulder+ is in FM mode.
AM| The Eco Boulder+ is in AM mode.
AUX 1| The Eco Boulder+ is in AUX mode.
| Indicates the Eco Boulder+ is charging.
| Two speakers are paired via Eco Connect.
| In pairing mode, the icon will flash. If the connection is successful, the icon will be solid.
| Indicates the speaker volume level of Eco Boulder+. (0 to 30)
| Indicates the microphone vol. level of Eco Boulder+. (0 to 30)
| Indicates the current FM station of the Eco Boulder+.
| Indicates the current AM station of the Eco Boulder+.
Operations
Power On/Off
Power On: PRESS AND HOLD for 3 seconds to power on the EcoBoulder+.
“Speaker on, ready to connect” voice prompt will be heard.
Power Off: PRESS AND HOLD for 3 seconds to power off the EcoBoulder+.
Pairing a Bluetooth Device
- Turn on your Bluetooth device.
- Power on EcoBoulder+. “Speaker on, ready to connect” voice prompt will be heard. If already powered on and not in Bluetooth mode, press SOURCE until it is in Bluetooth mode. (If Bluetooth icon on LED screen is not flashing, briefly press to start pairing your device.)
- Navigate to your Bluetooth device’s setup screen, find ECOXGEAR and connect. If the connection is successful, the Bluetooth icon will be lit solid and your EcoBoulder+ will announce “Connection successful.”
Notes:
- If the pairing is not complete within 5 minutes, the speaker will exit the pairing mode. You need to repeat the pairing steps again.
- After the connection is successful, if you turn the speaker off and turn it on again, it will reconnect to the last connected device automatically. Also, a voice prompt “Speaker on, ready to connect” followed by “Connection successful” will be heard.
- Press and hold for 5 seconds to clear all pairing records.
Adjust the Master Volume
Adjust the Master Volume
- Press briefly to adjust the speaker volume.
- Press and hold to adjust the speaker volume continuously (volume levels are 0 to 30).
a. Press briefly to increase one volume level. Press and hold to keep increasing the volume until maximum volume level is reached.
b. Press briefly to decrease one volume level. Press and hold to keep decreasing the volume until minimum volume level is reached.
Adjust the Microphone Volume
- Press briefly to adjust the microphone volume.
- Press and hold to adjust the microphone volume continuously (volume levels are 0 to 30).
a. Press briefly to increase one volume level. Press and hold to keep increasing the volume until maximum volume level is reached.
b. Press briefly to decrease one volume level. Press and hold to keep decreasing the volume until minimum volume level is reached.
Notes:
- This function only adjusts the external microphone input jack.
- The internal microphone used for Eco Talk (the activation of voice assistants, such as Siri and OK Google, on your device), and phone calls is not independently adjustable from the Master Volume.
- To achieve the maximum microphone volume, the EcoBoulder+ Master Volume and Microphone Volume must be turned to maximum.
Source Button
Press SOURCE briefly to cycle through the following modes:
BT (Bluetooth), FM, AM, AUX l.
Play Music (Bluetooth Mode)
After the EcoBoulder+ is connected to your Bluetooth device, press
briefly on the EcoBoulder+ to play, press again to pause.
Press briefly to play previous song. Press brief to get the next song.
Press to adjust the volume.
Notes:
- Pair and connect your Bluetooth device with EcoBoulder+ before using this feature.
- If a call is received when you are listening to music, the music will pause automatically.
- You can also control Volume and Play/ Pause music operations from your Bluetooth enabled device.
Listening (AM/FM Mode)
Press SOURCE briefly to switch to FM or AM. Press to tune in a radio station.
To “seek” (jump to the next available station), press and hold either button
down for a few seconds until it starts to seek a station.
Press to adjust the volume.
Eco Talk
Press the Eco Talk button to activate the voice assistant on your device
(Siri, OK Google, etc.). Once activated, the speakerphone mic on your
EcoBoulder+ will hear your voice commands and transfer them to the voice
assistant on your device.
Notes:
- Before using the Eco lack function, your device must be connected to the EcoBoulder+ via Bluetooth.
- Not all devices have voice assistant functionality; refer to your device for details.
AM/FM Presets Store a favorite radio station to quickly tune to a preset
radio station. There are 5 positions for AM station and 5 positions for FM
stations. While listening to a station you want to store, press and hold a
preset button (P1-P5) to assign the current station to that preset number.
The LED screen will flash 2 times to indicate it has been set.
If you want to listen to a stored preset, press a preset button (P1-P5) to go
to the stored radio station.
Equalization
We programmed the EcoBoulder+ with a default audio setting that we feel is the
best combination of max volume, strong bass, crisp treble, and minimized
distortion; however, we also built in an equalizer that allows you to adjust
the audio output to suit your preferences.
You can use the Equalization button to adjust the Bass and Treble to your
liking. Press the EQ button once to activate the Bass controls and once more
to activate the Treble controls. Use the Tune buttons to decrease/increase the
Bass and Treble. Both the Bass and Treble levels range from -4 to 4.
PRESS AND HOLD the EQ button for 3 seconds to activate the Preset EQ
modes. Use the Tune buttons to cycle through the five modes: Normal, Jazz,
Rock, Classical, and Pop.
After six seconds of inactivity, the EcoBoulder+ will automatically exit the
EQ Input screen; the EQ button must be pressed again to change modes.
Notes:
- The EcoBoulder+ will automatically save your EQ settings even after powering the speaker off.
- To revert back to the factory default audio settings, press and hold both and for 5 seconds.
LED Screen: Base and Treble Icons
Minimum Treble level of -4.
Maximum Treble level of 4.
Minimum Bass level of -4.
Maximum Bass level of 4.
LED Screen: Preset EQ Modes
Normal: the default setting for best overall performance.
Rock: increases volume level; may cause distortion on some songs.
Pop: increases both midrange and high frequencies.
Jazz: mainly increases the high frequencies.
Classical: increases bass performance.
Eco Connect – Wireless Stereo Connection of Two Speakers
When you have two EcoBoulder+ speakers and want to wirelessly pair them for
stereo sound, first follow the Pairing a Bluetooth Device instructions to
connect one EcoBoulder+ speaker to your Bluetooth device. Leave this
EcoBoulder+ speaker powered on and connected to your device.
Next, place the two EcoBoulder+ speakers next to each other and turn on your
second EcoBoulder+ speaker. Once the second speaker is powered on (the
Bluetooth light will be flashing), press the Eco Connect Button on both of
your Eco Boulder+ speakers. Wait a few seconds for the speakers to wirelessly
connect. Both speakers will announce “Connection Successful,” and the Eco
Connect icon on the LED screen on both units will light up once the connection
is completed.
Once the two EcoBoulder+ speakers are connected via Eco Connect, start playing
music from your device. Both connected EcoBoulder+ units will play the music
from you device.
The Eco Connect default has your speakers playing in stereo mode. If you would
like to change which speaker is left or right or if you want to set each
speaker to play in mono mode you can press and hold Each press and hold of
will change the speaker from RIGHT/ LEFT to LEFT/ RIGHT to MONO. When changing
modes, the left and right speakers will announce, “Stereo mode, left speaker,”
“Right speaker,” respectively. When in mono mode, both speakers will
announce, “Mono mode.”
The Eco Connect connection between the two EcoBoulder+ speakers will NOT
automatically re-connect after the speakers are turned off. To re-establish
Eco Connect between the speakers, after power off, please follow the above
steps.
Notes:
- You can also pair the EcoBoulder+ with any other ECOXGEAR speaker bearing the Eco Connect symbol .
- The Eco Connect functionality is only available while using Bluetooth as your audio source at a maximum range of 30 feet between both of the paired speakers.
- While pairing the two EcoBoulder+ speakers, make sure that the speakers are within a few feet of each other.
Troubleshooting
The sound is distorted
Try lowering the volume control of your connected device or musical
instrument. Also, try to reduce the overall volume of the EcoBoulder+.
Cannot Pair With Bluetooth Device
Make sure that your device is compatible with Bluetooth. Turn off your
EcoBoulder+ and Bluetooth device, then power on and reconnect. Make sure that
Bluetooth mode is selected on your EcoBoulder+.
There is a high-pitched whistling noise when using microphone
This is probably feedback. Point the microphone away from the speaker.
If there is poor AM/FM reception
To adjust AM/FM reception, move entire product.
If you can’t hear the microphone over the music volume
EcoBoulder+ Master Volume must be turned up to increase the Microphone Volume.
Turn up the Master Volume on the EcoBoulder+ and turn down the music volume
directly from your Bluetooth device.
Can NOT play music from a flash drive
The USB ports are only for charging USB devices.
Water draining from bottom of unit
Holes in the base of the EcoBoulder+ speaker are designed to allow excess
water run-off to drain away from the speaker. Water draining from this area is
normal and safe.
Volume level is too low
Increase the volume on the EcoBoulder+ and / or increase the volume on your
Bluetooth device.
Battery not properly charging
Twenty minutes after plugging into an AC power outlet, EcoBoulder+ will check
if the battery is rechargeable. If not, the individual bars on the battery
level indicator on the LED screen will flash from top to bottom. (Normally,
the battery segments will flash from bottom to top.) Please do NOT
attempt to fix your EcoBoulder+ unit. Please contact our Customer Support at
[email protected] or call us at
866.446.0961.
Specifications
Dimensions
Bluetooth Compliance
Bluetooth V 4.1
Bluetooth Frequency Band
2.402-2.48GHz ISM Spectrum
Modulation
GFSK, n/4-DQPSK, 8DPSK
Bluetooth Range
Up to 100ft/ 30m
Tweeter
3″ (76.2mm) tweeter
Passive Woofer
8″(203.2mm) woofer
Woofer
8″(203.2mm) full range woofer
Output Power
100 W (peak)
Power Source
12V, 7.0Ah SLA Battery
Power Supply
Input voltage:
110-230V-50/60Hz
USB Output
SV, 2.lA
Charging Time
Approximately 8 hours| Eco Connect
True Wireless Stereo (TWS)
Eco Connect Range
30 ft /9.1m between
left and right speaker
Compatibility
Mobile phone/device supporting
Bluetooth Vll (and above)
Radio Frequency Range
US: AM 520 – 1710 kHz,
FM 87.5 – 107.9 MHz
Fuse
Glass tube (slow-blow)
0 5.2x20mm; 250V, lA
Storage Temperature
-40″F to 122F/ -40C to 50C
Operating Temperature
23’F to 95F/ -5C to 35C
Waterproof/ Dust Rating
IP67
Play Time
Up to 100 hrs in standby, 50hrs play time, l0hrs play time at max. volume
---|---
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1.) This device may not cause harmful interference, and
2.) This device must accept any interference received, including interference
that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: To maintain compliance with FCC’s RF Exposure guidelines, this
equipment should be installed and operated with minimum distance between 20cm
the radiator to your body: Use only the supplied antenna. FCC ID: 2AAUI-
GDIEXBLD801.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: reorient or relocate the receiving antenna,
increase the separation between the equipment and receiver, connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected, consult the dealer or an experienced radio/TV
technician for help.
RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1.) This device may not cause interference, and
2.) This device must accept any interference, including interference that may
cause undesired operation of the device.
PRODUCT USE AND PROTECTION:
Read and follow all instructions. Use only as intended.
The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and
in land or water environments. The speaker has been tested to IP67
waterproofing standards, which means the speaker can be submerged in up to 3
feet of water for 30 minutes without any damage. However, the speaker is NOT
intended for constant underwater use.
Always make sure the cap(s) / cover(s) are clean, free from sand or debris,
and correctly fitted. The speaker will only meet IP67 ratings if all rubber
seals, gasket(s) and cover(s) / cap(s) are in place. If you notice a muffling
of audio after submersion, gently shake the unit to clear excess water.
If your speaker is exposed to salt water, clean it thoroughly after use with
fresh water.
The power cable and the unit with an improperly fitted cap are NOT waterproof.
To prevent fire or shock, do NOT attempt to charge this unit if it is wet or
you suspect water has entered the unit. In this situation, please return the
unit to Grace Digital for a free assessment. lf we have found that the unit
has carried water, we will repair or replace the unit free of charge.
SAFETY ADVISORY & WARNING:
Read and follow all instructions. Use only as intended.
CAUTION: Do NOT open to repair. A qualified technician must carry out
repair work.
ATTENTION: Do NOT charge while the unit is wet. Towel dry the unit AND
make sure all connections are dry BEFORE plugging in the charging connector.
Failure to do so may result in electrical damage to the unit and may void the
warranty.
WARNING: This product may contain chemicals listed in Proposition 65 (
www.oehha.ca.gov/prop65/prop65_list/Newlist.html)
WARNING: Danger of explosion if battery is incorrectly replaced.
CAUTION: The unit can be used with the main power cord disconnected, the
unit is readily operable with the main power cord disconnected.
ATTENTION: Do NOT dispose of in a landfill. Contact Grace Digital at
www.gracesupport.com or a certified recycling
agent to dispose of the unit.
SAFETY:
This product has a limited life span of use and should be replaced when it
shows obvious signs of wear.
Do not modify or remove any original component parts of the speaker. Doing so
could cause damage to the unit, allowing water to ingress. A unit with water
ingress should not be charged due to potential risk of fire or shock.
Please exercise care and good judgment when using your ECOXGEAR speaker. Audio
levels should be appropriate to your environment, comply with all local
regulations, and always ensure that you can hear and be aware of any potential
hazards around you.
You should always
- Use the ECOXGEAR speaker in accordance with any music or noise rules and regulations.
- Properly seal the ECOXGEAR prior and after each use when in humid or water environments to avoid water damage to the internal components. Salt water/ air is particularly corrosive. Always make sure that the gaskets are sealed when in a salt water environment and that the unit is properly rinsed off after use.
- Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt, or water on them prior to storage.
- Store your unit with all caps properly sealed to avoid long term internal moisture damage inside your unit.
- Completely dry and clean your ECOXGEAR prior to attempting to charge the unit.
- Return the ECOXGEAR to Grace Digital if you suspect water ingress into the unit or if the unit has experienced a severe impact that may have affected the integrity of the unit to take on water
You should never
- Never charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could be potentially hazardous and cause fire or a spark.
- Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface which may have destroyed the integrity of the speaker, housing, or gaskets. In the event of a severe impact to your unit, please return the unit to Grace Digital to review for potential damage.
- Never open the auxiliary doors in a water environment. This could cause water to ingress into the unit which could potentially be hazardous and cause a fire or a spark.
- Never connect a device to the auxiliary input jacks when in a water environment. The auxiliary jacks should only be used in a dry environment.
- Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs.
CARE, MAINTENANCE & PRECAUTIONS:
-
The unit is waterproof only when the caps and door are properly closed.
-
Close the caps and door properly before use.
If the unit is placed in water without the caps or door properly closed, water may enter into the unit and void your warranty. -
Dry unit completely before opening the caps or door. Do NOT open the caps or door if wet or in a wet environment.
-
Do NOT apply excessive force to any surfaces of the unit when wet or in a wet environment.
-
Do NOT use or store the unit in places with high temperature.
-
AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong magnetic fields.
-
Periodically check the rubber seal on the caps and door for premature wear.
-
Periodically clean the rubber with a soft moist cloth and ensure no objects such as dirt, hair, sand are on the rubber seal ring. Do NOT use any oily solvent or chemicals for cleaning.
-
Rinse off the unit with tap water after use in salt water or swimming pool.
-
Power and / or charge the built-in rechargeable battery for portable use by connecting the AC cord to an AC outlet.
-
Noise and audio distortion may occur when the batteries are nearing end of charge.
-
Do NOT remove the built-in battery. Do NOT remove the grill covers.
LIMITED MANUFACTURER’S WARRANTY:
EcoBoulder+ is covered by a 3 year limited warranty that covers defects in
workmanship and/ or materials for a period of 3 years from original purchase
date. This warranty does not apply to any products which have been abused,
neglected, modified or used for a purpose other than the one for which they
were manufactured. Please refer to the above care and maintenance instructions
for suggested care details. The warranty is valid only for the original owner
who purchases the unit from an authorized dealer. Transfers do not qualify
for warranty protection. Grace Digital reserves the right to replace any out-
of-stock or discontinued product with a comparable product. Discontinued
products may not be available for warranty replacement. Any contents are NOT
covered by the limited manufacturer’s warranty. Warranty terms may be revised
without notification at the discretion of the manufacturer. Please visit
www.ecoxgear.com for additional product & warranty
information.
EcoBoulder+ by ECOXGEAR, a division of Grace
Digital Inc., San Diego, California.
Designed in California. Made in China.
Patents Pending.