Woopoint B3 Fitcloudpro Smart Watch Fitness Tracker User Manual

Woopoint B3 Fitcloudpro Smart Watch Fitness Tracker

Product Information

Specifications

• Display: 1.28″ AMOLED HD
• Resolution: 416 x 416 pixels
• Compatibility: Fitcloudpro APP

FCC Statement

• This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Product Usage Instructions

Step 1: Charging

1. Connect the charging cable to the device and plug the other end into a power source.
2. The device will start charging. The battery indicator will show the charging progress.
3. Once fully charged, disconnect the charging cable from the device.

Step 2: Power On/Off

• To power on the device, press and hold the power button until the screen lights up.
• To power off the device, press and hold the power button, and then select “Power Off” on the screen.

Step 3: Pairing with Fitcloudpro APP

1. Download and install the Fitcloudpro APP on your smartphone from the app store.
2. Open the Fitcloudpro APP and create a new account or log in to your existing account.
3. In the APP, go to the device settings and select “Add New  Device”.
4. Follow the on-screen instructions to pair the device with your smartphone via Bluetooth.

Step 4: Using the Device

Once the device is paired with your smartphone, you can start using it to track your fitness activities, receive notifications, and more.
Refer to the Fitcloudpro APP user manual for detailed instructions on how to navigate and use the various features of the device.

Step 5: Maintenance

To keep the device in good condition, follow these maintenance  tips:

• Avoid exposing the device to extreme temperatures or direct sunlight.
• Keep the device clean and dry. Use a soft, damp cloth to wipe the device if needed.
• Avoid using abrasive cleaners or solvents that may damage the device.

Step 6: Troubleshooting

If you encounter any issues with the device, refer to the FAQ  section below or contact our customer support for assistance.

FAQ (Frequently Asked Questions)

• Q: How do I charge the device?
  A: Connect the charging cable to the device and plug it into a power source. The device will start charging.

• Q: How do I power on/off the device?
  A: To power on, press and hold the power button until the screen lights up. To power off, press and hold the power button, then select “Power Off” on the screen.

• Q: How do I pair the device with the Fitcloudpro APP?
  A: Download and install the Fitcloudpro APP on your smartphone. Open the app, create a new account or log in, go to device  settings, and select “Add New Device”. Follow the on-screen instructions to pair via Bluetooth.

• Q: How do I maintain the device?
  A: Avoid extreme temperatures or direct sunlight, keep the  device clean and dry, and avoid using abrasive cleaners or  solvents.

• Q: Where can I get customer support?
  A: For any assistance or troubleshooting, please contact our  customer support team.

Package Contents

How to charge the watch:

• Place the watch on the magnetic charging base, aligning the magnetic points.
• Connect USB to power adapter (adapter not included).
• Plug the power adapter into a power outlet.
• When the watch is charging, the screen will show the charging progress.

How to Power On/Off the Smart Watch

Power On:
Press and hold the top button for a few seconds to power on the watch.

Power Off:

• Press and hold the top button for a few seconds.
• Select ‘Power Off” and confirm to shut down.

Wake Up the Watch:
To conserve battery, the watch screen will automatically turn off when not in use. To turn the screen back on, you can wake  up the watch using the following methods:

• Press any button on either side.
• Enable the wrist detection feature.

How to Use the Smart Watch

You can operate the smartwatch interface by swiping the screen up, down, left, and right, and also by using the top and bottom buttons on the right side to navigate the interface.

Navigation Button

• Press and hold any of the buttons to wake up the screen.
• Top button: 1. Access the main menu. 2. Go back to the previous screen.
• Bottom button: Access the activity list.
  Navigation of the Main Interface
  The main screen displays the watch dial.

From the main interface:

• Swipe right to access the menu.
• Swipe left to access shortcuts.
• Swipe up to view message notifications.
• Swipe down to enter the quick settings menu.

How to Connect the Smart Watch

Before pairing the watch with your smartphone, ensure that your smartphone and the watch are ready by following these steps:

1. On the first use of the watch, it is recommended to charge it for at least 2 hours to ensure a full charge.
2. Ensure that your smartphone is near the watch. Make sure that the Bluetooth function on your smartphone is turned on.
3. Ensure that your smartphone is running Android 5.0 or higher, or iOS 10 or higher, and is connected to mobile data or Wi-Fi.
4. After completing these steps, scan the QR code below to download and install the Fitcloudpro app, or open the app store and search for the Fitcloudpro app to download and install it.

Install the Fitcloudpro app and open the app to create a new account or use an existing account.
When creating an account, please keep the following in mind:
To calculate your steps, walks, and calorie burn rate, accurately fill in your personal information in the app.
After creating the account, go to the “Pair Device” page within the Fitcloudpro app. Click on “Add Device” and choose the correct name and MAC address of the watch. Accept the pairing request.
You can also use the scanning function located in the top right corner of the search page to scan the watch’s QR code and perform automatic pairing.

For Android phones:

• When pairing the Fitcloudpro app, it will display a Bluetooth connection window. Click “Accept,” otherwise, the watch won’t be able to receive call notifications. If you haven’t clicked “Accept,” after the connection, go to the phone’s system settings, access Bluetooth settings, and manually connect the watch via the corresponding audio Bluetooth.
• For iOS phones: After successfully pairing the INFOWEAR  app, you will need to activate Bluetooth in the phone’s system settings. Go to Bluetooth settings and manually connect the watch via the corresponding audio Bluetooth, otherwise, the watch won’t receive call notifications.

Note : You can find the name and MAC address of the watch in the watch’s settings.

How to Remove Bluetooth Connection from the Smart Watch?

• On Android devices, to remove the Bluetooth connection, access the Bluetooth settings on your Android device. Open Bluetooth settings and select the Bluetooth name of your smartwatch. Then, tap on the “Forget” or “Unpair” option.
• On iOS devices, to remove the Bluetooth connection, access the Bluetooth settings on your iPhone. Find the Bluetooth name of your smartwatch and select the “Forget This Device” option.

What functions does this smartwatch have?
Smart watch support: call function, heart rate measurement,  blood oxygen saturation measurement, pressure measurement, breathing training, weather information, sleep information, exercise modes, notifications, remote camera control, music control, alarm reminders, and calculator, among others.

Function

Call Function
You can receive and end calls directly from the watch, as well as save contacts to dial phone numbers directly. When you do not want to make calls through the watch, turn off the bluetooth calling button on the APP.

Exercise Function:
Offers a variety of exercise modes, and more can be added from the INFOWEAR app to the watch. You can check your daily exercise progress based on calories burned, distance travelled, and activity time.

Heart Rate Function:
This smart watch offers continuous 24H/7D heart rate tracking. You can choose the measurement frequency in the app settings. To measure real-time heart rate, go to the “Heart Rate” screen on the watch and wait for about thirty seconds to see the results.
Note : Ensure the watch is properly fitted on your wrist, and your arm is still while measuring.

Blood Oxygen Function:
This smart watch allows you to view maximum and minimum  blood oxygen levels throughout the day. To measure real-time blood oxygen, go to the “Blood Oxygen” screen on the watch and wait for about thirty seconds to see the results.
Note : Ensure the watch is properly fitted on your wrist, and your arm is still while measuring.

Sleep Function:
This smart watch allows you to view your recent sleep records and different stages of the sleep cycle. To measure sleep data, please wear the watch properly on your wrist before sleeping; the device will automatically detect when you enter sleep.

Breathing Function:
This feature can help you adjust your breathing rhythm. You can choose from three speeds (fast, medium, slow) to adjust your breathing time. To access the “Breathing Training” function on the watch, select your time and speed, then click  start.

Always-On Display Function

1. Turn on the watch, swipe up on the watch screen to access the control interface, and tap the watch icon to quickly  activate the AOD clock.
2. Turn on the watch, go to the watch settings — Always-On Display settings — enable digital clock/analog clock.

Note : Enabling the Always-On Display function will result in  faster battery consumption.

Disclaimer:
This product is not an electrocardiogram or a  professional medical device. None of the functions mentioned above should be used as a reference for medical data.

Basic Parameters

Maintenance and Care of the Smart  Watch:

1. Keep the product clean and dry.
2. Use the product correctly.
3. Do not place the device or its accessories in areas with excessively high or low temperatures, as it could result in device malfunctions, fires, or explosions.
4. Avoid strong impacts or vibrations to prevent damage to the device and its accessories, which could lead to failures.
5. Do not disassemble or modify the device or its accessories on your own. If the device experiences issues, please contact customer service.
6. The water resistance of this product is not permanent and may weaken over time. You can wear it for short periods during activities like handwashing or in the rain, but it is not suitable for hot showers, diving, water jumping, or surfing. The watch is not resistant to saltwater, corrosive liquids like acids or alkalis, or chemicals.
7. If you do not use the device for an extended period, make sure to charge it at least once every three months.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>