Woopoint N7 Smart Watch User Manual
- August 30, 2024
- Woopoint
Table of Contents
Woopoint N7 Smart Watch
Product Specifications
- Model: S5
- Origin: Made in China
- Features: Heart Rate & Blood Oxygen Sensor, Air Pressure
- Hole, Microphone, Speaker
- Connectivity: Bluetooth for calling
Product Usage Instructions
Powering On/Off:
To power on the device, press and hold the Power Key. To turn it off, repeat
the same process.
Charging
Connect the charging cable to the Charging Port to recharge the device. Make
sure to use the provided charger or a compatible one.
FAQs
Q: Can I wear the device while swimming?
A: It is recommended to check the water resistance rating of the device before
exposing it to water. Not all devices are suitable for swimming.
Watch Introduction
Full screen touch: slide down to enter the status setting bar, slide up to
view the notice, slide left to enter the main function interface, and slide
right to enter the split screen menu; POWER key: wake up the screen/enter the
function menu/return to the dial.
Charging guide
Before using the watch for the first time, it can be activated by charging. Use the equipped magnetic charger to attach it to the metal contact on the back of the watch. Connect the other end of the charging line to the 5V1A USB charging head or the computer USB interface.
App-Download
- Download and install through Google Play Store.
- Download and install through AppStore.
- Download and install by scanning QR code.
Binding device
Audio setup
Open the watch Bluetooth call function and play mobile media audio function.
Dial setting
Dial switch: press and hold for 2s in the dial interface to switch the dial,
and slide left and right to switch the dial.
Dial push: you can select your favorite dial in the app dial push and download
it to the watch.
Function Introduction
Daily data
Support daily calories, steps, distance data and target records. It supports
recording the total steps in 24 hours and the walking steps in each period.
Support to view the history of steps in the past seven days.
Sleep
Support daily light sleep and deep sleep records. Support to view sleep
history of nearly seven days
Heart rate monitoring
Before heart rate monitoring, first make sure that the watch is correctly worn
on the wrist (the best position is at a finger width above the wrist bone).
Heart rate detection requires that the watch be worn tightly to avoid light
leakage and cannot be effectively detected. Then enter the heart rate
detection. During the detection process, the wrist is required to remain
stationary. When entering the heart rate measurement interface, the bottom
green light lights up to start the measurement. When the measurement is
completed, there will be a vibration reminder. Support measuring current heart
rate data Support 24-hour detection Support heart rate interval keeping
duration record
Sport mode
The watch supports 8 built-in sports modes+100+sports modes pushed by App.
Blood oxygen monitoring
Before blood oxygen monitoring, first make sure that the watch is correctly
worn on the wrist (the best position is at a finger width above the wrist
bone). The blood oxygen detection requires that the watch be worn tightly to
avoid light leakage and unable to detect effectively. Then enter the blood
oxygen detection. During the detection process, the wrist is required to
remain stationary. When entering the blood oxygen measurement interface, the
bottom green light will light up to start measuring for 30-60 seconds, and
there will be a vibration reminder when the measurement is completed, The
measurement is based on PPG technology; Support to measure the current blood
oxygen data Support to view the blood oxygen history data for the last seven
times.
Weather
After the watch is connected to the APP, this weather interface will display
the real-time weather temperature and weather type. Support to view the
weather data of the day.
Music control
After the watch is connected to the APP, you can control the pause and start
of the mobile music player, volume adjustment and song switching; When the
phone plays music, you can use the watch control phone to play/pause, the
previous song, and the next song.
Other functions
Bluetooth calls, common contacts, call records, voice assistant, sports
records, women’s health, blood pressure monitoring, breathing training,
stopwatch, timer, alarm clock, message push, calendar, rest screen display and
other functions.
FAQ
-
Why is there a reminder on QQ, WeChat and other information, but not on the bracelet?
-
Confirm whether the messages can be displayed normally in the mobile notification bar. The device pushes messages by reading the messages in the mobile notification bar;If there is no message in the mobile notification bar, the device cannot receive the push. (You need to find the notification and status bar in the mobile phone settings, and turn on the phone, SMS, etc.).
-
Open the APP and enter the APP device bar – click the message reminder – open the corresponding application switch button to receive message push.
-
The Bluetooth connection between the device and the mobile phone is always maintained.
-
How can the device be unbound from the phone?
Android phone On the “Device” page of the APP, click the “Unbind” button and select OK to unbind. iPhone -
On the “My” – “Device Information” page of APP, click the “Unbind” button;
-
Under “Settings” – “Bluetooth” – “My device” of the iPhone, select the bracelet to be unbound, click the blue “!” sign at the back, and then click “Ignore this device”. Note: If the iPhone does not ignore the device, it will not be able to search the device when it is bound again, and it will still receive a reminder notice when there are reminders such as information and phone calls.
-
Why are Android phones easy to disconnect?
The APP must be running in the background so that Bluetooth will not automatically disconnect, but the Android mobile phone system memory management will force the APP to close. We need to manually turn off the power saving mode of the mobile phone system or add the APP to the green background of system management so that the APP will not be forced to close.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
Bdigital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.