GOLDEGGS C30-M HD Industrial Endoscope User Guide
- June 15, 2024
- GOLDEGGS
Table of Contents
GOLDEGGS C30-M HD Industrial Endoscope
Specifications
- Camera diameter: 8mm
- Camera resolution: 1920*1080
- Viewing angle: 70°
- Focusing range: 20-100mm
- Auxiliary lighting: 8 adjustable brightness LEDs
- Screen type: 4.3-inch color display
- Charge port: Type-C
- Battery: 2000mAh
- Battery life: 3.5 hours
- Battery charging time: 3 hours
- Operating temperature: -14°F~113°F
- Camera temperature: -14°F~176°F
- Shutdown power consumption：30uA
- Line length：1/5/10/20/30m
Product Information
- Model: C30-M
The HD Industrial Endoscope (Model: C30-M) is a high-precision industrial endoscope camera with a 4.3-inch HD color display. It is designed to provide real-time viewing of high-definition images in various industrial applications. The ergonomic design and easy operation make it convenient to use. The endoscope is equipped with a small diameter HD camera that features LED auxiliary lighting. With its high-sensitivity chip, the camera can be used in dark working environments.
Product Usage Instructions
Safety and Maintenance
Battery Instructions:
- Use a 5V 1A household charger that meets safety regulations to charge the equipment.
- Fast charging is not supported.
- This device supports charging while using.
- If the device is not used for a long time, ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.
Function Introduction
- Black and white: Allows you to switch between black and white displays for better visibility in dark environments.
- Rotate: Rotate the picture by 180 degrees, making it easier to adjust the viewing angle for better observation.
- LED adjustment +: Gradually increases the brightness of the LED light from 0-60-80-100%.
- LED adjustment -: Gradually decreases the brightness of the LED light from 100-80-60-0%.
- Zoom out: Allows you to see different details in different places by adjusting the positive-boost-weak cycle adjustment from 2.0-1.5-1.0x gradually decreas ng.
- Zoom in: Increments the image magnification from 1.0-1.5-2.0x.
- Power button: Press and hold for 3 seconds to turn on and off the power of the machine.
- Charging interface: Connects to a computer or mobile phone adapter through a Type-C data cable for fast charging (do not use an adapter above 12V).
- Reset: This can be used to reset the machine back to normal if it freezes or malfunctions.
Charging Guide
To charge the device:
- Connect the device to a Type-C adapter using a 5V 1A charger.
- The red signal light will be on when charging.
- The green light will be on when the product is fully charged.
Accessories Installation Guide
Accessories:
- Hook*1
- Magnet*1
- Mirror*1
- Fixing device*1
Installation diagram:
- Fixing device
- Hook
- Magnet
- Mirror
Specifications
No specifications are provided in the text extract.
PRODUCT DESCRIPTION
C30-M is a high-precision industrial endoscope camera with 4.3 inch HD color display. It adopts ergonomic design, Easy to operate, real-time viewing of high-definition real images.This product is equipped with a small diameter HD camera with LED auxiliary lighting. The camera adopts a high-sensitivity chip, which can be used normally even in a dark working environment.
SAFETY AND MAINTENANCE
- The product is an industrial endoscopy camera and is not intended for medical use or human examination.
- Do not hit the camera violently and do not pull the cable.
- When used in an environment with sharp bumps, please use it carefully to prevent the waterproof protective layer of the probe from being scratched.
- The camera probe is not made of heat-resistant and high-temperature materi als. When checking the automobile engine, please ensure that the tempera ture in the engine drops to the normal emperature.
- When not in use, please ensure that the lens and the main unit are clean anddry, and avoid contact with oil, etc. or other corrosive and dangerous substances.
- This product is not suitable for people with limited physical, sensory ormental abilities.
- Do not allow children to touch and operate this equipment.
BATTERY INSTRUCTIONS
- Please use a（5V 1A） household charger that meets the safety regulations to charge the equipment. Fast charging is not supported.
- This device supports charging while using.
- If the device is not used for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive discharge of the battery.
FUNCTION INTRODUCTION
-
Black and white
Through it, you can switch between black and white for better effects in dark environments. -
To rotate
The picture is rotated 180 degrees, easy to adjust the angle, better observation -
LED adjustment “+”
The brightness of the LED light can be gradually increased from 0-60-80-100% -
LED adjustment “-”
The brightness of the LED light gradually decreases from 100-80-60-0% -
Compared
Different details can be seen in different places by adjusting the positive- boost-weak cycle adjustment -
Zoom out
After the picture is enlarged, it can be adjusted to return to normal 2.0-1.5-1.0x gradually decreasing -
Zoom in
Image magnification 1.0-1.5-2.0x incrementally -
Power button
Press and hold for 3 seconds to turn on and off the power of the machine -
Charging interface
Connect to a computer or mobile phone adapter through a Type-C data cable for fast charging, and be careful not to use an adapter above 12V -
Reset
If the machine freezes or freezes, you can reset it back to normal
Charging Guide
Connect the device to the Type-C adapter for charging(5V 1A). The product does not support fast charging. The red signal light is always on when charging, and the green light is always on when the product is fully charged.
Accessories installation Guide
Accessories
- Hook*1，
- Magnet*1，
- Mirror*1，
- Fixing device*1
Installation diagram
FAQ’s
Lags happened during the photo outputting of the product
Please check whether the product has sufficient power, or restart the device.
Imaging screen is not clear
The best imaging focal length of the product is 2cm-10cm, please calibrate the distance to the object, or clean the front of the camera with a clean alcohol cloth.
Product charging
Please use the 5V-1A charger to charge the device. The product does not support fast charging.
The camera is heat
It is normal for the camera to heat up, especially when the camera LED light is on at the highest brightness. But it does not affect normal use or service life.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>