NEWTRAL MagicH002 Ergonomic Home Office Chair Instructions

: June 15, 2024
: NEWTRAL

NEWTRAL MagicH002 Ergonomic Home Office Chair Instructions

NEWTRAL MagicH002 Ergonomic Home Office Chair
Instructions

Adjustment Instructions

1.1 Seat Back Tilt Adjustment

1.1.1 Tilt

Sitting on the chair, pull out the adjustment mechanism on the right side of the chair then lean back to adjust the angle of the tilt. Use your right hand to push the lever inward to lock the adjustment mechanism. Move your back slightly until you hear the “click” sound, and the angle of tilt is adjusted.

1.1.2 Upright

Use your right hand to pull out the adjustment mechanism again, and then strongly lean your body back on the backrest (This step is very important!). When you hear the “click” sound, the backrest has unlocked successfully, and at this time you can re-adjust the tilt angle or go back to the upright position.

⚠ Please Note: If you do not lean your body back on the backrest with force when unlocking the adjustment mechanism, the backrest will get stuck, and it will not restore to the upright position.

1.2 Seat Depth Adjustment

While sitting in the chair, raise the seat depth adjustment bar up and slide the seat pan forward or back to adjust the depth of the seat. A good ergonomic position is to have at least 3″ (or about a fists distance) between the back of your knee and the edge of the seat.

1.3 Lumbar Support Height Adjustment

NEWTRAL MagicH002 Ergonomic Home Office Chair Instructions - Lumbar Support
Height Adjustment While sitting in the chair, put your hands to the left and right of the seat back lumbar adjustment mechanism in the back of the chair. Push the adjustment mechanism up or down to adjust the position of the lumbar support until it is adjusted to the position that you think is suitable for you.
The adjustment range of the lumbar support height is 6cm/2.36″.

1.4 Seat Height Adjustment

1.4.1 Lift Up

Raise the seat height adjustment bar and lift your bodyweight off the cushion at the same time. The chair will slowly rise and then release the height adjustment lever when the height of the chair is suitable for your body. A good ergonomic position is that your feet should be flat on the floor and your knees in line with your hips.

1.4.2 Lower the Seat

While sitting on the chair, lift the height adjustment lever. The chair will lower down slowly and release the height adjustment lever when the seat height is suitable.

1.5 Armrest Adjustment

1.5.1 Height Adjustment

Raise the button on the outside of the armrest and then lift the armrest upward to adjust the level to a suitable height according to your needs. A good ergonomic position is when your arms are resting on the armrest, your shoulders should remain down and relaxed.

1.5.2 Front and Back Adjustment

Holding the armrest, move it forward and backward to adjust it to the suitable distance to your desktop.

1.5.3 Rotate Adjustment

Holding the armrest, rotate it to left or right to adjust it to the suitable angle for your arms.

1.5.4 Inside and Outside Adjustment

Holding the middle of the armrest and moving the armrest inward or outward to adjust the arms to a suitable position according to your needs.

1.6 Backward Tilt Strength Adjustment

Underneath the chair in the center, there is a round black knob that you can adjust the back tilt strength according to the direction of the knob”+”,”-” symbol. The”+” sign means it will require more leaning force, and the”-” sign means it will require less leaning force.

1.7 Lumbar Support Strength Adjustment

The orange knob on the back of the chair can adjust the support strength of the lumbar support. Please follow the direction of the”+” and”-” symbols, as well as arrows marked on the orange knob. To adjust the lumbar support strength for more support, rotate the knob toward the”+” sign, and for less support, rotate toward the”-” sign.

1.8 Lumbar Support Lock/Unlock Function

On the back of the chair, there is a black knob below the lumbar support. To have the lumbar support in a fixed position, turn the knob to lock. To be able to flex your lower back and have the lumbar support follow your movements, turn the knob to the unlock position.