DS18 G4.6Xi 4x6Inch 2 Way Coaxial Speaker Owner’s Manual
- June 10, 2024
- DS18
Table of Contents
DS18 G4.6Xi 4x6Inch 2 Way Coaxial Speaker
Product Information: G4.6Xi 4X6 2-WAY COAXIAL SPEAKER
The G4.6Xi 4X6 2-WAY COAXIAL SPEAKER is a high-quality speaker designed for use in vehicles. It features a powerful motor and tweeter for clear and robust sound. The speaker measures 6.10 inches or 155mm in length and has a 4-inch or 102mm diameter. The tweeter measures 1.7 inches or 43mm in diameter and 2.18 inches or 55.3mm in length.
Specifications
- MOTOR: Powerful
- TWEETER: Clear and robust
- MEASUREMENTS: Length- 6.10 inches or 155mm, Diameter- 4 inches or 102mm, Tweeter Diameter- 1.7 inches or 43mm, Tweeter Length- 2.18 inches or 55.3mm
Warranty
Please visit our website DS18.com for more information on our warranty policy. We reserve the right to change products and specifications at any time without notice. Images may or may not include optional equipment.
Warning
Cancer and Reproductive Harm.
www.P65Warning.ca.gov
Product Usage Instructions
- Start by reading the owner’s manual carefully to understand the installation process.
- Identify the location where you want to install the speaker.
- Remove the existing speaker from the vehicle, if any.
- Mount the G4.6Xi 4X6 2-WAY COAXIAL SPEAKER in the same location.
- Connect the speaker wires to the vehicle’s audio system.
- Adjust the volume and other settings on your audio system to enjoy clear and robust sound from the G4.6Xi 4X6 2-WAY COAXIAL SPEAKER.
Remember to handle the speaker with care and follow all safety precautions mentioned in the owner’s manual.
We LIKE IT LOUD!
For more information, please visit DS18.com.
4X6″ 2-WAY COAXIAL SPEAKER
INSTALLATION
SPECIFICATIONS
- Nominal Diameter ……………………………………………………….4×6″ / 101x152mm
- Nominal Impedance ………………………………………………………………………4 OHM
- RMS Power Handling. ………………………………………………………………45W
- MAX Power Handling ………………………………………………………………135W
- Sensitivity (1w/1m) ……………………………………………………………………….84dB
- Frequency Response ………………………………………………….45Hz-20KHz
- Recommended HI Pass Crossover …………………………80HZ
- Number of Ways. ……………………………………………………………………………………….2
- Pair or Single ……………………………………………………………………………….Pair / Par
- Grill Included ……………………………………………………………………………………….No
MOTOR
- Voice Coil Diameter. ………………………………………….1″ / 25.5mm
- Voice Coil Former Material ……………………………………………..ASV
- Winding Material ……………………………………………………………………………EISV
- Cone Material ………………………………………………………………………….Paper / Papel
- Surround Material ……………………………………………………Rubber / Goma
- Basket Material ………………………………………………………………….Steel / Acero
- Basket Color ……………………………………………………….Black Matte / Negro mate
- Magnet Material …………………………………………Barium Ferrite / Ferrita de bario
- Magnet Weight ………………………………………………………………………………6.3 oz /180g
TWEETER
- Nominal Diameter ………………………………………………………………….1″ / 25.5mm
- Voice Coil Diameter …………………………………………..0.5″ / 13.25mm
- VC Former Material …………………………………………………….. ASV
- Winding Material. ………………………………………………………………………..EISVM
- Diaphragm Material …………………………………………………………………MYLAR
- Magnet Material …………………………………………………….Neodymium / Neodimio
- Magnet Weight ………………………………………………………………………………………..1.8g
SPECIFICATIONS
THIELE & SMALL PARAMETERS
- Equivalent Volume ………………….Vas…………………………………1.8L / 0.063ft3
- Excursion (one way) ………………………..Xmax………………………………………….2.2mm
- Free Air Resonance. …………….Fs ………………………………………………115Hz
- Mechanical Factor ………………………….Qms…………………………………………………4.3
- Electrical Factor ……………………………….Qes…………………………………………………..2.3
- Total Factor.. …………………………………………Qts……………………………………………………1.5
- Mechanical Mass ……………………………..Mms……………………………………………….9.4g
- Mechanical Compliance ………Cms………………………………………195mm/N
- BL Factor ……………………………………………………BL…………………………………………………….3.1
- Voice Coil Inductance …..Le……………………………………………..151mH
- Cone Area …………………………………………..Sd……………………………………………84.3cm2
- DC Resistance ……………………………………Re…………………………………………….3.7 ohm
- Mechanical Mass w.. ………………..Mmd………………………………………………8.5g
MEASUREMENTS
- Overall Diameter. ……………………………………………………4″x6.1″ / 102x155mm
- Overall Depth ……………………………………………………………………..2.18″ / 55.3mm
- Front Mount Baffle Cutout ……………………3.6″x5.94″ / 93x151mm
- Mounting Depth …………………………………………………………..1.7″ / 43mm
- Motor Diameter. ………………………………………………………………..3″ / 76mm
- Tweeter Protrusion ……………………………………………….0.48″ / 12.3mm
WARRANTY
Please visit our website DS18.com for more information on our warranty
policy.
We reserve the right to change products and specifications at any time without
notice.
Images may or may not included optional equipment.
WARNING:
Cancer and Reproductive Harm.
www.P65Warning.ca.gov
FOR MORE INFORMATION
PLEASE VISIT
DS18.COM