wuyule HYGXHG016G-1 42 Inch Crystal Ceiling Fan Installation Guide

Luxury Fan Lamp
Installation Instructions

HYGXHG016G-1 42 Inch Crystal Ceiling Fan

Fan light Installation Video

| https://www.youtube.com/watch?v=Ze5_r7g_EaE|
---|---|---
| https://youtu.be/WdUjJc5VOKI|
| https://www.youtube.com/watch?v=ZnKH60gEI9M|
| https://www.youtube.com/watch?v=vpo_wCJ-NIE|
| https://www.youtube.com/watch?v=NY7EaoYgiXE|
| https://www.youtube.com/watch?v=C11I7tBiR5A|
| https://www.youtube.com/watch?v=jSELeZSu-Cod|
| https://www.youtube.com/watch?v=d-o8wdku8nU|
| https://www.youtube.com/watch?v=JL1h6VKNhIk|
| https://youtu.be/Iszb9vv7nSQ|
| https://youtu.be/gr2vuO3neb4|
|

https://youtu.be/-Ou9u_5_Too

|
| https://www.youtube.com/watch?v=fH-LIBOTpxE|
| https://youtu.be/fzCe3g8Y9VM|
| https://youtu.be/6Rc4gAp7shA|
| https://www.youtube.com/watch?v=fR1JYjnVAfU|
| https://www.youtube.com/watch?v=W7jPfbvFkZo|
| https://youtu.be/KuBbzcXcoRs|
|

https://www.youtube.com/watch?v=V66kDnn180c

|
| https://www.youtube.com/watch?v=Xs-N_OITWUA|
| https://youtu.be/PnNTk90-02U|
| https://www.youtube.com/watch?v=5kWkIclfbPs|
| https://www.youtube.com/watch?v=_QHUOxaEH_g|
| https://youtu.be/r4WxkBN969M|
| https://www.youtube.com/watch?v=JQH6a909NWE|
| https://youtu.be/kWFoArKGSGs|
| https://youtu.be/YLYvqZpAz-o|
|

https://youtu.be/VqaeCaZniHc

|
| https://youtu.be/WZHLYrSzNyQ|
| https://www.youtube.com/watch?v=76rE3xX43p8|
| https://www.youtube.com/watch?v=UMPh9d0616Q|
| https://youtu.be/56Far6QuHyA|
| https://youtu.be/gP59EqBqoxQ|
| https://www.youtube.com/watch?v=B11jOymehNM|
|

https://www.youtube.com/watch?v=3xckH5vRWOY

|
| https://www.youtube.com/watch?v=LKR1-63cfSQ|
| https://www.youtube.com/watch?v=Uk8xUGn9198|
| https://www.youtube.com/watch?v=ulbV8iinNqg|

Warning

Warning: Do not open electric shock
Anti-shock warning: Do not open the cover or back shell, which is not available
Parts, please consult professional for service.
To avoid electric shock, non professional maintenance personnel are not allowed to remove the cover or back plate without authorization.
Note: If the lamp does not light up after the power is turned on, please confirm whether the installation and wiring of the lamp are correct.

Safety precautions before ceiling fan installation

1. Please turn off the power before installing and disassembling of the ceiling fan.
2. The installation must follow in the order of grounding wire, zero wire and live wire.
3. The disassembly must follow in the order of live wire, zero wire and ground wire to avoid electric shock.

List of Accessories

Tools before installation

Installation of hanger

1. please use 4 self tapping screws to lock the hanger on the ceiling when installing the wooden ceiling, . (The thickness of wooden ceiling shall not be less than 10mm, and the bearing capacity shall not be less than 30kg)
2. For installation on the concrete ceiling, first step is drilling 50mm deep with 8mm impact drill bit, and then fixing the hanger on the ceiling with the expansion screw in the light fitting package.

To ensure reliable fixation, please use the corresponding fixing screws according to the above instructions when installing on ceilings of different materials.
If the installation surface is made of wooden, please ensure that the thickness of the board at the installation location is not less than 10mm and the bearing capacity is not less than 30Kg

Install the suspender, hanging cup and lower decorative cup

※ Select suspender

1. The suspender with appropriate length shall be selected according to the ceiling height. The steps for replacing the suspender are shown in Figure 2 and Figure 3.

Note: In order to prevent damage to human body or other objects caused by the fan blade during work, please ensure that the distance between the end of the fan blade and the ground after installation is not less than 2.3 meters

Hanging

1. Put the lifting ball in from the opening position, and rotate the adjusting rod to make the groove on the lifting ball mesh with the convex groove on the hanger (inside the hanger).

Fixing cup

2. Align the notch of the lifting cup with the screw on the hanger, and then lift the lifting cup up to make the screw pass through the notch of the lifting cup, and then screw it in from right to left, and use a screwdriver to fix the two screws of the lifting cup tightly As shown in step 11.

Connected to power

1. Follow step 9 for wiring.

Please Switch off the power supply before installation to prevent electric shock!

Wiring

Grey wire to grey wire;
Red wire to red wire ;
Pink wire to pink wire
Blue wire to blue wire;
white wire to white wire

Instructions for Remote Control with Pole less Dimming

After the fan is installed, turn on the wall switch and ensure that the remote control handle can be used directly after the battery is installed.
If the lamp or fan cannot be made, the code can be re calibrated.
The method is to disconnect all the power of the lamp with the wall switch, turn on the power again every 5~10 minutes, and then immediately press the signal button . If the lamp flashes, the code can be calibrated successfully, and the lamp can be used.

Installation plan for installing LED, lampshade and crystal

If the product you purchased is similar to model A, you can refer to this step for installation orScan the corresponding product QR code on the manual and watch the installation video for installation

The accessory includes a copper needle for hanging crystal ball. Insert the copper needle through the crystal hole, bend it into a hook shape and hang it as shown in step 3.
If the product you purchased is similar to model B, you can refer to this step for installation orScan the corresponding product QR code on the manual and watch the installation video for installation

The accessory package has a hanging crystal ball copper needle,A brass needle Penetrate through the small hole of the crystal and bend it into a hook shape Then hang it as shown in step 4.
If the product you purchased is similar to model C, you can refer to this step for installation orScan the corresponding product QR code on the manual and watch the installation video for installation

If the product you purchased is similar to model D, you can refer to this step for installation orScan the corresponding product QR code on the manual and watch the installation video for installation.

If the product you purchased is similar to model E, you can refer to this step for installation orScan the corresponding product QR code on the manual and watch the installation video for installation.

The accessory includes a copper needle for hanging crystal ball. Insert the copper needle through the crystal hole, bend it into a hook shape and hang itas shownin step 3

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>