SID 6 Inch Electronic Reader User Manual
- June 8, 2024
- SID
Table of Contents
SID 6 Inch Electronic Reader
Product diagram
front
side
The back
Bottom
Introduction of the key function
Power switch / sleep wake
-up
| 1 . Press the power button to start the device
2 . Press the power key and hold it for 3-4 seconds to turn off the device. Select the “Shutdown” function in the menu
3 . Press the power button and then immediately release, and the device goes to hibernation
4 . Press the power button and immediately release to awaken the
sleep state
---|---
Type – C joggle| Connect the SID Note to the PC via the Type-C data line, or
Charge the device
LED lamp
|
Power supply charging indicator light
Main interface introduction
- The bottom end of the home page displays the current basic status of the device, including: W i F i connection status, Bluetooth power quantity and charging state show.
Below the status information is the function column, including: reading, application, and Settings. Click the device status information to enter the system Settings interface, and click the account number to enter the account management interface.
Reader
-
search
Local search for books, keyword support title, author, label, bookmark mark two lines in front of the pages; online search for books, keyword, support title, author, -
New bookshelf
After building a new bookshelf, you can move other book documents to the bookshelf -
Icon list switch
Click the icon to switch the icon or list display mode
-
Scan the document
Click to scan all documents in the internal storage and display in the default shelf; formats supported: PDF, TXT, EPU B, MOBI, RTF, FB 2, DOC, HTM L, etc.
-
WiFi Pass on the book
Mobile phone or computer and SID N o te machine or computer transfer book documents to the SID
When connected to the same LAN, you can N o te through wifi and will be added to the default shelf
-
Cloud synchronization
(Need to log in the account) Books and notes can be synchronized into the cloud storage. Every time you log in the account, the books and notes will be automatically synchronized the device from the cloud storage. -
Setup
Here you can set up to open / close books and notes automatically synchronized to SID N o te cloud server, export to third-party cloud disk account management, backup and recovery, etc.
Long press the shelf to rename, move, and delete the shelf:
Long press the book to select to lock / unlock, rename, move, and delete the book:
Read the shortcut menu
Click the cover of any book to enter the reading interface. The default is the full-screen display reading area, and the display at the bottom
Reading progress, time, and battery level.
- Click the left side (vertical) area of the screen to switch to the previous page;
- Click the right side of the screen to switch to the next page;
- Click the (vertical) area in the middle of the screen to call out the menu bar
- The menu at the top of the menu bar includes: return, enable / disable handwriting, display / hide handwritten notes, search, add / cancel bookmark, automatic page turning, refresh, share and set;
- The menu at the bottom of the menu bar includes: last chapter, progress adjustment, next chapter, catalog, bookmark, format / display, and mark
- Copyright belongs to Guangdong Zhihui Core Screen Technology Co., LTD. 13 / 42
Notes and notes
Search
In-document search is supported
Add/unbookmark
You can add bookmarks, when the bookmarked page, then display as the
cancelled bookmark icon, click to cancel the added bookmark record
Automatic page turning
Click to enable automatic page turning, and click again to stop automatic page
turning. In the dialog box that has popped up, Ok
Modify the time interval between the automatic turning of the pages.
Share
You can share book pages, supporting both email and Bluetooth.
Set up
Here you can set reading related properties, such as: display / hide the
chapter name, reading progress / time / power, global properties of the
format, export file storage address, etc.
Renovate
Full refresh page
Previous chapter / next chapter
You can quickly switch to the previous chapter or the next chapter, or drag
the progress bar in the middle to quickly switch to the progress.
Form
Can out the page format adjustment menu, the menu can adjust the font size,
line spacing, upper / lower spacing, left / right spacing
Directory
When reading the document, click in the middle of the Screen, you can call out
the menu bar, click on the directory in the lower left corner, and you can
switch to the document directory interface.
Click each directory to jump to the body of the page.
A bookmark
- When reading the document, click the middle of the screen, in the pop up menu bar, click the top as
- Previous page add bookmark, added bookmark page, click Cancel.
- Bookmarks can be viewed in the menu bar- -> bookmark page. This interface can delete bookmarks
- Click each bookmark to jump directly to the body of the page.
Tagging
When reading the document, you can presS the text and drag the word, highlight the required text and lower the line
Draw the dotted line and bottom the wavy line to mark the text. B) detault, use the last selected dimension, first make
Line it down by detault.
- Copy can be selected.
- You can jump to the B rowser to search for selected text.
- The search for and highlight to display the same text within the document.
- Click the marked text, and then click to delete the mark. VSelect can also add comments to the annotated text.
Annotation and annotation can be viewed in the menu bar- -> annotation page to
facilitate positioning and jump. This interface can delete notes and comments.
Click each dimension to jump directly to the body of the page. Mark all the
contents of the list page, support export to txt document, export directory to
Ffolder with the same name as the source document in / sd card / Annotations
directory.
Application
Click on the main intertace to display the installed application software APP
Press the app icon long enough to view its details:
Application market
You can download the required third-party App here
Statement
- All applications in this market are collected on the Internet, the purpose of sharing is only for everyone to learn and reference, if there is infringement, please delete in time!
- All applications in this market do not guarantee their integrity and security, please check the security after downloading.
- This market is completely free to share resources, need technical support, please buy the official business version!
- In addition to the application optimization related problems, in the use of the application of its own functional problems, please contact the application developer for consultation!
- This market does not have any right to provide the downloaded software and other resources, its version right belongs to the legal owner of the resource all!
Browser
Enter the website, or keyword in the address bar and click to access.
Use the Chinese state
Baidu search engine, in the English state, the default use of Google search
engine.
- The File Manager
- search
- Enter a file or folder name for a search
- new folder
After creating a new folder, you can move your notes to the folder;
-
select
In the selection interface, you can select / unselect folders and notes, and copy / move / delete selected -
sort
Select the ascending / descending order by note creation time, note modification time, and note name:
Long press the file to select how to open, rename, delete, copy, and move:
Long pressing the folder allows you to rename, delete, copy, and move:
SET
Click the main interface or display the main interface, the user can proceed
Network, general setting, account management, battery, system update,
password, view equipment related information, etc.
Network
WiFi
- After opening wifi, the device will automatically search for available WIFI hotspots, select the corresponding hotspot in the displayed WLAN network list, enter the password and other required information, and connect to the WiFT hotspots. The connection will be Successtul
- Show the WIFI connection successfully and WIFI, signal icon.
- After the WLAN hotspot connection is successfully set for the first time, the information of the hotspot will be automatically recorded. The next connection will only be in the notification bar and click the WLAN switch to automatically connect;
Conventional
General Settings include: system voice, time zone, input method, sound.
Account
The devices that log in to the account can enjoy the function of synchronizing
notes & books to the cloud server, and synchronizing notes & books to devices
from the cloud server
PC or mobile phone access https through the browser:// www.kloudnote
com can log in a view notes & books in cloud
storage.
Registration
Account registration, support with the mobile phone number or email
registration. Registered mobile phone number and email address are not
registered again,
The landing
Enter the mobile phone number or email address and the corresponding password
to log in.
Change the password
You can reset the account password through the mobile phone number or
email+Verification code. If you need to contact us.
Battery
It can set the automatic hibernation time without operation, the automatic
shutdown time, and check the battery status information.
Upgrade
- Every time the user enters the upda te interface, it will detect whether there is new software on the server, when there is new
- When the software, a prompt will pop up, click to download, and follow the prompt to install the new software.
- If the automatic download is opened, when a new software is detected, the new software will be automatically downloaded, and the user will be prompted to install after the download.
Safety
- Security Settings include: digital password setting and management, and fingerprint entry and management, and lock screen opening and closing. After setting the password, when the device is turned on and activated, you need to enter the password to enter the system;
- Please remember the password. If the password may lead to the system, please contact us.
- The password used when locking the book is consistent with the password for unlocking the screen.
About the
In “About”‘, you can view the device model, OS, serial number, software
version number, storage space, as well as privacy policy, user manual
download, feedback, personalized Settings and restore factory Settings.
Size of product
Accessories
The package contains the following standard accessories:
- SID N o te Host x1
- The Type-C data line, x 1
Safety guidelines
Please read the following Safe Use Guide before use and contact us if you encounter any technical difficulties.
Screen protection
The display screen of this equipment is E-PAPER screen, which is a fragile part. Do not directly hit, squeeze or press the screen, or fall from a high place on a hard surtace. It the display Screen is broken, please stop the use, and contact the official or other qualified professional for replacement. Do not disassemble and replace it by yourself.
Qualified accessories
- Only the batteries, chargers and other accessories that meet the safety standards of the equipment are allowed,
- Refer to the product configuration parameters for details.
- Use incompatible accessories for for equipment damage.
Stay away from liquid
- This equipment is not waterproof, please do not expose the equipment to a wet environment, nor in the rain
- Use the product in, stay away from any corrosive liquid.
- Do not tear down the machine
- Do not dismantle the equipment to avoid structural or screen damage. service environment
- The allowable temperature range of this equipment is 0°C-50 °C.
Frequently asked questions
How to switch on and off the machine
- In the shutdown state, long press the key for 2-3 seconds, enter the opening interface, after the animation display, enter the H o m e interface
- In the boot state, long press the key open for 5 seconds, that is, automatic shutdown.
- In the boot state, long press the key to open for 2-3 seconds, call out the menu bar, and select ” off
- Machine “; under the shutdown state, connect the Typec line to charge, namely automatically boot.
How to charge it
- Connect the device through the USB data cable to the computer USB for charging
- Connect USB cable and equipment through adapter (optional), connect to AC socket for charging;
- The charging time is about 4 hours pay attention to:
- If the connected adapter does not display the charging status, check whether the default power supply of the adapter is 5V (voltage mode
- Enclosure 4.5V – 5.4V), if not in this range, please replace the adapter and try again.
How to transfer the data
- Connect the mobile phone and the computer through the data cable for data transmission;
- Download books directly through WIFI;
- Through WIFI, wireless transmission, from the mobile phone or computer transmission of books to devices;.
- Direct directly to the built-in WIEI browser to access the web page to download data;
How to upgrade the system
- Online upgrades via OTA.
- Settings-> upgrade- -> Automatic detection of updates, WIFI networking, search upgrade package, directly upgrade the device online.
How to sync notes and books to cloud storage
- First, register for the account, and then log in to the account.
- Settings- -> More Settings- -> Check that automatic synchronization is on. It will automatically when it is on
- Synchronize notes and books into cloud storage; automatically synchronize notes and books from cloud storage each time you log your account
- Register to the equipment.
How to protect the equipment
Daily use as far as possible equipped with a hard shell book cover, to avoid
the screen received direct impact, extrusion;
When not in use, put the screen down on the horizontal surface, do not mix
hard objects between the screen and the horizontal surtace; avoid accumulating
heavy objects above the reader; keep away from various liquids.
Statement
Guangdong zhihui Core Screen Technology Co., Ltd. reserves the right to make
changes to the product specifications and contents included in the User
Manual, and are subject to changes without notice.
You can obtain product-related information through our website:
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interterence, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
tor compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there 1s no guarantee that interference will not
Occur in a particular installation. lf this equipment does cause harmful
interterence to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>