SAMSUNG Galaxy S23 Ultra Case Instructions
- June 15, 2024
- Samsung
Table of Contents
SAMSUNG Galaxy S23 Ultra Case
Product Information
Specifications:
- Product Name: Built-in Kickstand
- Compatibility: Compatible with most smartphones
- Material: PET screen protector
- Color: Black
Product Usage Instructions
How to Use the Kickstand:
- Step 1: Open the kickstand with your fingernail. You will hear a click to indicate that the stand is fully unfolded.
- Step 2: Support your phone horizontally.
- Step 3: Prop up your device vertically.
- Step 4: Push the stand as shown in the pictures. The stand is fully closed after hearing a click.
Installation Notes:
- Before installation, please remove any film or tempered glass screen protector.
- Push down the bottom right corner, but do not separate the frame and back cover first.
- Press the bottom left corner and then separate the front frame and back cover.
- Remove the films attached on both sides of the PET screen protector.
- Snap your phone onto the front frame.
- Put the front frame along with your phone into the back cover.
- Make sure every corner and edge are tightly pressed. Installation is completed.
- Follow the picture to take out your phone.
Frequently Asked Questions:
-
Q: Is the kickstand compatible with all smartphones?
A: The kickstand is compatible with most smartphones. However, it is recommended to check the product specifications or contact customer support for compatibility confirmation. -
Q: Can I use the kickstand in both horizontal and vertical orientations?
A: Yes, the kickstand can be used to support your phone in both horizontal and vertical orientations. -
Q: How do I remove the films attached to the PET screen protector?
A: To remove the films, gently peel them off from both sides of the PET screen protector.
How to use the kickstand
- Step 1 Open the kickstand with your fingernail. After hearing a click, the stand is fully unfolded
- Step 2 Support your phone horizontally
- Step 3 Prop up your device vertically
- Step 4 Push the stand as the picture shows. The stand is fully closed after hearing a click
Unique Design for Phone Case with Heavy Duty Military Grade Drop Protection
INSTALLATION NOTES
- Before installation, please remove any film or tempered glass screen protector.
- Push down the bottom right corner, but do not separate the frame and back cover first.
- Press the bottom left corner and then separate the front frame and back cover.
- Remove the films attached on both sides of the PET screen protector.
- Snap your phone onto the front frame.
- Put the front frame along with your phone into the back cover.
- Make sure every corner and edge are tightly pressed. Installation is completed.
- Follow the picture, taking out your phone.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>