PAFFEL SYSTEMS PS2 U2 04 Dual USB Stingray Edge Power Station User Manual
- June 15, 2024
- PAFFEL SYSTEMS
Table of Contents
- PAFFEL SYSTEMS PS2 U2 04 Dual USB Stingray Edge Power Station
- PRODUCT OVERVIEW
- IMPORTANT SAFETY INSTRUCTIONS
- ONE-YEAR LIMITED WARRANTY
- SURFACE MOUNT ASSEMBLY INSTRUCTIONS
- SURFACE MOUNT INSTALLATION INSTRUCTIONS
- UNDER MOUNT ASSEMBLY INSTRUCTIONS
- CONTACT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PAFFEL SYSTEMS PS2 U2 04 Dual USB Stingray Edge Power Station
PRODUCT OVERVIEW
- drawings are not to scale
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of injury to persons:
READ INSTRUCTIONS BEFORE OPERATING.
INJURY MAY RESULT FROM IMPROPER USE. NEVER REMOVE COVERS.
- This appliance should never be left unattended when in operation.
- Unplug the appliance from the outlet before relocating or troubleshooting.
- Do not connect an extension cord to this unit.
- Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
- Use this appliance only for its intended use as described in the operating instructions.
- Do not use attachments not recommended by the manufacturer.
- Keep all cords away from heated surfaces and pinch points.
- Do not use outdoors. INDOOR USE ONLY.
- Do not use it on an infant or a sleeping or unconscious person.
- Do not use it on sensitive skin. Prolonged exposure may harm sensitive skin – Always check the skin in contact with the heated area of the appliance.
- Never operate this appliance if it has a damaged cord or plugs, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact a service centre for examination and/ or repair.
- To disconnect, turn all controls to the off position, then remove the plug from the outlet.
DANGER – TO REDUCE RISK OF ELECTRIC SHOCK
- Do not reach for an appliance that has fallen into the water. Unplug immediately.
- Never use pins or other metallic fasteners with this appliance.
- Discard the appliance if the covering shows any sign of deterioration, such as checking, blistering, or cracking.
- Keep dry. Do not operate in a wet or moist environment.
ONE-YEAR LIMITED WARRANTY
Raffel Systems warrants its products against all defects in materials and
workmanship for a period of one year from the date of purchase, subject to the
following terms and conditions:
This warranty applies only for normal use of the product, and shall not be
effective for products or parts which do not function properly due to misuse,
alteration, installation, accident, negligence, misapplication, modification,
improper maintenance or commercial use, or if any product or part has been
serviced or repaired by other than Raffel Systems. This warranty extends only
to consumers and does not extend to Retailers.
This warranty is effective only if the product is operated in the country in
which the product was purchased. A product that requires modifications or
adoption to enable it to operate in any other country than the country for
which it was designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications is not covered under this warranty.
Liability of Raffel Systems shall be limited to the repair or replacement of
any defective product or part, which option shall be the sole decision of
Raffel Systems. This warranty is effective only on behalf of the original
owner of the product and is not transferable. This warranty is effective only
if the user manual instructions have been followed.
THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE
SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF RAFFEL
SYSTEMS WITH RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. RAFFEL SYSTEMS
SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
IN NO EVENT SHALL THIS WARRANTY REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF
ANY PART OR PARTS THAT ARE FOUND TO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD
OF THE WARRANTY. NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE
MATERIALS ARE NOT AVAILABLE, RAFFEL SYSTEMS RESERVES THE RIGHT TO MAKE PRODUCT
SUBSTITUTIONS IN PLACE OF REPAIR OR REPLACEMENT.
To obtain warranty service on this product, mail the product and your dated
sales receipt (as proof of purchase), postpaid, to the following address:
Raffel Systems Consumer Relations N112W14600 Mequon Road Germantown WI 53022
No CODs will be accepted.
SURFACE MOUNT ASSEMBLY INSTRUCTIONS
- Place the mounting bracket on the bottom of the power station.
- Attach the mounting bracket with the four screws provided.
- Thread hand knobs into the mounting bracket.
- Add a cap to the hand knob top (optional).
SURFACE MOUNT INSTALLATION INSTRUCTIONS
- Choose an edge mount location for the power station near a 120V power source. Slide the power station onto the horizontal surface until the bracket is flush.
- Twist hand knobs until the power station is secured.
- Plug the power station into a 120V power source.
UNDER MOUNT ASSEMBLY INSTRUCTIONS
- Place the mounting bracket on the bottom of the power station.
- Attach the mounting bracket using the provided screws.
UNDER MOUNT INSTALLATION INSTRUCTIONS
- Choose a location for the power station near a 120V power source. Place the power station onto a horizontal surface until the bracket is flush.
- Mount the power station to the surface using screws.
- Plug the power station into a 120V power source.
CONTACT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>