MD-MINI JSPMINI 5W Electric Guitar Amplification User Manual

MD-MINI JSPMINI 5W Electric Guitar Amplification

Product Information

Specifications:

• Model: MD-MINI20230906
• Dimensions: 148*210mm
• Weight: 128 grams

Product Usage Instructions:

Unboxing and Initial Setup

When you receive your MD-MINI20230906, follow these steps to set it up:

1. Open the package and take out the MD-MINI20230906.
2. Remove any protective films or covers from the product.
3. Place the MD-MINI20230906 on a flat and stable surface.
4. Connect the power cable to the designated port on the MD-MINI20230906 and plug the other end into a power outlet.
5. The MD-MINI20230906 will power on automatically. Wait for the startup process to complete.

Connecting to Devices

To connect the MD-MINI20230906 to your devices, follow these steps:

1. Identify the input and output ports on the MD-MINI20230906.
2. Connect the appropriate cables from your devices to the corresponding ports on the MD-MINI20230906.
3. Ensure that all connections are secure and properly inserted.

Operating the MD-MINI20230906

Once you have set up and connected your devices, you can start using the MD- MINI20230906:

1. Turn on your devices connected to the MD-MINI20230906.
2. Use the controls or remote provided by your devices to operate them.
3. For any specific functions or settings related to the MD-MINI20230906, refer to the user manual provided with your devices.

FAQ (Frequently Asked Questions)

Q: How do I reset the MD-MINI20230906?

A: To reset the MD-MINI20230906, locate the reset button on the device and press it using a small pointed object such as a paperclip. Hold the button for about 10 seconds until the device restarts.

Q: Can I use the MD-MINI20230906 with multiple devices simultaneously?

A: Yes, the MD-MINI20230906 supports multiple device connections. Simply connect each device to the corresponding ports and ensure they are powered on.

Function Introduction

1. POWER: Tap to turn on the device. When the indicator is on, the device is powered on, and the indicator is off after the device is powered off.

2. DC-5V: DC-5V charging port.

3. BT:Press and hold to turn on the Bluetooth function. Wher the Bluetooth is not paired, the green light flashes; when the pairing is successful, the green light is steady on.

4. MASTER: Total volume of the device.

5. EFX: Effect volume.

6. R-ROOM/R-HALL
   The first half adjusts the room reverb volume, and the second half adjusts the hall reverb volume.

7. CHORUS/DELAY:
   The first half adjusts the chorus volume and the second half adjusts the delay volume.

8. BASS:Adjust the volume of bass.

9. TREBLE: Adjust the high pitch volume.

10. GAIN:Adjust the gain.

11. .CLEAN
    B.OVERDRIVE
    C.DISTORTION

Function and electrical performance

10. HEADPHONE: headphone outlet.
11. RUX/REC: intro.
12. INPUT: device input.

Audio

• Frequency Response: 20Hz~20KHz
• Sensitivity: 110db(+-3db)
• Distortion Degree: <1%
• Rated Power: SW
• Audio Signal-to-noise Ratio: >90dB

Bluetooth

• Bluetooth Solution: Jerry
• Bluetooth Version: Bluetooth V5.0
• Frequency Range: 2.402GHz-2.480GHz
• Communication Distance: Straight line > =10 m
• Pairing Name: MINGS-BT
• Support System: Android/iSO/Windows
• Transmission Power: Class 2 max. 4dBm

Speaker Playback Time And Charging Performance

• Continuous Play Time: >3H
• Charging Time: <3H

BATTERIES

• Volume: 18650 with protective plate
• Type: Lithium-ion secondary battery
• Rated Voltage: 3. 7V Nominal capacity :2000mAH
• Rechargeable Times: >500 times Quantity: 1 section

Matters needing attention

• During charging or normal operation, the machine heats up slightly, which is a normal phenomenon.
• When cleaning the machine, turn off the power supply and disconnect all external power connections.
• Use an antistatic cloth to clean and wipe the entire machine. Do not use chemical substances (such as alcohol and benzene), chemical detergent, or abrasive cleaning agent.
• Please keep this product as dry as possible and do not use this unit in an overly humid environment.
• Please use the accessories approved by the company, do not disassemble the machine without authorization, otherwise you can not enjoy the company’s free warranty service.

Safety warnings and prohibitions

• For correct and safe use, please read this safety notice carefully
• In the place where the use of radio equipment is prohibited or the use of the machine will cause interference and safety risks of other electronic equipment, please turn off the power supply of the machine.
• In places marked with inflammable and explosive signs, please do not use the machine and turn off the power supply of the machine.
• The machine will explode when thrown into the fire. Do not throw the machine into the fire.
• This speaker is specially equipped for electric guitar, with lightweight and portable characteristics, can be used in indoor and outdoor performance, with rich timbre and sound adjustment, as well as Bluetooth sound performance function. The headset playback function can be used for quiet practice, which can be used by professionals or enthusiasts.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>