D CENT iD-Black Hardware Wallet User Guide
- June 9, 2024
- D CENT
Table of Contents
iD-Black Hardware Wallet
User Guide D’CENT User Guide
iD-Black Hardware Wallet
Compact design with smart safety functions Hardware Wallet D’CENT
Product Specifications
| Product Name | Hardware Wallet |
|---|---|
| Model | D’CENT ID-Black |
| CPU | STMkro Cortex M4 100MHz |
| Memory | 1.0MB Flash |
| Secure Element | NXP P60 (EALS+) |
| Display | OLED 128×128 Pixels |
| Fingerprint Sensor | Capacitive Touch Sensor 509 dpi resolution |
160×160 Pixels with 8 bit Cepa
Battery| U-ion Polymer 530mAlt 3.7%
Input Voltage| 5.0V
Bluetooth Frequency| 2402 MHz – 2480 MHz
Size| 4.3 x 7.7 x 1.1cm
Weight| 36g
Working Temperature| 0 ˜ 40’t
Connectivity| – Bluetooth Low Energy (BLE 5.0 Nordic)
– USB OTG Full Speed / Micro USB Spin
Country of origin| Made In Korea
Get Started
If you received it for the first time, please initialize your D’CENT. After
the D’CENT wallet has been shipped from the factory, initialization of the
wallet must be perform-ed to secure your hardware before user’s private key
can be generated. During initialization, you must register the PIN (password)
and fingerprint for security.
(D’CENT COMPONENT ] 
http://support.idcent.io
-
Press the power button for 2 seconds to turn on the D’CENT wallet. (Press it again for 2 seconds to turn off the power)
-
Use the up and down button to select the desired language and press the (OK) button. (English / Korean / Chinese / Japanese)
-
Select Create Wallet
-
Register 4-digit PIN as password
– Use the (up or down) button to select the desired number and press the (OK) button.
-
Re-enter the PIN
– Re-enter the same 4-digit numeric PIN.
– If a different PIN has been entered, you will need to re-peat step 4 (PIN registration procedure). -
Fingerprint registration
Register your fingerprint by lightly touching against the fingerprint sensor, repeat the process by slightly changing the angle of your finger when touching the sensor. -
PIN (password) and fingerprint registration complete When you successfully register your PIN (password-mandatory) and fingerprint, security is set on your D’CENT wallet.
-
Generate recovery seeds: Write down all 24 words displ-ayed on the screen to the Recovery Card. Press the (OK) button.
[Precautions]
Recovery words are displayed only once during initializa-tion, and words that are displayed on the screen must be entered on the recovery card in the same order. Recovery words and recovery cards are essential for recovering your wallet, take extra care to secure them. -
Initialization complete: You will be asked to enter two randomly chosen seeds from your recovery card for verification. Normal entry completes the initialization.
Using Services
D’CENT works in conjunction with the wallet application. Download and install
the wallet application.
http://support.idcent.io
Product Warranty
Thank you for purchasing D’CENT. The warranty period is calculated from the
date of pur-chase, so be sure to indicate the purchase date and keep your
receipt.
Purchase date :…………………
Place of purchase :……………………
One-year warranty from the date of purchase
[Compensation Regulation]
We will exchange your product for free if it is found to malfu-nction or
defective within the warranty period from the date of purchase. Please check
the D’CENT homepage for policies on detailed compensation regulation.
http://idcent.io
[Precautions] The manufacturer shall not be held liable for the loss of crypt-
ocurrency resulting from misuse and careless management by the customer.
FCC Certification Requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. RF Radiation Exposure StaternentThis equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines rules as this equipment has
very low levels of RF energy. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. loTrust Co.ltd
(www.iotrust.kr) 7F, 747, Seolleung-ro, Gangnam-gu,
Seoul, Korea.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>