UPSKY 170 Dog Water Fountain User Manual
- August 20, 2024
- UPSKY
Table of Contents
UPSKY 170 Dog Water Fountain
INTRODUCTION
With the UPSKY 170 Dog Water Fountain, you can give your pets the improved way to stay hydrated that they need. With a large 1.8-gallon volume, this fountain makes sure that your dog always has fresh, clean water available, which is good for their health and hydration. The Acrylonitrile Butadiene Styrene (ABS) used to make the UPSKY 170 is very strong, so it can handle daily use while still looking good. For easy placement, its small size (11.8 x 11.8 x 6.6 inches) makes it easy to fit into any home, and its weight of 3.5 pounds makes it even easier. The Smart LED Light on this fountain is one of its best features. It not only adds a modern touch, but it also helps you remember to fill up the water. At $35.99, this fountain is a great deal for such a high- quality item. It should be an important part of your pet care routine.
SPECIFICATIONS
| Brand | UPSKY |
|---|---|
| Capacity | 1.8 Gallons |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Target Species | Dog |
| Product Dimensions | 11.8 x 11.8 x 6.6 inches |
| Weight | 3.5 Pounds |
| Special Feature | Smart LED Light |
| Item Model Number | 170 |
| Manufacturer | UPSKY |
| Price | $35.99 |
WHAT’S IN THE BOX
- Water Fountain
- Manual
PRODUCT OVERVIEW
FEATURES
- 7L Large Capacity: It can hold 1.8 gallons (7 liters) of water, so it’s good for all dog types, cats, and homes with more than one pet. Lessens the number of bottles needed and gives you a lot of water.
- Wide Drinking Area: It has a large, deep drinking area with 700ml of emergency water, so dogs can stay hydrated even when the power goes out.
- Easy to Use: It has a very quiet pump that only makes 30 decibels of noise, so it won’t bother pets or their owners.
- Design: The unique shape of the fountainhead spreads water into 9 streams, which is attractive to dogs and makes them more likely to drink more often.
- Smart LED Light: It comes with a smart LED light system that keeps the flame from drying out. When the water level is low, the LED light turns red to let you know that you need to fill up the fountain again.
- It’s easy to see how much water is in the tank because it’s clear. This way, you can make sure that your pets always have access to fresh water.
- The Quadruple Filtration System has two big replaceable filters that work together to filter water thoroughly. The filters have a microporous cotton layer, an activated carbon layer, an ion exchange resin layer, and a high-density sponge.
- Built to be easy to put together and take apart, and comes with brushes and tools to clean all the parts well.
- Simple Installation: It’s simple to set up because the directions are clear and the design is user-friendly.
- Better Health and Hydration: The filter system makes sure that pets can get clean, fresh water, which is good for their health and hydration.
- Built to last: Made from high-quality materials that will last for a long time.
- An easy way to refill is to press buttons on both sides of the water tray, which makes it easy to take out.
- Effective filter: The four-layer filter system gets rid of impurities and smells in the water and softens it so it tastes better.
- Low Maintenance: It doesn’t need much upkeep; just change the filters every two to four weeks to get the best performance.
- High-Level Safety: The pump’s anti-dry burning feature makes it safer by not working when the water level is too low.
SETUP GUIDE
- Unpack the Fountain: Take everything out of the box and make sure you have all of the parts, such as the fountain, filters, and any extras that came with it.
- Put the Fountain Together: To put the fountain together, follow the directions and connect all the parts. Keep the fountain head, water tray, and pump firmly connected.
- Install the Filters: Follow the manufacturer’s instructions and put the replacement filters in the right places.
- Fill with Water: Fill the fountain with water until it hits the right level. Use the clear tank to get an idea of how much water is in it.
- To power the fountain, either plug in the power charger or connect it to a power source. Make sure the pump is hooked and set up correctly.
- To test the fountain, turn it on and watch the water run. Make sure the pump is running quietly and that water is moving through the fountain head.
- Variable Flow Settings: If your model has variable flow settings, pick the mode that works best for your pets.
- Where to Put the Fountain: Put the fountain somewhere that is easy for your pets to get to. Make sure it’s on a stable, flat surface.
- Check for Leaks: Look for drips or leaks in the water. If you need to, tighten any links to stop leaks.
- Watch the Fountain During Initial Setup: Watch the fountain for a short time to make sure it works right and that pets are using it.
- Checking the Water Level Often: Use the clear tank to see how much water is in it and add more as needed.
- Clean Often: To keep the fountain in good shape, follow the cleaning directions. Take the parts apart and clean them as directed.
- Replace Filters: To keep the water quality and fountain performance at their best, change the filters every two to four weeks.
- Check the LED Indicator: Make sure the LED light changes colors to let you know when the water level is low.
CARE & MAINTENANCE
- Regular Cleaning: Take the fountain apart and clean all of its parts often to keep dirt and algae from building up. Do not use harsh chemicals. Instead, use light soap and water.
- Filter Replacement: To make sure the water purification works well, replace the filters every two to four weeks or as directed by the maker.
- Cleaning the Pump: To keep it running at its best, clean the pump every two to four weeks. Clean it well with the brushes and tools that came with it.
- Check for Wear: Make sure to check the fountain often for damage or signs of wear. Replace any broken parts to keep the system working.
- Watch the Water Level: Make sure your cats always have access to clean water by checking the water level and adding more as needed.
- Check for Leaks: Check the waterfall for leaks or drips every so often. To stop spills, tighten all the seals and connections.
- Clean the Tank: Thoroughly wash the clear tank to get rid of any buildup or dust that could affect the quality of the water.
- Adjust Flow Settings: Check that the flow settings are right and make any necessary changes to suit your pets’ tastes.
- How to Store It Right: If you need to store the fountain, take it apart, clean every part, and put it somewhere dry and cool.
- Avoid Harsh Chemicals: When cleaning, don’t use harsh chemicals or rough materials because they could damage the fountain or make the water less clean.
- Check Electrical Parts: Make sure that the electrical parts, like the power adapter and pump, are working properly. If you need to, replace it.
- Make Sure All Parts Are Together properly: Make sure all the parts are together properly to avoid problems or leaks.
- Change the Battery: If your fountain has any parts that need batteries, change them when they die.
- Keep Pets Safe: Check to see if the form and features of the fountain could hurt your pets.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| Water fountain not turning on | Unplugged or faulty power source | Check the |
power connection and plug in securely
Low water flow| Water level is low or filter is clogged| Refill the water and
clean or replace the filter
Smart LED Light not working| Power supply issue or bulb malfunction| Check
power connection or replace the LED light if possible
Noise from the pump| Pump is clogged or not submerged properly| Clean the pump
and ensure it is fully submerged
Water fountain leaking| Overfilled or improperly assembled| Ensure proper
assembly and fill to the correct level
Water has an unpleasant odor| Dirty filter or stagnant water| Replace the
filter and clean the fountain regularly
Pets not using the fountain| Unfamiliar or too loud| Gradually introduce the
fountain and ensure it is placed in a quiet area
Fountain stops working intermittently| Power supply issue or dirty pump| Check
the power supply and clean the pump thoroughly
Water flow too strong or weak| Incorrect pump setting| Adjust the pump setting
for desired water flow
Algae growth in the fountain| Infrequent cleaning or direct sunlight| Clean
the fountain more frequently and place it away from direct sunlight
Pump vibrating loudly| Pump is not securely placed| Secure the pump properly
in its compartment
Filter not fitting properly| Incorrect filter installation| Ensure the filter
is installed correctly
Water splashing out of the fountain| Incorrect water level or fountain
placement| Adjust water level and ensure the fountain is on a flat surface
Pets tipping over the fountain| Fountain too light or improperly placed| Place
the fountain on a non-slip mat or in a corner
Water not staying clean| Filter needs replacing or water needs changing|
Replace filter and change water regularly
PROS & CONS
Pros:
- Large 1.8-gallon capacity, ideal for medium to large dogs.
- Durable ABS construction for long-lasting use.
- Smart LED Light for easy monitoring of water levels.
- Compact design fits well in any home.
- Affordable price for the features offered.
Cons:
- Regular cleaning is necessary to maintain water quality.
- Requires a power outlet, limiting placement options.
- The LED light may not be suitable for pets sensitive to light.
- Larger size may not be ideal for very small spaces.
- Some pets may take time to adjust to the fountain.
WARRANTY
The UPSKY 170 Dog Water Fountain comes with a 1-year warranty. This warranty covers any defects in materials or workmanship, ensuring that your purchase is protected. If you encounter any issues within this period, UPSKY will repair or replace the product at no additional cost. Be sure to keep your purchase receipt to validate the warranty when needed.
FREQUENTLY ASKED QUESTIONS
What is the capacity of the UPSKY 170 Dog Water Fountain?
The UPSKY 170 Dog Water Fountain has a capacity of 1.8 gallons.
What material is the UPSKY 170 Dog Water Fountain made of?
The UPSKY 170 Dog Water Fountain is made from Acrylonitrile Butadiene Styrene (ABS).
What are the dimensions of the UPSKY 170 Dog Water Fountain?
The dimensions of the UPSKY 170 Dog Water Fountain are 11.8 x 11.8 x 6.6 inches.
How much does the UPSKY 170 Dog Water Fountain weigh?
The UPSKY 170 Dog Water Fountain weighs 3.5 pounds.
What is the price of the UPSKY 170 Dog Water Fountain?
The UPSKY 170 Dog Water Fountain is priced at $35.99.
What smart feature does the UPSKY 170 Dog Water Fountain include?
The UPSKY 170 Dog Water Fountain includes a smart LED light feature.
How does the LED light in the UPSKY 170 Dog Water Fountain benefit users?
The LED light in the UPSKY 170 Dog Water Fountain helps users monitor the water level and visibility, especially in low-light conditions.
What are the benefits of using the UPSKY 170 Dog Water Fountain for pets?
The UPSKY 170 Dog Water Fountain provides a continuous flow of clean water, encourages pets to drink more, and helps prevent dehydration.
How does the UPSKY 170 Dog Water Fountain ensure the water remains clean?
The UPSKY 170 Dog Water Fountain features a filtration system that helps keep the water clean and fresh for pets.
What type of power source does the UPSKY 170 Dog Water Fountain use?
The UPSKY 170 Dog Water Fountain uses a corded electric power source.
How often should the filter in the UPSKY 170 Dog Water Fountain be replaced?
The filter in the UPSKY 170 Dog Water Fountain should be replaced regularly, typically every 2-4 weeks, depending on usage and water quality.
Why is my UPSKY 170 Dog Water Fountain not turning on?
Ensure that the power adapter is securely connected to both the fountain and a working power outlet. Test the outlet with another device to confirm it’s functional. If the fountain still doesn’t turn on, there may be an issue with the power adapter or internal wiring.
What should I do if the UPSKY 170 Dog Water Fountain is not pumping water?
Check if the water level is above the minimum required level for the pump to operate. If the water level is sufficient, clean the pump to remove any debris that might be blocking it.
Why is the water flow from my UPSKY 170 Dog Water Fountain weak or inconsistent?
Weak or inconsistent water flow could be due to a clogged filter or a dirty pump. Clean or replace the filter and ensure the pump is free of debris. If this doesn’t resolve the problem, adjusting the pump settings or replacing the pump might be necessary.
How can I fix my UPSKY 170 Dog Water Fountain if it is making loud noises?
Loud noises usually indicate that the pump is not fully submerged in water or that air is trapped in the system. Ensure the water level is adequate and reposition the pump to release any air bubbles. If the noise persists, cleaning the pump or replacing it may be required.