T86PND 6.86 Inches Smart Screen Player

Product Information

Specifications

• 6.86 inch high-definition display (1280 * 480)
• Touch control
• Bluetooth
• WIFI
• Audio output
• Type C interface power supply

Product Usage Instructions

1. Installation

To install the T86PND Smart Screen Player, follow these
steps:

1. Mount the wide-angle camera in the rear of the car.

2. Connect the camera to the real-time integration equipment.

3. Fix the display on the center console using the monitor
   base.

4. Connect the power cord to the Type C power cable and plug it
   into the motherboard power supply interface.

5. Connect the audio output to the original car audio system using
   the AUX cable.

2. Functionality

The T86PND Smart Screen Player offers the following
functionalities:

• Real-time display of images captured by the rear camera.

• Intuitive obstacle and pedestrian visualization in the rear of
  the car.

• Reduction of collisions and accidents through effective visual
  assistance.

• Ability to play movies and music from an SD card.

• Support for playing music while driving and watching movies
  while resting.

• Support for Apple CarPlay and Android Auto.

• Support for voice control.

3. Operation

The T86PND Smart Screen Player can be operated using the
following methods:

• Touch control on the 6.86-inch high-definition IPS screen.
• Menu navigation through the graphical interface.
• Setting screen savers to turn off, 10 seconds, 30 seconds, or 1
  minute.

4. Audio and Power

The product includes the following audio and power features:

• Support for local speaker playback, Carplay/Auto, FM, and
  AUX.

• The microphone for audio emission.

• The power input through a wide voltage range of 7-32V with
  car-grade anti-surge and anti-reverse connection protection.

FAQ (Frequently Asked Questions)

Q: What languages are supported by the T86PND Smart Screen

Player?

A: The T86PND supports Simplified Chinese, Traditional Chinese,
English, Russian, Spanish, French, German, Japanese, Korean,
Arabic, Italian, and Portuguese.

Q: What are the available screen saver options?

A: The screen savers can be set to turn off, 10 seconds, 30
seconds, or 1 minute.

Q: Can I play movies and music from an SD card?

A: Yes, the T86PND Smart Screen Player supports playing movies
and music from an SD card.

T86PND 6.86 Inches Smart Screen Player
Product specification

Directory
…………………………………………………………………………………………………………………………….. 3 ……………………………………………………………………………………………………………….. 4
………………………………………………………………………………………………………………………… 5 …………………………………………………………………………………………………………………………..6 …………………………………………………………………………………………………………………………. 7
……………………………………………………………………………………………………………………. 8 A. Apple CarPlay ……………………………………………………………………………………………………………………………… 10 B. Andorid Auto ………………………………………………………………………………………………………………………………. 12 C. Bluetooth Music …………………………………………………………………………………………………………………………..14 D. Media Player ……………………………………………………………………………………………………………………………….. 15 E. Audio output ……………………………………………………………………………………………………………………………….. 17 F. Bluetooth ……………………………………………………………………………………………………………………………………… 20 G. Setting …………………………………………………………………………………………………………………………………………. 21 Reverse Line Calibration ………………………………………………………………………………………………………………….24
……………………………………………………………………………………………………………………………. 25 ……………………………………………………………………………………………………………………… 28

The T86PND uses a wide-angle camera mounted in the rear of the car to capture images of the rear area and transmit them to the real-time integration equipment. With the help of this system, drivers can intuitively and effectively see obstacles and pedestrians in the rear of the car, reducing the occurrence of collisions and other accidents. This product can also play movies and music from the SD card. You can play music while driving and watch movies while resting.

List of product accessories:

Name The host
The power cord
Pull back camera Pull the headphone extension cord
back
Monitor base
AUX cable

Graphic

Instructions 6.86 inch high-definition display (1280 * 480) / touch
control / Bluetooth / WIFI / audio output / Type C
interface power supply

Number 1

Type C power cable / 7V-32V /3A current / integrated line/cigarette lighter

1

AHD FHD (1080P)/4PIN BMW camera

Optional

Pull back headphone cable / 6m /2.5mm headphone +4PIN BMW head/double shield/with reverse cable

Optional

To support the display and fix it on the center console

1

Transmit the audio of the equipment to the original car audio system

1

Project
system
Video display Smart connected The video
store Audio part
Power part Other

Function introduction
language
Operation interface Mode of operation Real-time display The screen saver

Performance indicators Simplified Chinese / Traditional Chinese / English / Russian / Spanish / French / German / Japanese / Korean / Arabic / Italian / Portuguese Graphical menu operation
Touch 6.86-inch high-definition IPS screen, 1280X480 Screen savers can be set to: Turn off / 10 seconds / 30 seconds /1 minute

Wi-Fi

Supports Apple CarPlay / Android Auto

SD card

Play movies and music

Audio emission The microphone
The power input
Working temperature

Support local speaker playback, Carplay/Auto, FM, AUX Support voice control, menu can be set to turn off The step-down line supports a wide voltage range of 7-32V, and has car-grade anti-surge, anti-reverse connection and other power protection.
-4~149

serial number

interface

illustrate

1

Type C interface Motherboard power supply interface

Cigarette lighter takes electricity

directly;

Note: Please use the standard cigarette lighter. If you

don’t use our original charger, you need to buy a

2

Cigarette lighter high-quality cigarette charger that meets the

standards, otherwise it is easy to damage the

machine or cause other injuries due to insufficient

voltage and heat, and the FM transmission function

will not work properly.

Locate the drilling hole, find the appropriate installation position in the license plate attachment, mark it with a pen and then drill the appropriate size of the screw hole. Fix the camera to the rear of the car with screws, the reversing trigger wire (red thin wire) needs to be connected to the positive pole of the reversing light, and finally use the camera extension cable to connect to the monitor.

Home button: Click to return to the main interface of the smart screen

Brightness button: Click to adjust the brightness of the screen

Volume button: Click to adjust the volume

Screen off button: Click to turn off the screen, then click any position to wake up

the screen

When you insert the camera, the icon will change to[

] Camera: Click to

view the rear camera screen

Previous song: Click to play the previous song

Play/Pause: Play or pause the song

Next song: Click to play the next song

Media player: Click to enter the movie and music playback interface

Audio output: Click to select the sound playing mode

Settings: Click to enter the function setting interface

Apple CarPlay: Dedicated car screen projection program for Apple mobile phones Andorid Auto: A dedicated car screen projection program for Android phones Bluetooth music: Click to enter the Bluetooth connection interface

A. Apple CarPlay
As shown in the figure, click the [Apple CarPlay] button to enter the Apple CarPlay. Turn on the Wi-Fi and Bluetooth of the mobile phone first, then as shown in the figure below, select the [Apple CarPlay] option, click the [BT Manage] option of the interface, connect Bluetooth with the phone, you can open the application. When the machine is powered on, it will try to automatically connect to the last connected phone. (Turn off your phone’s Wi- Fi to disconnect, Apple CarPlay option only supports iPhone phones, Android phone please select [Android auto] option) Note: In the drop-down menu of the mobile phone, you need to click to turn off Bluetooth first, and then click the Turn off WiFi button to disconnect. Just turn off the WiFi button alone, and the car will keep trying to reconnect.

Full Screen mode

Half screen mode

B. Andorid Auto
As shown in the figure, click the [Android Auto] button to enter the Android auto. Turn on the Wi-Fi and Bluetooth of the mobile phone first, then as shown in the figure below, select the [Android auto] option, click the [BT Manage] option of the interface, connect Bluetooth with the phone, you can open the application. When the machine is powered on, it will try to automatically connect to the last connected phone. (Turn off your phone’s Wi-Fi to disconnect)
Full Screen mode

Half screen mode

C. Bluetooth Music

Turn on the Wi-Fi and Bluetooth of the mobile phone first, and select [Bluetooth Music] option. Click the [BT Manage] option on the interface to connect Bluetooth to the mobile phone and start playing music.

The buttons correspond to “previous song”, “play/pause” and “next song” respectively.

Click on the Lyrics button [

] to display the lyrics.

(Some mobile music player apps do not support displaying lyrics)

D. Media Player
As shown in the figure above, click the [media player] button to enter the movie and music playing interface.

If there are music or video files in the SD card, you can select the music or video you want to play on the right.

The lower left corner buttons correspond to: “Play / Pause” and “Next paragraph”

respectively. [

]

Video support format F4V MOV MP4 TS
Audio format support: MP3 / WAV

Coding format AVCH.264 AVCH.264 AVCH.264 AVCH.264

E. Audio output
As shown in the figure above, click the [Audio Output] button to enter the audio output selection interface.
Speaker: The sound will be played from the speaker of the smart screen.
Carplay/Auto: Select this mode, and then connect toApple CarPlayorAndroid Auto to cast the screen, you can use the phone’s Bluetooth to directly connect to the original car’s Bluetooth. After the connection is successful, all sounds from the device will be transmitted

to the original car speakers via Bluetooth.

After selecting this mode, the volume icon will change to the Bluetooth transmission icon

, and the volume cannot be adjusted on this device, so the volume must be

adjusted on the original car.

FM: After selecting this mode, the FM transmission mode will be turned on by default. For example, if the device’s FM transmit band is tuned to FM 106.0 MHz (any unoccupied channel can be used), the car radio will also tune its receive band to the same FM 106.0 Hz. After the connection is successful, all the sounds of the device will be transmitted to the original car speakers through FM transmission.

After selecting this mode, the volume icon will change to an FM transmission icon

,

and the volume cannot be adjusted on this device, so the volume must be adjusted on the

original car.

(Not using the original power cord may result in deterioration of the FM transmission signal

or loss of function.)

AUX: After selecting this mode, the AUX output mode will be turned on by default. Use the AUX sound source cable to connect the smart screen to the original car. After the connection is successful, all the sounds of the device will be transmitted to the original car speakers through the AUX sound source cable for playback.

After selecting this mode, the volume icon will change to the AUX output icon

, and

the volume cannot be adjusted on this device, so the volume must be adjusted on the

original car.

F. Bluetooth

As shown in the figure above, click the Bluetooth button [ device after entering the Bluetooth interface.

] to switch on the

The page will display the device name, such as: T86-1CCC0C, and click the Modify button [ ] to modify the Bluetooth name of the device.
Select the device name with Bluetooth, and the remote device name of the phone will appear after successfully connecting.

At this time, you can play mobile phone music and other functions. After connecting to Bluetooth, you can use the call function:

After turning on the “Auto Connect” button, even after the mobile phone is disconnected, the machine will automatically try to connect to the phone.

Click the Disconnect button [

] to actively disconnect the Bluetooth.

G. Setting
Click on the [Reminder tone] to enter the settings: you can choose to turn it off or on. After selecting off, the power on sound effect and touch and button sound effects will be turned off. (Different models may have different options, subject to the actual product) Click [Screen saver] to enter settings: screensaver can be set as: Turn off / 10s / 30s / 1min. After setting for 10 seconds or 1 minute, if the system does not operate for the corresponding time, the screen will automatically turn off. After entering the screensaver, press the power button again to turn on the screen.

Click on [Voice Control] to enter the settings: Voice control commands include: Show rear camera / Turn on display / Turn off display / Show all cameras. After opening the option, on the main interface, say the corresponding command entry, and the system will perform the corresponding operation. Click on [Image Mirror] to enter the settings: you can choose to turn it off or on. This option makes it easier for customers to flexibly install cameras. Click on [Reverse Line Calibration] to enter the settings: Please refer to the following instructions. Click on [Driving Position] to enter the settings: You can choose between left-hand or right-hand drive, and the shortcut menu bar in Apple CarPlay. Select left rudder on the left, select right rudder on the right
Click on [Language] to enter the settings: Language can be set: Simplified Chinese / Traditional Chinese / English / Russian / Spanish / French / German / Japanese / Korean / Arabic / Italian / Portuguese

Click [Factory reset] to enter the settings: Restore factory settings, and the system will restore all settings to their original state.
Click on [Firmware Version] to enter the menu: This option allows you to see the current basic version for easy confirmation.

Reverse Line Calibration
Click on [Reversing Control] to enter the settings:

Park the car in the middle of the parking space.
Manually drag the left, adjust the position of the reversing assist line up, left and right, so that the reverse assist line is horizontal to the parking line on the left of the ground.
Then drag the right side by hand, adjust the position of the reversing assist line up, down and down, so that the reverse assist line is horizontal to the parking line on the right side of the ground.

Drag the [ and right.

] at the bottom to adjust the position of the reverse line to the left

After adjusting the reversing line, click [confirm] to save the calibration.

Reminder: Please ensure that there is no obstruction between the mobile phone and the device, and the Wi-Fi/Bluetooth signal communication is smooth, otherwise the product functions cannot be used smoothly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>