XOCLON X1 Finger Vein Smart Lock Instruction Manual
- June 15, 2024
- XOCLON
Table of Contents
XOCLON X1 Finger Vein Smart Lock
Product Information
Specifications
- Product Name: X1 Finger Vein Smart Lock
- Installation Guide Programming Instruction
- Device Compatibility: Works with Tuya SmartApp
- Power Source: Battery operated
- Locking Mechanism: Finger vein recognition, code, and card
- Locking Direction: Reversible
FAQ
- Q: Why won’t the lock accept any inputs after entering a code or finger vein or card incorrectly multiple times?
- A: The lock will freeze for 90 seconds after 5 unsuccessful attempts at entering an invalid code or fingerprint (10 attempts for finger vein). You can unlock the lock via the Tuya App or wait 90 seconds to continue.
- Q: How do I lock the lock manually from outside?
- A: Press and hold the “#” button to lock the lock from outside.
- Q: What should I do if the batteries are completely dead and I can’t unlock the device?
- A: When the batteries are completely dead, you can use the physical keys to unlock the device. Alternatively, you can connect a power bank to your lock for emergency power supply.
- Q: How do I share access of the lock to my family members?
- A: To share access to the lock with your family members, open the Tuya App, click on the “Me” icon, then select “Home Management” from the menu. Follow the instructions in the app to continue.
- Q: Why are the actions for locking and unlocking executed in opposite directions?
- A: It may be due to incorrect detection of the unlocking direction of the door lock. Remove the batteries, wait for 1 minute, and then reinstall them. The door lock will automatically detect and calibrate the correct unlocking direction.
Product Usage Instructions
Installation
- Do not use an electric screwdriver during installation.
- Follow the installation guide provided in the user manual for step-by-step instructions on installing the X1 Finger Vein Smart Lock.
Tuya App Use Guide
- Download the Tuya SmartApp from Google Play or App Store.
- Scan the QR code provided in the manual to download the Tuya App.
- Open the Tuya App and follow the on-screen instructions to set up and connect your X1 Finger Vein Smart Lock.
Locking and Unlocking
- To lock the lock manually from outside, press and hold the “#” button.
- If the lock won’t accept any inputs after entering an incorrect code, finger vein, or card multiple times, the lock will freeze for 90 seconds. You can unlock the lock via the Tuya App or wait for 90 seconds to continue.
- If the batteries are completely dead, you can use the physical keys to unlock the device. Alternatively, you can connect a power bank to the lock for emergency power supply.
- If the actions for locking and unlocking are executed in opposite directions, it may be due to incorrect detection of the unlocking direction. Remove the batteries, wait for 1 minute, and then reinstall them. The door lock will automatically detect and calibrate the correct unlocking direction.
Sharing Access
- Open the Tuya App.
- Click on the “Me” icon.
- Select “Home Management” from the menu.
- Follow the instructions in the app to share access to the lock with your family members.
Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Thank you for purchasing our products. Please review this manual carefully before operation your device. All pictures in this manual are for illustration purpose only. Actual product may vary due to product upgrade.
TOOL REQUIRED
- Do not use an electric screwdriver during Installation.
INSTALLATION OVERVIEW
Parts List
- If any parts are lost or damaged, please contact Customer Support.
Installation Instructions
STEP 1: Prepare the door and check dimensions
- Measure to confirm that the hole in the door is 1-1/2″‘ or 2-1/8″ (38mm or 54mm)
- Measure to confirm that the hole in the door edge is 1″ (25mm).
- Measure to confirm that the backset is either 2-3/8″ or 2-3/4″ (60 or 70mm)
- Measure to confirm that the door is 1-3/8″ to 2″ (35 mm or 50mm) thick.
- Make sure the hole in the door frame is drilled a minimum of 1″ (25mm) deep, to leave enough space for the deadbolt to extend into the door frame when the door is locked.
Notes
- Make sure the door frame is aligned with the door.
- There are no obstructions stuck in the door frame.
STEP 2: Install the latch and strike
- Determine backset and adjust the latch
- Hold the latch in front of the door hole, with the latch face flush against the door edge. Is the slotted hole centered in the door hole?
- YES
- No adjustment is required.
- Proceed to next step.
- NO
- Slotted hole is NOT centered.
- Rotate and pull the latch as shown to extend latch.
- Install the latch
- Use a screwdriver to test if deadbolt works smoothly.
- Install strike on the door frame.
- IMPORTANT: Make sure the hole in door frame is drilled a minimum of 1″ (25mm) deep
STEP 3: Install exterior assembly
IMPORTANT
-
Before installation, make sure the latch is fully retracted (in the unlocked position)
-
Measure the diameter of the hole in the door.
-
With the latch fully retracted (in the unlocked position), route the cable below the latch, and insert the tailpiece through the slot in the latch.
-
Secure the mounting plate with the supplied screws. Do not overtighten screws.
STEP 4: Install interior assembly
-
Push the battery cover out in the direction as illustrated.
- IMPORTANT: Do not load batteries until lock is completely installed.
-
Determine the door is right handed or left handed.
- Notes: If the direction of the slide switch is set incorrectly, it can be reset in DDLock App.
-
Right handed door
- Move the slide switch to “R”
- Turn the thumb turn to the Vertical position.
-
Left handed door
- Move the slide switch to “L”
- Turn the thumb turn to the Horizontal position.
-
Insert the cable connector to the socket. Push the connector in firmly until it is completely attached.
-
Attach Interior Assembly to Mounting Plate and tighten 3 Screws.
-
Insert 4 AA Alkaline batteries and put on the battery cover.
PROGRAMMING INSTRUCTIONS
At a Glance
How to Use
UNLOCK the door from outside
LOCK the door from outside
- Auto Lock Mode
- In Auto Lock mode, the bolt will extend out automatically in 5 seconds after unlocking.
- Manual Mode
- Press # on keypad for 2 seconds.
UNLOCK the door from inside
- Rotate the thumb turn to Unlock position.
LOCK the door from inside
- Auto Lock Mode
- In Auto Lock mode, the device will be locked automatically.
- Manual Mode
- Rotate the thumb turn to Lock Position.
Programming Basic
Definitions
- Auto Lock
- Automatically locks the deadbolt 5 seconds after unlocking. This feature is off by default. You can customize the Auto Lock time delay between 1 and 900 seconds.
- Key Unlock
- Key Unlock is always available when the batteries are completely dead or valid User Codes are forgotten.
- Low Battery Indicator
- If you hear 3 beeps along with 3 red light flashing after pressing any key to lock or unlock the door, that’s an alert for replacing batteries.
- Please replace with 4 brand new AA alkaline batteries and do not mix used and new batteries. All settings are stored in the lock while the batteries are removed and replaced.
- Wrong Entry Limit
- After 5 unsuccessful attempts at entering an invalid PIN code, the unit will shut down for 2 minutes.
- Silent Mode
- The beep sounds when pressing keypad can be muted. But you will still hear low battery and system alerts.
- Unlock with Fake code
- User can prevent pin code exposure from strangers by entering random digits before or after pin code. The total password length is within 16 digits.
Tuya APP USE GUIDE
HOW TO REGISTER
- STEP 1: Download “Tuya Smart” App in google Play or App Store
STEP 1
STEP 2
- Fill out this and then tap “Get Code”.
- You will be sent a verification code to verify your account !
- Once you receive it, tap on “Register”
Notes: The DDLock app is needed to use this lock. If this lock was professionally installed (or installed by someone other than the homeowner), make sure this step is performed by the homeowner.
Quick Set Up
IMPORTANT
- The default Master Code is 123456.
- It is required that you change it to a code of your own before programming.
Factory Default Settings
How to Reset?
- Press and hold the Reset button on the interior assembly by using the reset tool, stop holding until you hear a short beep and see 1 green light flash.
IMPORTANT: The reset button function must be turned on in the DDLock App before reseting.
Troubleshooting
- Q: Why the lock won’t accept any inputs after I entered a code or finger vein or card incorrectly for so many times?
- A: The lock will freeze for 90 seconds after 5 (finger vein is 10) unsuccessful attempts at entering an invalid code or fingerprint. You can unlock the lock via App or wait 90 seconds to continue.
- Q: How do I lock manually from outside?
- A: Press and hold # to lock the lock from outside.
- Q: The batteries are completely dead before I replase new batteries. How can I unlock the device?
- A: When the batteries are completely dead, the physical keys are available to unlock. Or you can connect a power bank to your lock for emergency power supply.
- Q: How do I share access of the lock to my family members?
- A: Go to Tuya App, click “Me” icon, then click the “Home Management” item. Follow the instruction in the App to continue.
- Q： Why are the actions for locking and unlocking executed in opposite directions?
- A： It is because there is an incorrect detection of the unlocking direction of the door lock. Remove the batteries, wait for 1 minute, and then reinstall them. The door lock will automatically detect and calibrate the correct unlocking direction.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.