SHARP HT-SB110 Sound Bar Speaker User Guide

: June 15, 2024
: Sharp

Table of Contents

HT-SB110 Sound Bar Speaker
First steps – initial setting
Remote control
Control devices
Bluetooth control
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Guide (short)
SHARP soundbar speaker HT-SB110 SHARP HT SB110 Sound Bar
Speaker Quick start guide
HT-SB110

HT-SB110 Sound Bar Speaker

Technoteka is an online destination for comparing prices and features of white goods, consumer electronics and IT devices at retail chains and online stores in Serbia.
Our site allows you to explore the latest information, detailed features and competitive product prices.
Visit us and enjoy an exclusive smart shopping experience by clicking on the link: https://tehnoteka.rs/p/sharp-soundbar-zvucnik-ht-sb110-akcija-cena/

BULGARIAN
Read all safety instructions before use the product. Full instructions can be downloaded from our web page sharpconsumer.eu.

First steps – initial setting

SHARP HT SB110 Sound Bar Speaker - Figure 1

Use the sockets (jacks) of the rear panel of the audio system for connecting to external devices audio and video signal sources, provided with the appropriate outputs (image 1).
Best quality of playback you can get when using digital sockets OPTICAL and HDMI.
Attention! Before connecting disconnect all devices from electrical network.
Turn the audio system on electrical network.
To activate the battery on the remote control, need to remove the safety coverage.
By pressing a button on the remote control you can to turn audio ON and OFF the system.
Press the button repeatedly on the remote control or buttons AUX, BT (Bluetooth), OPTICAL, HDMI ARC to choose desired mode.

Remote control

SHARP HT SB110 Sound Bar Speaker - Figure 2

– switch between modes ON and STANDBY MODE.
– selection of Bluetooth mode.
Press and hold this button for enable the pairing function while the device is in mode Bluetooth as well as to terminate the the pairing between existing paired Bluetooth devices.
– selection of playback function bringing
Volume +/- – increase/ decrease the volume.
– switch to pre- breath/next track in mode Bluetooth.
– play/pause/play refresh playback c Bluetooth mode.
Mute/ – switch off or turn on the sound.
BASS +/- – adjusting the levels of the low frequencies.
TRE +/- – regulation of the levels of the high frequencies.
EQ – selection of pre-programmed sound mode.

Control devices

SHARP HT SB110 Sound Bar Speaker - Figure 3

button
Used to switch between ON and STANDBY modes.
button
Used to select a function for playback.
button
Used to select the Bluetooth mode.
Press and hold this button to enable the function for pairing while the device is located in Bluetooth mode as well as for termination of pairing between existing paired devices with Bluetooth.
+/- buttons
They serve to increase and decrease volume.
LED indicators
• Red: The audio system is located in STANDBY MODE.
• Green: The audio system is located in AUXILIARY /AUX/ mode.
• Orange: The audio system is on located in OPTICAL mode.
• Blue: The audio system is located in Bluetooth mode.
• White: The audio system is located in HDMI ARC mode.

Bluetooth control

Pairing with Bluetooth devices
At the initial connection of the Bluetooth device with this player, is you need to pair them.

With the audio system on, press Bluetooth button on the remote control or on the main unit to select Bluetooth mode. The blue light indicator will flash.
Activate the device with Bluetooth and select search mode. In the list on the Bluetooth device will find “SHARP HT-SB110”.
In case you can’t find audio system, press and hold button on the remote control to make it visible.
You will hear a voice prompt “Pairing” /Pairing/ and the blue light indicator will start flashing accelerated.
Select “SHARP HT-SB110” in the list to pair. It will be voiced instruction “Paired” /Paired/ which means the audio system is successfully connected. The blue light indicator will start flashing without blinking.
You can now play music from the connected Bluetooth device.

This document was originally produced and published by the manufacturer, of the Sharp brand, and is downloaded from their official site. Considering this one fact, Technoteka points out that it does not take responsibility for the accuracy, completeness or reliability of information, data, opinions, advice or statements contained in this document.
Please note that Technoteka does not have the authority to make any changes or additions to this document, therefore we are not responsible for any errors, omissions or inaccuracies that may be found within it. Technotheque does not is responsible for damage caused to users when using incorrect data.
If you have additional questions about the product, please kindly ask contact the manufacturer directly to get all the details information.
For the latest information on price, available promotions and technical characteristics of the product mentioned in this document, please visit our site by clicking on the following link:
https://tehnoteka.rs/p/sharp-soundbar-zvucnik-ht-sb110-akcija-cena/

https://tehnoteka.rs