RENPHO R-D001R Foot and Calf Massager User Manual

**RENPHO R-D001R Foot and Calf Massager User Manual

**

Introduction

Thank you for choosing the RENPHO Foot and Calf Massager. Please use this product with the utmost care and safety in mind. To ensure safety and avoid any accidental damage or injury, please read this manual carefully and use the product only as indicated. Non-compliance may cause serious injuries, death and/or severe property damage.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance

DANGER – To reduce the risk of electric shock:

1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons

1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
2. Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
3. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
4. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacture
5. Never operate this appliance if it has a damaged cord or plug. If it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
6. Do not carry this appliance by supply cord or use cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. To disconnect, turn all controls to the off position, then remove the plug from the outlet.

WARNING : Do not stand on or in the appliance. Use only while seated

WARNING : Do not use a massager in close proximity to loose clothing or jewelry

WARNING : Keep long hair away from massager while in use WARNING : Temperatures sufficiently high to cause burns may occur regardless of the control setting. Do not use on an infant or invalid or on a sleeping or unconscious person. Do not use it on insensitive skin or on a person with poor blood circulation. Check the skin in contact with the heated area of the appliance frequently to reduce the risk of blistering.

WARNING : Do Not Crush – Avoid sharp folds.

DANGER : Never use pins or other metallic fasteners with this appliance

. DANGER : Carefully examine the covering before each use. Discard the appliance if the covering shows any sign of deterioration, such as checking, blistering, or cracking.

DANGER : Keep Dry – Do not operate in a wet or moist condition. For household use only. Do nondeers in water.

About the RENPHO Foot and Calf Massager

Specification

Model :  R-D001R
Input:   AC 100-240V 50/60Hz
Rated Power :  60W
Auto-off Timer :  15min/20min/30min
Product Size L584W395H246mm/2315.69.7 inches
Product Weight :  7.5kg/16.5lb

Package Included

1 X RENPHO Foot and Calf Massager
1 X Remote Control
1 X User Manual

**Overview

**

Button Introduction

Button Name

|

Function

---|---
Power| Power ON/OFF
Air Mode| Full feet(Default), Fore feet, Rear feet, OFF
Air Intensity| 1 (Default) / 2 / 3 / 4
Knead Intensity| L(Default) / M / H / OFF
Time (Auto-off)| 15min (Default) / 20min / 30min
Heat| Instep Bottom (Default), Instep, Bottom, OFF

Tips : Use your thumb to press buttons to get better touch sensitivity

Using the Product

Massage Postures

• Massage Feet

• Massage Calves

When massaging calves, it is recommended to turn on only the Air pressure or Kneading function, and start from the lowest intensity

• Massage Arms

We recommend you limit massaging to 15-30 minutes. Longer massage time may cause mild pain

Operation

1. Connect the plug to the power source. The Power indicator flashes White accompanied by a beep sound and the massager enters standby mode.
2. Press the Button to turn on the massager. Check the default Mode and Intensity in Buttotroduction chart.
3. Press the Button to switch the auto-off time among 15, 20, or 30 minutes. The timer will re-time each time you press the Time Button.
4. Press to turn ON/OFF the Mode function or select Full feet, Fore feet or Rear feet area.
5. Press Button to adjust the Air Intensity among 1/2/3/4
6. Press the Button to adjust the Knead Intensity among L/M/H/OFF.
7. Press the Button to turn ON/OFF the heating function or select Full (Bottom Instep), Instep or Bottom heating area

Note:

  *  **A** : Heating, Kneading and Air pressure function can work independently.
  *  **B:** Each press is accompanied by a beep sound and corresponding indicator light (When off, the LED goes out).
  *  **C** : If none of the Heating, Kneading and Air pressure function is working, the Time and Power button indicator lights are on, and the massager will enter the standby state if there is no further operation within 10 seconds.

8. The foot massager fits up to US Men’s size 14 (EU Men’s size 48.5 )
9. Removable mesh: Unzip to remove and clean

Product Care and Maintenance

1. The use of non-rated voltage is prohibited.
2. It is prohibited for non-professional personnel to repair the massager or replace parts.
3. Do not use or store the appliance in wet environments or high temperatures.
4. Unplug the power cord from the outlet after using.
5. Ensure that the operation of this product does not exceed more than 30 minutes at any given time.
6. If you feel unwell or in any unusual discomfort, please stop using the product immediately.
7. If a high temperature or foul odor is experienced while using the product, stop using immediately and unplug the device
8. Any Individual who may be pregnant or recently gave birth, has a heart condition or a pacemaker, suffers from diabetes or other sensory impairment, phlebitis and/or thrombosis, joint dysfunction, inflammation or injuries, weak bones, osteoporosis, a high fever, an abnormal or curved spine, is at an increased risk of developing blood clots, has pins/screws / artificial joints or other medical devices implanted in his / her body, is being treated for a medical condition or physical injury or is under a doctors care should consult with a medical professional before using a massaging device designed for home use.
9. Do not use sharp objects to handle the product in order to avoid damage.
10. Please keep the product clean. You can use soft cotton cloth and neutral detergent to clean it.
11. The product is a temperature-protection device; it will automatically shut-off when the temperature exceeds the safe limit.

Troubleshooting Guide

1. **** Disconnected power or loose plugcausing paracontact.
2. The power switches off or time is up.
3. The motor autos huts-off due to the device being on tooling activatingoverheatingprotection.

| 1. Re-plug to the powersource.2. Turn the power switchon again.3. Use the massagerafter the motor cools of naturally.
The massage intensity Is too high or too low|

1.  Your feet is positioned at the wrong angle.
2.  Did’ t choose intensity level which is right for you.

|

1. Adjust the contact angle to get moderate intensity.
2. The massager has 4intensity levels, choose the intensity you prefer. We recommend lowintensity to begin with.

No heating or insufficient heating|

1. The heating function isn’ t turned on.
2. The working heat area might be bottom, not full/Instep.
3. The product structure and working principle limits how fast the bottom can heat up. Therefore, the heating-up may seem a bit slow, wait a few minutes longer.
4. The ambient temperature or the internal temperature of the product is too high, the heating function will be turned off because of the over-heated protection.

|

1.  Press the “Heat” button. The white indicator light should turn on.
2. Choose the Full Heat area to get more sufficient heating.
3. It takes about a few minutes to fully heat up. Please be patient as this is to avoid the tempera- ture rising too fast.
4.  After the internal temperature drops, the heating function will be auto-turned on.

The touch panel is not working properly| 1.  Fingers are wet.2.   Insufficient touch area.|

1. Dry your fingers before touching the button.
2. Use your thumb to press buttons to get better touch sensitivity.

Warranty Policy

Your RENPHO product purchase is covered by a one-year limited manufacturer warranty from the date of delivery.

For warranty terms and conditions, please visit:https://renpho.com/pages /warranty-terms-andonditions

Note : Product registration is not required for the warranty. If you choose not to register your product, it will not diminish the product warranty

Customer Service

Please feel free to contact us if you have any questions or concerns. RENPHO Customer Service Team guarantees a quick response and hassle-free solutions to any issue you may have within business hours.

Tel : +44(0)7434-666088 (UK ONLY) Monday-Friday 9:00AM-5:00PM(GMT]

Email : support-eu@renpho.com(UK&EU)

For defective products or the return of items, please contact us with your order number within thepecified warranty period. DO NOT dispose of any product parts as they may be required for inspection/repair.

Notice

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

References

• Connection | Sugata & Freunde: Das Blog fürs Wesentliche
• Warranty Terms and Conditions – RENPHO US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>