tp-link TL-SX1008 8-Port 10G Desktop/Rackmount Switch User Guide

June 15, 2024
tp-link

Installation Guide
The image may differ from the actual product.

TL-SX1008 8-Port 10G Desktop/Rackmount Switch

For technical support, the user guide and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

Desktop Non-PoE Switch

tp-link TL-SX1008 8-Port 10G Desktop Rackmount Switch - Desktop Non-PoE
Switch

Desktop PoE Switch/Outdoor PoE Switch

tp-link TL-SX1008 8-Port 10G Desktop Rackmount Switch - Outdoor PoE
Switch

Note:

  1. PoE ports can also connect to non-PoE devices, but only transmit data.
  2. Reverse PoE switch is a passive PoE switch that gets power from PoE-in ports and supplies power to connected powered device(s) via PoE-out port(s) or DC port. DC port is a power output port, do not connect it to any power source.
  3. The switch with a PoE IN port does not support DC or AC power input. A PSE device needs to be connected to the PoE IN port to provide power for the switch.

Safety Information

  • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

  • Place the device with its bottom surface downward.
    For indoor switch:

  • Keep the device away from water, fire, humidity or hot environments.
    For outdoor switch:

  • Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
    For switch powered by power adapter:

  • Do not use damaged charger or USB cable to charge the device.

  • Do not use any other chargers than those recommended.

  • Adapter shall be installed near the equipment and shall be easily accessible.
    For switch powered by power cord:

  • Plug the product into the wall outlets with earthing connection through the power supply cord.

  • The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.

  • The socket-outlet shall be installed near the equipment and shall be easily accessible.
    For switch powered by USB or standard PoE:

  • This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

©2023 TP-Link 7106510471 REV2.0.0

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals