Whirlpool WWDC 8614 Washer Dryer User Guide

Whirlpool WWDC 8614 Washer Dryer

DAILY REFERENCE GUIDE

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. For even more complete user support, register your appliance at www.whirlpool.eu/register

• Download the Instructions for use from the website http://docs.whirlpool.eu
• Follow the procedure described on the last page.
• Please read the content of the Health & Safety and Installation Guides thoroughly before you use this appliance.
• The transit bolts must be removed before the appliance is used.
• See the Health & Safety and Installation Guides for detailed instructions on how to remove the transit bolts

PRODUCT DESCRIPTION

APPLIANCE

• 1. Top
• 2. Detergent dispenser
• 3. Control Panel
• 4. Lid handle
• 5. Door
• 6. Water filter – behind kick panel
• 7. Removable kick panel
• 8. Adjustable feet (2)

CONTROL PANEL

• 1. On/Off button
• 2. Programme selector
• 3. Start/Pause button
• 4. Temperature button
• 5. Colours 15°C button
• 6. Dry Only Button / Lock button
• 7. Drying settings button
• 8. Display
• 9. Start delay button
• 10. Spin speed button

DETERGENT DISPENSER

• Prewash Compartment Detergent for prewash
• Main Wash Compartment
  • Detergent for the main wash
  • Stain remover
  • Water softener
• Softener compartment
  • Softener
  • Liquid starch
• Pour softener or starch solution into the compartment without exceeding the “max” level.
• Release button
  (press to remove tray for cleaning).

Preferably use the partition A when washing with a liquid detergent for washing, to ensure that the correct quantity of detergent is used (the partition is included in the bag containing the instructions). Move the partition into slot B when using detergent powder.

FIRST TIME USE

See the section DAILY USE for instructions on selecting and starting a program.

FIRST CYCLE OPERATION

Remove any manufacturing debris:

1. Select the “Coton” program with a temperature setting of 90 °C.
2. Pour a small quantity of detergent powder into the main wash compartment of the detergent dispenser (maximum 1/3 of the quantity the detergent manufacturer recommends for lightly soiled laundry).
3. Start the program without loading the washer-dryer machine (with an empty drum).

DAILY USE

For more information on functions, a more detailed guide may be requested or downloaded from the website following the instructions given on the last page.

• LOADING LAUNDRY

  • Prepare the laundry, following the recommendations given in the section “HINTS AND TIPS”. – Open the door and load the laundry into the drum, without exceeding the maximum load capacities indicated in the Programme Chart.
  • Close the door, pressing until the latch audibly locks, and check that there is no laundry trapped between the door glass and the rubber seal.

• OPEN THE WATER TAP
  Check that the washer and dryer are connected correctly to the water mains. Open the water tap.

• SWITCHING ON THE WASHER-DRYER MACHINE
  Press the button ; the lamp flashes slowly.

• SELECTING A PROGRAMME AND CUSTOMISING A CYCLE.
  The following functions are possible with this appliance:

  • Wash only
  • Wash and dry
  • Dry only

Wash only

Select the required programme with the PROGRAMME selector dial. The duration of the wash cycle is shown on the display. The washer dryer machine automatically displays the maximum temperature and spin speed settings possible for the selected programme. Adjust the temperature and/or spin speed settings if needed with the relative buttons.

• Press button “Temp°” to cycle through progressively lower temperature settings until cold wash is set (“- -“) shown on display.
• Press button “Vitesse essorage” to cycle through progressively lower spin speed settings until the spin cycle is turned off (“0” shown on display).

Pressing the button again sets the highest possible setting.

Select the required options (if necessary).

• Press the button to select the option; the respective button lamp illuminates.
• Press the button again to cancel the option; the lamp extinguishes.
  • If the selected option is not compatible with the program set, an error warning tone sounds and the indicator lamp flashes three times. The option is not selected.

Wash and dry

To wash and dry a load with no interruption between the wash and dry cycles, make sure that the load does not exceed the maximum permissible drying load for the selected program (see the column “Max. load for drying cycle” in the Programme chart).

1. Follow the instructions given in the paragraph “Wash Only” to select and, if necessary, customize the required program.
2. Press “Paramètre de séchage” to select the required drying mode. Two drying modes are available: automatic or timer.

Automatic drying with selectable levels:

In automatic drying mode, the washer-dryer machine dries the laundry until the set level of dryness is reached. Pressing the button “Paramètre de séchage” once automatically selects the highest drying level available for the selected program. Press the button again to reduce the drying level.

The following levels are available:

• Wardrobe : The laundry is completely dry and ready to be put away in the wardrobe without ironing.
• Hanger : The laundry is left slightly damp to minimize creasing. Garments must be hung to air dry completely.
• Iron : garments are left reasonably damp to make ironing easier.

Timer drying mode:

Press the button “Paramètre de séchage” repeatedly to set the timer drying mode. After cycling through all the automatic drying levels, continue pressing the button “Paramètre de séchage” until the desired time is displayed. Values from 210 to 30 minutes are settable.

To wash a load of laundry larger than the maximum permissible load for drying (see the column “Max. load for drying cycle” in the Programme chart), remove a few garments once the washing cycle has finished before starting the drying cycle. Proceed as follows:

1. Follow the instructions given in the paragraph “Wash Only” to select and, if necessary, customize the required programme.
2. Do not include a drying cycle.
3. Once the washing cycle is finished, open the door and remove a few garments to reduce the load. Now follow the instructions for “Dry only”.

N.B.:

• Always allow a cooling down period after drying before opening the door.
• When using the two preset cycles “Lavage & Séchage 45’” and “Lavage & Séchage 90’”, it is not necessary to select and start a drying cycle.

Dry only

This function is used to simply dry a wet load washed previously in the washer and dryer or by hand.

1. Select a suitable program for the laundry you want to dry (e.g. select cotton to dry wet cotton laundry).
2. Press the button “Séchage seul” to dry without a wash cycle.
3. Press “Paramètre de séchage” to select the required drying mode. Two drying modes are available: automatic or timer.

Automatic drying with selectable levels:

In automatic drying mode, the washer-dryer machine dries the laundry until the set level of dryness is reached. Pressing the button “Paramètre de séchage” once automatically selects the highest drying level available for the selected program. Press the button again to reduce the drying level.

The following levels are available:

• Wardrobe : The laundry is completely dry and ready to be put away in the wardrobe without ironing.
• Hanger : The laundry is left slightly damp to minimize creasing. Garments must be hung to air dry completely.
• Iron : garments are left reasonably damp to make ironing easier.

Timer drying mode:

• Press the button “Paramètre de séchage” repeatedly to set the timer drying mode. After cycling through all the automatic drying levels, continue pressing the button “Paramètre de séchage” until the desired time is displayed.
• Values from 210 to 30 minutes are settable.
• N.B.: always allow a cooling down period after drying before opening the door.

USING THE CORRECT AMOUNT OF DETERGENT.

Pull out the tray and pour detergent into the relative compartments as described in the “Detergent dispenser”. This is only necessary when using a wash only or a wash + dry program.

DELAYING THE START OF A PROGRAMME.

To set a program to start at a later time, see the section “Options and Functions”.

STARTING A PROGRAMME.

• Press the START/PAUSE button. The relative indicator lamp illuminates, the door locks and the door open symbol extinguishes. To change a program while a cycle is in progress, press START/PAUSE to pause the washer dryer (the START/ PAUSE lamp flashes amber slowly); then select the required cycle and press
• START/PAUSE again. To open the door while a cycle is in progress, press START/PAUSE; the door may be opened if the symbol lights. Press the START/PAUSE button again to resume the program from where it was paused.

CANCELLING A RUNNING PROGRAMME (IF NECESSARY)

• Press and hold the button until the washer and dryer stops.
• If the water level and temperature are low enough, the door unlocks and may be opened.
• The door remains locked if there is water in the drum. To unlock the door, switch the washer and dryer on, select the ESSORAGE & VIDANGE program, and turn the spin function off by setting the spin speed to 0. The water is emptied and the door unlocks at the end of the program.

SWITCHING THE WASHER DRYER OFF AT THE END OF A PROGRAM.

• At the end of the cycle, the message “END” is shown on the display. The door can only be opened when the symbol lights. Check that the door unlocked symbol is lit, then open the door and take out the laundry.
• Press to switch the washer and dryer off. To save energy, if the washer and dryer is not switched off manually with the button, it turns off automatically approximately 30 minutes after the end of the program.
• Leave the door ajar to let the interior of the washer dryer dry.

HINTS AND TIPS

RULES FOR SEPARATING LAUNDRY

• Fabric type/indications on the label (cotton, mixed fibers, synthetic, wool, handwash items)
• Color (separate colored garments from whites, wash new colored items separately)
• Size (wash items of different sizes in the same load to improve washing efficacy and weight distribution in the drum)
• Delicates (place small items – such as nylon stockings – and garments with clasps – such as braziers – in a laundry bag or in a pillowcase with a zip).

EMPTY POCKETS

• Objects such as coins or safety pins can damage laundry and the washer-dryer drum.

WASH SYMBOLS

ON GARMENT LABELS

• The value given in the tub symbol is the maximum temperature possible for washing the garment.

CLEAN THE WATER FILTER REGULARLY

This is needed to prevent the filter from blocking and preventing the water from draining correctly. See the section “Cleaning and Maintenance” / “Cleaning the water filter” in the detailed guide that may be requested or downloaded from the website.

SAVING ENERGY AND PROTECTING THE ENVIRONMENT

• Keeping within the load limits indicated in the program chart will optimize energy, water, and detergent consumption and reduce washing times.
• Do not exceed the detergent quantities recommended by the detergent manufacturer.
• Save energy by using a 60°C instead of a 90°C wash programme, or by using a 40°C instead of a 60°C wash programme. We recommend using the “ Coton ” 60°C program for cotton garments, which is longer but uses less energy.
• To save energy and time when washing and drying, select the highest spin speed available for the program to reduce the residual water remaining in the garments at the end of the wash cycle.

PROGRAMME CHART

• Selectable/optional
• – Not selectable/applicable
• Required quantity
• Optional quantity

For wash programmes with temperatures above 50°C, we recommend using powder detergent rather than liquid and following the directions given on the detergent package.

• Select the ESSORAGE & VIDANGE programme and set the spin speed to 0 to empty only.

  • Test programme in compliance with standard EN 50229 (Wash): select the “ Coton ” programme with a temperature of 60°C.
  • Long cotton programme: set the “ Coton “ programme with a temperature of 40°C.

Test programme in compliance with standard EN 50229 (Drying): the greater load (6kg) must be dried by selecting the dryness level. The remainder of the load must be dried by selecting the dryness level: the load must consist of 2 sheets, 1 pillowcase and 1 hand towel.

The cycle duration indicated on the display or in the manual is an estimated time calculated for standard conditions. The actual cycle time may vary about several different factors, such as inlet water temperature and pressure, ambient temperature, quantity of detergent, size and type of load, load balancing, and any additional optional functions selected.

PROGRAMMES

Follow the directions indicated in the garment wash symbols.

• COTON (COTTON) for washing normally heavily soiled towels, underwear, table, and bed linen, etc. in resilient cotton and linen.
• SYNTHÉTIQUES (SYNTHETICS) for washing normally soiled garments made from synthetic fibers (such as polyester, polyacrylic, viscose, etc.) or cotton/ synthetic blends.
• RAPIDE 30’ (RAPID 30’) for washing lightly soiled garments quickly: this cycle lasts only 30 minutes, saving time and energy. Maximum load 3,5 Kg.
• RAFRAÎCHIR (STEAM REFRESH) for refreshing garments, neutralizing unpleasant odors and relaxing the fibers by delivering steam into the drum. The garments will be damp at the end of the cycle.
• LAVAGE & SÉCHAGE 45’ (WASH & DRY 45’) for washing and drying lightly soiled cotton and synthetic fiber garments quickly. This cycle washes and dries a laundry load of up to 1 Kg in just 45 minutes.
• LAVAGE & SÉCHAGE 90’ (WASH & DRY 90’) for washing and drying cotton and synthetic fiber garments quickly. This cycle washes and dries a laundry load of up to 2 Kg in just 90 minutes.
• ESSORAGE & VIDANGE (SPIN & DRAIN) spins the load and then empties the water. For resilient garments.
• RINÇAGE & ESSORAGE (RINSE & SPIN) rinses and then spins. For resilient garments.
• COTON 90°C+P (COTTON+PREWASH) for washing heavily soiled towels, underwear, table and bed linen, etc. in resilient cotton and linen where a prewash is required. Use only powder detergent in the “Main Wash Compartment”.
• COTON ( COTTON ) for washing normally soiled cotton garments. At 40°C and 60°C, this is the standard cotton programme and the most efficient and terms of water and energy consumption.

LAINE (WOOL) – Woolmark Apparel Care – Green: The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labeled as “hand wash” provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washer dryer. (M1318)

• DÉLICATS (DELICATES) for washing particularly delicate garments. Preferably turn garments inside out before washing.
• COULEURS ( COLOURS) for washing colored cotton garments. This programme is optimised to keep colours bright even after repeated washing.
• MIXTE (MIXED) for washing lightly to normally soiled resilient garments in cotton, linen, synthetic fibres and mixed fibers.

OPTIONS AND FUNCTIONS

OPTIONS selectable directly by pressing the relative button

If the selected option is not compatible with the programme set, an error warning tone sounds and the indicator lamp flashes three times. The option is not selected.

• COLOURS 15°
• • This option helps protect colors by washing in cold water (15°C). This option uses less energy to heat the water while still offering satisfactory wash results.
  • Suitable for lightly soiled, unstained garments, depending on the program selected previously.
  • Note: selecting this option together with the “MIXTE” program offers wash results comparable to a 40°C cycle at just 15°C.
• DÉPART DIFFÉRÉ (START DELAY)
• To set the selected program to start at a later time, press the button to set the desired delay time. The h. symbol lights on the display when this function is enabled. To cancel the delayed start, press the button again until the value “0” is shown on the display.
• LOCK BUTTON
• • to lock the control panel, press and hold the button “Séchage seul” for approximately 3 seconds. the symbol lights on the display to indicate that the control panel is locked (except the button). This prevents unintentional changes to programs,
  • especially with children near the machine.
  • If any attempt is made to use the control panel, the symbol flashes on the display.
  • To unlock the control panel, press and hold the button “Séchage seul” for approximately 3 seconds.

MAINTENANCE AND TROUBLESHOOTING GUIDE

See the Instructions for use for instructions on maintenance procedures and troubleshooting problems.

• TECHNICAL DOSSIER
  The technical dossier containing energy consumption figures may be downloaded from the Whirlpool website http://docs.whirlpool.eu

• CONTACTING THE AFTER-SALES SERVICE
  When contacting the After-Sales Service, you will need to be able to provide the codes indicated on the adhesive label on the inner side of the door. The telephone number is indicated in the warranty booklet.

HOW TO RECEIVE THE INSTRUCTIONS FOR USE

• Phone the After-Sales Service

• Use this QR Code

• Download the guide from the Whirlpool website: http://docs.whirlpool.eu

• To do this, you need to enter the correct commercial code of the product indicated on the adhesive label.

• Whirlpool® is a registered trademark of Whirlpool, USA.

• 1 9 5 1 3 6 9 1 1 . 0 1
  Printed in Italy

Frequently Asked Questions

What should I do before using the Whirlpool WWDC 8614 washer dryer for the first time?

Before using the appliance for the first time, ensure that you remove the transit bolts. Refer to the Health & Safety and Installation Guides for detailed instructions on how to remove these bolts.

How do I load laundry into the Whirlpool WWDC 8614 washer dryer?

Open the door and load the laundry into the drum, making sure not to exceed the maximum load capacities indicated in the Programme Chart. Close the door securely.

How do I start a washing or drying cycle?

Press the On/Off button to switch on the washer dryer. Select the desired program using the Programme selector dial, adjust settings if needed, and then press the Start/Pause button to begin the cycle.

Can I customize the wash or drying cycle in Whirlpool WWDC 8614?

Yes, you can customize the cycle by selecting the desired options such as temperature, spin speed, and drying mode. Press the respective buttons to set your preferences.

How do I use the delay start feature in Whirlpool WWDC 8614?

To delay the start of a program, press the Start delay button and set the desired delay time. The appliance will start the program at the specified time.

How can I save energy while using the Whirlpool WWDC 8614 washer dryer?

You can save energy by following load limits, using recommended detergent quantities, and choosing lower-temperature wash programs when suitable.

What do I do if I encounter issues with the Whirlpool WWDC 8614 washer dryer?

If you encounter any problems or require maintenance, refer to the Troubleshooting Guide in the user manual. You can also contact the Whirlpool After-Sales Service using the contact details provided in the warranty booklet.

What is the purpose of the Lock button on the control panel of Whirlpool WWDC 8614?

The Lock button is used to lock the control panel to prevent unintentional changes to programs, especially when there are children around. Press and hold the Lock button for about 3 seconds to activate or deactivate the control panel lock.

Can I open the door during a washing or drying cycle of Whirlpool WWDC 8614?

You can open the door during a cycle only if the door symbol on the display is illuminated, indicating that it's safe to do so. However, it's important to note that if the drum contains water, you may need to wait for a cooling down period after drying before opening the door.

How do I switch off the Whirlpool WWDC 8614 washer dryer at the end of a program?

At the end of a cycle, you can press the On/Off button to switch off the washer dryer. If the appliance is not manually switched off using the button, it will automatically turn off approximately 30 minutes after the end of the program to save energy.

What is the purpose of the Steam Refresh cycle in Whirlpool WWDC 8614?

The Steam Refresh cycle is designed to refresh garments, neutralize unpleasant odors, and relax the fibers by delivering steam into the drum. It's particularly useful for garments that need a quick refresh but don't require full washing.

How do I select the most energy-efficient wash program in Whirlpool WWDC 8614?

To select an energy-efficient wash program, consider using lower-temperature wash cycles, such as 60°C instead of 90°C or 40°C instead of 60°C. The Coton 60°C program for cotton garments is recommended for optimal results with lower energy consumption.

Download The PDF Link:Whirlpool WWDC 8614 Washer Dryer User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>