U-PROX Multiplexer Wired Alarm Integration Module User Guide

U-PROX Multiplexer Wired Alarm Integration Module

WIRED ALARM INTEGRATION MODULE

Is a part of the U-Prox security alarm system User manual Manufacturer: Integrated Technical Vision Ltd.U-Prox Multiplexer – is a wireless module designed to connect EN wired equpment (detectors, IR barriers, gas detectors, wired sirens etc) to wireless U-Prox control panel. Has power output, switched power output and built-in LiIon batteries to power backup. It is installed indoors.The device is connected to the control panel and is configured with the U-Prox Installer mobile application.

Functional parts of the device (see picture)

1.  Device case
2.  Light indicator
3.  Case back cover
4.  Сonduit for wires
5.  Locking screw
6.  Tamper case
7.  Upper part of the device, rear view
8. Connector
9. On/off button
10. Battery compartment
11.  Bottom plate of device
12. Tamper switch
13. Bottom plate connector
14. Power supply connector

TECHNICAL SPECIFICATIONS

COMPLETE SET

1.  U-Prox Multiplexer;
2.  Two 18650 batteries (pre-installed);
3.  Quick start guide

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS

WARRANTY
Warranty for U-Prox devices (except batteries) is valid for two years after the purchase date. If the device operates incorrectly, please contact [email protected] at first, maybe it can be solved remotely.

REGISTRATION

INSTRANGE TEALLA ST FTION LOR OPOCATIONTIMAL

Due to Grade 2 requirement RF link works with reduction of power in 8 dB

INDICATION IN RANGE

INSTALLATION

INDICATION

LED CONNECTION

SENSORS CONNECTION

adjustable alarm sign (NO or NC) for each input

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>