Rimoody Android 10.0 Car Stereo Autoradio 1 Din 7 Inch Single Din Touch Screen Car Radio Instructions
- June 15, 2024
- Rimoody
Table of Contents
- Retractable Screen Single Din Android Car Stereo instruction
- (Picture for reference only)
- [Customer]
- [Instructions for use]
- 1. Tips and warnings
- 2. Safety Tips
- 3. Machine Reset
- [Installation]
- [Wiring]
- 1. Product Dimension
- 2. Back interface diagram
- 3. Harness
- 4. Installation Steps
- 5. Schematic diagram of reversing camera wiring
- 6. Fixed machine
- 7. Specifics
- [Introduction to basic functions]
- [Main functions and usage]
- 7.Common troubleshooting wizard
- Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Retractable Screen Single Din Android Car Stereo instruction
(Picture for reference only)
Customer Service Contact:
yanningqiu2021@163.com
[Customer]
Dear Customer:
Thanks for buy our car player, it is our honor and pleasure to server you to
using our product. Before using this product, please read this manual very
carefully and keep it properly. Your kindly feedback and support will prompt
us to do the better. Thank you.
[Instructions for use]
For the sake of your safety, please don’t watch the video while driving and operating a machine; Please dispatch the volume to clearly while driving to the voice to the outside world. Before operation, please read this manual and other manual system, understand the use of manual and machine related safety tips and warning signs, after reading in a readily accessible place for ready reference.
- Pay attention to traffic safety in the first place.
- If you meet difficulty in operating the system, please again after he parked his car in a safe place.
- Don’t let children operate this machine, lest cause personal injury and damage to the machine.
- Please follow the traffic rules when using satellite navigation function to drive.
- Please do not ban the use of electronic equipment or it is forbidden to use open flame such as gas stations, brewery, strong electromagnetic interference region, otherwise may cause danger.
- Don’t maintenance, installation of the machine itself. Under the condition of the plug do not install or repair the machine, by not trained in electronic equipment or vehicles accessories installation personnel or the lack of experience installation and maintenance of this machine is very dangerous.
- Do not install the machine storage or in direct sunlight place, don’t put it in other harmful material environment, especially the LCD screen, if the installation of the LCD screen is in the air conditioner near the air duct, please keep cool and hot air blows directly to the machine, otherwise it may damage the machine, even on the bus or personal injury.
- Please do not use some sharp objects painted screen, don’t use hard objects to press the screen, otherwise will cause damage to display or touch screen.
- In order to guarantee the normal operation of the machine, and prevent the occurrence of fire or get an electric shock, please don’t expose machine in damp air, more can’t liquid drying machine.
1. Tips and warnings
In order to emphasize the important information in the user manual, please pay special attention to the label when you see. It indicates some important warning and prompt information.
2. Safety Tips
Please read all instructions before installation, and it is recommended that car audio professionals install the machine.
This machine is suitable for vehicle-mounted 12V power supply system (there
must be a grounding wire), please do not install this machine in a 24V
vehicle-mounted, otherwise it will damage the machine.
Do not repair the power fuse without professional guidance. Improper use of
the fuse will cause damage to the machine and cause a fire.
In order to avoid violating traffic rules, drivers cannot watch videos while
driving and operating machines to avoid unnecessary accidents.
For safety and to ensure the normal use of the product, please invite
professionals to install, disassemble or repair the machine to avoid damage to
the machine and accidents. For more information, please contact your local
professional car audio store.
Please avoid putting this product in humid environment and water to avoid fire
caused by electric shock or other unnecessary damage.
Note: To prevent short circuit, please remember to turn off the car and disconnect the ACC connected to B+ before installation.
3. Machine Reset
- The first use of the system before or after the replacement battery, the machine must be reset.
- When the machine function is not normal, the machine must be reset.
- Click restore factory settings in system settings interface, make the machine is in the initial state.
- Use a pointed object, press the RESET button on the panel, or click the system RESET in the system settings, the machine will be RESET to turn it off, back to the factory the initial state.
Note: press the RESET button and the system initialization will lose time and set the value before.
[Installation]
The unit installs for security, pls install it refer to the following diagram description:
- Pls make the unit in proper place, connect the unit refer to the diagram, and test it works well or not.
- Pls wrapped the connection line with insulation tape to ensure complete wiring after testing well.
- Pls bend the hook of metal 1, and insert the metal to instrument panel then fixed it.
- Put the unit into metal hook until it lock.
Remove
Note:
- Pls ensure install the unit in the position that doesn’t interfere with the normal operations of driver, and no harm for emergency braking.
- For exactly install, pls use the accessories provided by the unit only, otherwise it will cause unnecessary damages. If more holes or other changes in facing or structures are needed, pls contact with dealer nearby.
- Installed after the first power test please press the reset button, then press the clock button to set the clock, the unit can be used normally.
Dismantling:
The unit without key, you can pull out by your hand.
[Wiring]
1. Product Dimension
-
TF
-
USB
-
DISP
-
AUX
-
NAVI
-
MENU
-
Open
Close -
RES
-
MIC
-
Next song
-
Volume
-
Previous song
2. Back interface diagram
(1) MIC
(2) CVBS IN 1
(3) VIDEO OUT
(4) SUB WOOFER
(5) VIDEO IN
(6) AUX R IN
(7) AUX L IN
(8) AUDIO OUT R
(9) AUDIO OUT L
(10) AMP CONT
a) GPS Antenna
b) Radio Antenna
c) Rear Camera Input Cable
d) USB Cable
e) RCA Cable
f) Power cable
3. Harness
[RCA Cable Definition]
- USB 1 (Some front, some rear)
- USB 2(Rear)
- USB Cable
- Driving Recorder
- VIDEO OUT
- AUX R IN
- AUX L IN
- AUX R OUT
- AUX L OUT
- CAMERA
- VIDEO IN -1
- VIDEO IN -2
- Blue
- Video Signal Output
- Audio Right Input
- Audio Left Input
- Audio Right Output
- Audio Left Output
- Camera Signal Input
- Video Signal Input 1
- Video Signal Input 2
- AMP Control
- GPS Antenna
- RADIO Antenna
[Power Cable Definition]
- Orange
- Orange/black
- Brown
- Brown/ black
- ILL(illumination)
- KEY2(Steering wheel control line)
- BACK( Reversing)
- KEY1(Steering wheel control line)
- Green
- Green/black
- White
- White/black
- Gray
- Gray/black
- Purple
- Purple/black
- Red
- Black
- Blue
- Yellow
- Rear Left Speaker+
- Rear Left Speaker-
- Front Left Speaker+
- Front Left Speaker-
- Front Right Speaker+
- Front Right Speaker-
- Rear Right Speaker+
- Rear Right Speaker-
- ACC (Ignition Switch +12V)
- GND (Ground wire B-)
- ANT (Auto Antenna Power)
- B+ (Power Supply +12V)
Manual stretch
4. Installation Steps
Picture 1 Picture 2 Picture 3
1 >How to find the power cord of the car?
First turn the car key to the ACC state. Then regulate the Universal Watch to the 20V gear. Connect the black stylus to the power ground (the outer ironclad of the cigar lighter) and use the red stylus to test each wire of the car. Normally a car has two wires about 12V(some cars only have one). That is the positive pole line. How to distinguish the ACC and memory line? Pull out the car key after you find the two positive pole lines. The memory line is the electrically charged one after you nu plug the key. *(Look the Picture 1)
2 >How to find the ground wire of the car (negative pole)?
Turn the Universal Watch to the on/off beep gear. Then connect the black stylus to the power ground (the outer ironclad of the cigar lighter) and use the red stylus to test each wire except the two power lines. The energized one is the ground wire(negative pole). Some cars have two ground wires. *(Look the Picture 2)
3 >How to find the horn line of the car?
Turn the Universal Watch to the on/off beep gear. Connect the black stylus to any wire except the power cord and ground wire. Then use the red stylus to test each remaining wire. The energized one is the horn wire. Then use the same method to find out the other horn lines. *(Look the Picture 3)
4 >How to test whether the unit work properly?
When you get the unit, you’d better test the unit with battery or power supply before installation. Wire connection method: Twist the red wire and yellow wire together and then connect them to the positive pole. Connect the black wire to the negative pole. Then press the switch to turn on the unit and get a horn to connect to the horn wire. (Two wires connected to the horn are of the same color. The white wire is supposed to be connected to the positive pole and the white one with black part connected to the negative pole of the horn. You can make no distinction between the positive and negative poles of the horn.) Then test the function of the unit.
5 >How to connect Bluetooth?
Turn on the unit and initiate Bluetooth function of phone, and then search for the user name of the unit. Click the connect button and the phone will show it is connected. If you want to play music with Bluetooth, press the function transition button to switch to Bluetooth mode and then click songs on your phone. You can also dial numbers on your phone to make a phone call with Bluetooth.
6 >How to fix the unit ?
Since each car has a different way of fixing the unit and the location of the screws are different, there is no defined way to fix the unit. You may consult the fixing method of the original unit. If it was fixed by tightening screws with the steel angle, you can unload the steel angle of the original unit to both sides of our unit, then use the electrician tape to tight the steel angle (since screw hole size is probably unmatched). If the original unit was fixed with iron frame, you can fix the iron frame of our unit in the car first, and then push the unit to fasten it. If the size is not fit, you can wrap the unit with electrician tape to increase the volume of the unit, and then put it in and fasten it. Or you can think of a better way to fix it, but anyway, you can fix it.
7 >How to install the navigation antenna?
First you should tighten the screws of the navigation antenna and the unit. Then you must fix the navigation antenna module in a place that has sunlight or on the windshield. (That’s very important because poor installation will affect navigation signals.)
8 >The default factory mode password
Factory mode password: 8888. (Different products, the password may be different)
9 >The default Bluetooth Pin Code
Bluetooth Pin Code : 0000/1234
5. Schematic diagram of reversing camera wiring
There is a separately Camera Input, please do not connect to RCA cable.
Here’s the complete steps of camera wiring.
1. Camera power cable: red and black.
— Red connection to reverse the positive light, black to reverse the negative
light.
2. Camera Extension Cable: yellow port.
—- Insert the extension cable of the camera to the radio rear port “CAMERA”
3. Trigger Cable
There are two short red trigger cables on the camera’s Extension Cable.
3.1 one near the radio — connects to the power cable (brown/pink wire with
label “BACK”)
3.2 another near the camera — connects to car’s rear light positive.
When you pull the rear gear, the device will automatically display the rear
view image.
- Monitor (Not Included in the Package)
- Camera Power Source
- Camera (Optional)
SCHEMATIC DIAGRAM OF REVERSING CAMERA WIRING
- Red: Connect to the positive pole of the upside down lamp.
- Black: Connect to the power negative pole.
- Connect to CAM IN.
- Red: Pink line attached to the tail line of the machine ( BACK – reversing detection line).
- Red: Connect to the positive pole of the upside down lamp.
- Rear Camera (selective)
Wiring method:
Preparation tools: tape, screwdriver, wire cutters, plastic prying tool,
traction wire.
Step 1: Insert the original accessory camera wire harness into the rear
license plate light hole, and then directly snap it in.
Step 2: Step 2: Remove the trunk lining, pull out the waterproof rubber ring,
use the tow line to pull the camera cable out of the suitcase, insert the
camera wire harness and data connector into the hole of the baffle, and
finally rein stall the waterproof rubber ring.
Step 3: Remove the decorative lining board on the left side of the trunk, plug
the data power integrated extension cable with the camera harness, and lead
out from the rear trim panel along the original car harness.
Step 4: Peel off the sealing strip on the left side door of the rear seat,
route the cable into the rear cockpit, and pull out the data power integrated
plug and the remaining extension cords.
Step 5: Recover the trunk, and insert the extension cord into the gap of the
plastic panel along the rubber strip on the door side, all the way to the
cockpit door.
Step 6: Remove the storage box under the headlights, pass through the top of
the OBD interface, and then connect the wiring interface to the navigator
interface.
6. Fixed machine
- Fix the bracket on the left and right sides of the machine with screws, and adjust the position of the bracket according to the actual installation.
- Screw the machine in the mounting position of the central console of the car.
Put the mounting sleeve into the dashboard.
| Band the tabs of the mounting sleeve (1) outward into the dashboard for a secure mounting.
---|---
If necessary. use the strap (6) to secure the back of the unit in place.
The strap (61 can be bent by hand to the desired angle.
a) To remove the unit. insert the release keys (2) on both sides of the unit and then pull the unit out from the dashboard.
7. Specifics
Voltage: DC 12V
System: Android 10.0
Size: 7 Inch Capacitive screen
Bluetooth: Bluetooth 4.0
Resolution: 1024*600
Memory: 1G+16G
Audio format: MP3/WMA/WA/OGG/FLAC/APE
Video format: RM/RMVB/MP4/FLV/MKV/3GP/AVIASF/SWFMP1
Image format: JPG
FM Range: FM 87.5~108MHz
Factory password: 8888
Language: Chinese, English, Arabic, Brazilian, Russian, Hebrew, Spanish,
Italian, French, Thai, German, Japanese, Korean, Turkish, Czech, Iranian,
Hungarian, Dutch, Polish, Swedish, Ukrainian
[Introduction to basic functions]
[Main interface]
[Icon Introduction]
1. Machine-Host
Symbol
| Operations & Controls
---|---
MIC|
Built-in microphone hole
RST
| Reset (press with a sharp object)
|
Power on the device
Press and hold for 3 seconds to power off the device Short press repeatedly to
mute or unmute
|
To main menu
|
Return to the previous interface
|
Press or hold repeatedly to increase volume
|
Press or hold repeatedly to decrease volume
2.On screen – APP Icon
Icon
| Name| Operations
---|---|---
| HERE WeGo|
Touch to enter offline map
|
PODOFO Voice
| Touch to enter Smart Voice to set up
| PODOFO+|
Touch to enter Smart Voice software
|
| Touch to go to Google
| DAB+|
Touch to enter DAB+
|
Car Settings
| Touch to enter settings, enter password 8888 for factory settings
| Maps|
Touch to enter google map online
3.On screen – Drop-down list
Icon
| Name| Operations
---|---|---
| Wi-Fi|
Turn on/off Wi-Fi
|
Bluetooth
| Turn on/off Bluetooth
| Screen off|
Open/Close Screen
|
Car Amplifier
| Turn on/off Car Amplifier
| Screenshot|
Touch to take a screenshot
|
Car setting
| Touch to enterCar setting
| Clean-up|
Touch to clean
|
Video out
|
Touch to set Video out
[Main functions and usage]
EXPEX
1.Music player
-
Intelligent navigation
-
Click on the “Intelligent Navigation” icon to enter the navigation state
In the navigation state. only GPS navigation-related functions can be performed on the screen. If you need to do anything else, you need to exit the navigation first.
Navigation music function
In the network music / super CD/ local music / world broadcast / local radio / Bluetooth music state switch to GPS navigation. can normally enjoy the original state of music, when there is a navigation prompt, the system will automatically switch to navigation voice prompt state. -
Function operation
-
This machine has the function of touching handwritten input destination query. please refer to the operation help of navigation interface for the operation of navigation function.
-
Local music
-
Click the “Local Music” icon to enter the local music playback interface (this machine must have a SD card or USB port and corresponding media files) Touch icon description
-
: On the music list, you can play songs that you like to choose from different styles : Loop play mode switch
-
: previous / next : Pause / play : Sound effect setting : Return to the previous menu
-
: Back to the main interface
2. Video player
- Click the “Video” icon to enter the video list interface (this machine must have a SD card or USB port and corresponding media files)
- Click on the video and enter the video play interface
- Touch icon description
- : Back to the main interface
- : Return to the previous menu
- : Pause / play : Previous / next
- : Sound effect setting : Video scale
3. Radio
- Local radio
- Click the “local radio” icon to enter the local radio interface
- Touch icon description
- : Back to the main interface : Return to the previous menu
- : Up / down search station, any radio station be searched the searching will stop
- : To the left / to the right : FM switch : Save station
: Press this icon to select ST/LOC options.
: Users can save his favorite radio frequency here. Press the relative column for 3 seconds, the current radio frequency is saved in this place.
4. Bluetooth
- Bluetooth
- Click on the “Bluetooth” icon to enter the Bluetooth interface
- Touch icon description
- : Bluetooth Settings : Bluetooth connect : Bluetooth Music : Bluetooth call record
- : Bluetooth Phonebook : Bluetooth dial keyboard
5. Bluetooth Music
- Bluetooth Music
- Touch icon description
- : Previous song : Next song : Bluetooth Music play
6. Car audio settings
- Audio setting
- EQ setting.
- : Adjust up and down
- : Sound field setting
- : Drag to adjust the sound field
- : EQ Settings
- : Default Settings
- : Up : Down
- : Left : right
7. Steering wheel control studying
Please press and hold a button of the steering wheel button and click the corresponding icon
Please follow below steps to connect the wires:
- Find your car steering wheel control button signal wires, it is normally located under your driving wheel.
- The signals have two, one gives “+” voltage and another gives GND voltage.
- Check our unit power cable, there is a wire labeled “key1″ or ” key1″
- Connect the “+” Voltage wires to the “key1” or “key1” wires.
- Connect the GND wire to GND wires of our unit.
- Go to the this option to learn the steering wheel control function.
- Press the relative function icon on the unit.
- Press your steering wheel control button and there will be a voltage on our unit to memory.
- Step by step to finalize all the buttons.
5. Mirror Link Feature for smartphone.
Use the APP named “TIMA” for the smartphone mirror link features.
After you open the APP, you will go to the selection page according to your smart phone type.
Please follow the steps in the APP according to the instruction displayed.
6. Car Setting:
This APP is special designed for Car Android Device
6.2 System Info:
Users can check the unit system information here
(The above information is for reference only and is based on actual
configuration).
6.3 Factory Settings
Users can change the unit presettings here. We do not recommend users to change any settings here as it may result unrecoverable damages to the unit (Password: 8888)
6.4 Car Settings:
If users want to use the CANBUS to decode the car system do have the original steering wheel control, air conditioner etc, please contact with the sellers to buy the suitable CANBUS Decoding Box and make relative changes.
6.5 Android Settings
Users Press the “Go to settings” here to go to the android setting mode.
6.6 GPS Detection:
If users can not get the position in the navigation software, users can go here to check the hardware performance. If users can not find the GPS signal, please check if the GPS antenna is placed in the right way, make sure the receiver side is up, the side with stickers is down.
6.7 Volume Settings
Users can adjust the volume ratio in different mode here.
6.8 Brightness
Users can change the brightness of the screen here.
6.9 Navigation
Users can select the relative navigation software as his preset one
6.12 Other Settings
Float Bar: press this feature on to have the assistive touch point
display on the screen all the time
Handbrake: press this on, then the device will not allow to watch video
during driving due to safety reason
Screen Setting: This setting will force the screen in the Horizontal
screen mode
Revers Settings: if you need to have the sound of the unit when you are
reversing the car and enter into reverse camera mode, please click it on
6.13 Offline Map–HERE WeGo
(Note: You can also use Google Maps online)
In order to use the offline feature of your device, follow the steps below to
set it up.
1. Power on the device and connect the device to the internet via Wifi.
2. Find the APP named HERE WeGo in the main menu.
3. Follow the APP prompts to enter the main map page and find the options menu.
4.Click “Use the app offline” and download your favorite map data in the country list.
5.Click “Use the app offline” and download your favorite map data in the country list.
6.14 Supported Additional Devices
(Note: Additional devices are not included in the product and accessories, you need to purchase additionally!)
Icon
| Name| Connection Way
---|---|---
| External Microphone|
RCA MIC Interface
|
DAB+
| USB
| DVR|
USB
|
OBD
| Bluetooth
| Subwoofer|
RCA audio output or subwoofer interface
|
Amplifier
| RCA audio output interface
| Video Output|
USB
|
U disk
|
USB
Thank you again for using our product. If you have further questions, please contact our customer service staff. Product UI interface or functions may be modified and upgraded from time to time without notice. It is normal if the manual has some discrepancies!
7.Common troubleshooting wizard
If you encounter the following problems in use, troubleshooting will help you quickly solve the problem, if the problem is still not resolved, it is recommended to contact our service department to help solve.
Phenomenon
| Reason| Handle
---|---|---
Can not boot| The car key is not inserted into the switch and the switch is
not open|
Insert the vehicle key and open the door
Power line insertion host
| Insert power cord
May be the fuse of this machine is burned|
Replace fuses with the same rated current
Touch screen is not allowed
| Please press 5 fingers on the main page of the unit for 20seconds. Users
will go to the screen/touch button calibrate page automatically
Touch screen does not respond|
System is dealing with transactions (road search, etc.), a moment, if the system is not working, you can try to reset it, if still can not be resolved, it is recommended to contact our service department to help solve
The back light of the button is not working
| Please check if the wire labeled “ILL” is connected to the front lamp wire.
When the front lamp is on, the unit back light will be on automatically. Users
can also connect this ILL wire to continues +12V to keep the button light on
always.
Without reversing visual image| No camera installed|
Install the camera, insert the CCD plug of the host
Camera standard is wrong
| Replace camera with matching system
The system is not started, rearview image reversing the process, the key is
invalid| The driving safety of the emphasis on the principle of product
design, the car after the preset priority|
Must terminate the reverse action, in order to press the original car power button to start the system boot
GPS cannot locate
| GPS antenna not inserted | Insert GPS antenna
May be in a number of GPS signal shielding area|
Test the car out of a distance, to observe whether the recovery of GPS signal, if not restored, please contact the service department
Boot can not locate and navigate
| Navigation map blind, some remote mountain or road has not been established
in the local area| Please contact the after-sales service department to
confirm the updated map
Fuzzy search can not find the place to go|
First confirm whether the input is correct, and then try to enter the location of another name, if you can not find, it may not be in our database, It is recommended to connect WiFi to use online maps.
The navigation system to the selected road detour
| Navigation system in the road search will consider various factors, in
addition to the distance will consider the level of road, traffic rules,
viaduct, trunk, etc., in short, to facilitate the drivers in the shortest
possible time to reach the destination.
A blank on the map|
It may be too large or too small for navigation scale. Try to change scale size to see if you can restore the map display. If it is not resolved, Maybe map data is lost, It is recommended to connect WiFi to use online map.
Thank you for your time.
Documents / Resources
|
Rimoody Android 10.0 Car Stereo Autoradio 1 Din 7 Inch Single Din Touch
Screen Car
Radio
[pdf] Instructions
Android 10.0 Car Stereo Autoradio 1 Din 7 Inch Single Din Touch Screen Car
Radio, Android 10.0, Car Stereo Autoradio 1 Din 7 Inch Single Din Touch Screen
Car Radio, 7 Inch Single Din Touch Screen Car Radio, Touch Screen Car Radio,
Screen Car Radio, Car Radio
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>