Nous P3 Smart Wi-Fi Bulb Instruction Manual
- June 15, 2024
- NOUS
Table of Contents
Nous P3 Smart Wi-Fi Bulb
You will need Nous Smart Home App. Scan the QR code or download it from direct link
Register with your mobile number/E-mail then login
- Launch the app “Nous Smart Home”.
- Create a new account or log in to your existing account.
- Tap “+” to add the device
- Select “Smart Bulb” from the list of products.
- Switch on the power.
- If the light does not flash: Switch the power to off – on – off – on – off – on. If the light flashes:
- Confirm in the app.
- Confirm the Wi-Fi network and password.
- Enter the device name.
Note: The device name will also be used by Amazon Alexa and Google Home
Using Amazon Echo Quick Guide
- What You’ll Need…
- Amazon Alexa APP & Account
- NOUS Smart Home APP & Account (Users need to register their account and select the region as “The
- United States”)
- Echo, Echo Dot, Tap or other Amazon voice-operated devices.
Tip: Rename the device after configuring it successfully, The name of the device is recommended to use easy pronunciation of the English words. (Amazon Echo only supports English temporarily)
Set Your Echo Speaker by Alexa APP
- Sign in with Alexa account & password (If not registered,
- sign up first); After log in, click the menu at the top left, then
- click “Settings”, and choose “Set up a new device”;
- Choose a device (for example, Echo). When the right page appears, long press the small dot on your Echo device until the light turns yellow.
- Then click “Continue” on the App.
- Choose the user’s WIFI and wait for a few minutes.
- After an introduction video, click next step, it will turn to
- “Home” page automatically. Now the Echo is connected to
- Alexa APP through WiFi successfully.
Enable Our Skill in the Alexa APP
- Choose “Skills” in the options bar, and then search
- “NOUS Smart Home” in the search bar; Select “NOUS
- Smart Home” in the search results, and then click “Enable”.
- Input the user name and password that you had previously registered (Only support the account in the United States); When you see the right page, it means the Alexa account is linked with the NOUS Smart Home account.
Control device by Voice
After the previous operation, you can control the device via Echo.
-
Discovering devices: First, users need to say to Echo: “Echo(or Alexa), Discover my devices.”
Echo will start to find the devices which is added to the NOUS Smart Home APP, it will take about 20 seconds to show the result. Or you may click “Discover devices” in the Alexa APP, it will show the devices that were found successfully.
Note: “Echo” is one of the wake-up names, which can be any of these three names (Settings): Alexa/Echo/Amazon.- Support Skill List
- Users can control devices by instructions like the below:
- Alexa, turn on [device]
- Alexa, turn off [device]
-
Attention: The name of the device must be consistent with the addition of the NOUS Smart Home APP.
This translation may be inaccurate because it was made with Google Translate service
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>