JOLI NOUS Ring Sling Little Baby Wrap User Manual
- June 5, 2024
- JOLI NOUS
Table of Contents
JOLI NOUS Ring Sling Little Baby Wrap User Manual
By using a Ring Sling Joli Nous, you certify that you have read, understood and fully accepted the « General Terms and Conditions of Use and Sale » available on the website: jolinous.ch. For more information, please visit our website: jolinous.ch
Ring Sling
Scan QR code with your phone to watch the instruction video.
Checklist
- I read the instructions carefully before using the Ring Sling.
- I wash the Ring Sling before the first use (max. 40°).
- The rings are always between my chest and my shoulder.
- Baby’s head is close enough to kiss.
- The child’s head should always be outside the fabric. The child’s airways are clear.
- Fabric forming the deep seat. The child’s knees are higher than his/her buttocks and hips.
- The fabric on the child’s back has no folds and is well stretched.
- I hold the child during all manipulations of the Ring Sling.
- If necessary, I contact a baby wearing instructor to help me.
How to put on a Ring Sling
CONGRATULATIONS! You have decided to carry your child!
The physical and psychological benefits of babywearing are numerous for
both the child and the adult.
It is practical and comfortable. It allows close, reassuring and
comforting contact for the child, thus promoting well-being and rest.
The closeness, the gaze, the caresses reinforce the bond of attachment,
thanks to a natural stimulation of oxytocin production (the attachment
hormone). Babywearing facilitates digestion and the evacuation of gas
from the child’s digestive system, while reducing reflux problems. It
allows freedom of movement and action for the adult during daily
activities. It also may help mothers to succeed with breastfeeding.
- Hold the rings between your shoulder and your chest with one hand. It does not matter which shoulder the rings are on. The fabric is draped flat across your back (it is also possible to do a 180° twist to carry newborn). Then grab the top rail of the fabric with the other hand (shown in pink).
- Pass the fabric through both rings.
- Make sure that the fabric is not twisted. Separate the rings.
- Pass the fabric through the upper ring.
- Ensure the fabric is spread out smoothly through the rings with both ends of the rail on each side.
- Place one arm through the Ring Sling to provide a seat for your baby. The 2 rings are high on your shoulder (because they will move down a little during adjusting the Ring Sling).
- Bring your baby upto your shoulder (opposite the rings) supported safety with your hands. Grab his feet from under the fabric and gently slide him into the Ring Sling. Allow your baby’s bottom to sit in the bottom of pouch. Knees should be higher then their bottom.
- The child’s physiological position is the « frog » position. The seat is deep. Fabric forming the seat stretches from knee to knee. The child’s knees are higher than his/her buttocks and hips. The back is rounded. The natural hip/knee/ankle axis is respected.
- Grab the top rail of the fabric and unfold it over the child’s back. The excess fabric is under the child’s bottom.
- The fabric on the child’s back is well stretched and pulled up to the back of the neck.
- Start to adjust and tighten the Ring Sling with the top rail. Tighten the fabric “horizontally ” (towards the child) across the entire width (from top to bottom rail, every 5 centimeters) so that the Ring Sling is tightly stretched over the child’s back.
- The child is correctly positioned!
To take out the child from the Ring Sling, hold him on you. Release the fabric tension by lifting the top ring. Once the fabric has slackened, remove the Ring Sling over your child’s head.