nous E7 Wireless Gateway Hub Instruction Manual
- June 15, 2024
- NOUS
Table of Contents
INSTRUCTION MANUAL
Wireless Gateway/Hub E7
You will need Nous Smart Home App. Scan the QR code or download it from direct link
https://a.smart321.com/noussmart
Know about the Smart Gateway
This smart gateway, adopting super low power consumption Zigbee technology, can work with kinds of smart sensors and smart home appliances to build a smart home system and the gateway works as the central controller.
System LED
Red: Power on and it is not connected with router
Blue: Power on and it is connected with router
Blink (red/blue): Power on and it is not transmiting data with router
Pairing LED
OFF: The gateway hasn’t been paired with router
ON: The gateway has been paired with router
Blink: The gateway is in pairing mode with its sub-device
Power supply
USB 5V(Type-C)
Ethernet port
Connect to router with LAN cable
Button
Long press: Press and hold the button for 5 seconds the gateway enters pairing
mode with router
Short press: The gateway enters adding sub-device mode
Quick Installation Guide
-
(If you have installed the NOUS Smart Home on your mobile phone, please go to step 3) Scan QR code or search NOUS Smart Home in APP Store or Google Play to install APP(new user must register account first)
-
Connect mobile phone to your 2.4GHz Wi-Fi router (with internet).
-
Connect it to the Router or Switch (which is in same network as your phone) through LAN cable.
-
Run NOUS Smart Home APP, Click”+” at the top right corner (select Gateway and Others-> Wireless Gateway(zig bee)
- Pressing the button for 5 seconds until the red LED blinks, then follow the in-app instructions to connect the smart gateway to your network.
- Waiting for a few seconds ,you can see the gateway is shown and you may rename it
- Press Done to finish the installation of gateway
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>