soundcore A3131 Motion X500 Wireless Hi-Fi Speaker User Guide

June 15, 2024
Soundcore

soundcore A3131 Motion X500 Wireless Hi-Fi Speaker User Guide
soundcore A3131 Motion X500 Wireless Hi-Fi Speaker

At a Glance

Product Overview

  1. Handle
  2. Power Button
  3. Bluetooth Button
  4. EQ Switch Button
  5. Volume Down Button
  6. Play/Pause Button
  7. Volume Up Button
  8. USB-C Charing Port

Charging Your Speaker

Use a certified USB-C cable and charger to prevent any damage.
Charging Your Speaker

| Flashing Red| Low Battery
---|---|---
| Steady Red| Being Charged
| Steady White| Fully Charged

Powering On / Off

Powering On / Off

| Press| Power On
---|---|---
| Steady White
| Press and Hold for 2 Seconds| Power Off
| Light Off

  • This speaker will power off automatically after 20 minutes if no device is connected.
  • You can also set an auto-power-off time in the soundcore app.

Using Your Speaker

Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select “sound core Motion X500” from the Bluetooth list to connect.
Using Your Speaker

| Press| Enter Bluetooth Pairing Mode
---|---|---
| Flashing Blue| Bluetooth Pairing
| Steady Blue| Bluetooth Connected

  • To re-enter Bluetooth pairing mode, press the Bluetooth button once.
  • This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
  • Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

TWS (True Wireless Stereo) Mode]

Two identical soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel).
With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.
True Wireless Stereo

| Press and Hold for 2 Seconds| Enter TWS Pairing Mode
---|---|---
| Flashing White| TWS Pairing
| Steady Blue (Speaker 1)| TWS Connected
| Steady White (Speaker 2)

To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.

Button Controls

| Press| Power On
---|---|---
Press and Hold for 2 Seconds| Power Off
| Press| Enter Bluetooth Pairing Mode
Press and Hold for 2 Seconds| Enter / Exit TWS Pairing Mode
| Press| Switch EQ Modes
Press| Volume Up / Down
| Press| Play / Pause
Press Twice| Next Track
Press Three Times| Previous Track
Press| Answer / End a Call
Press and Hold for 2 Seconds| Reject a Call

Switch EQ Modes

Press the EQ switch button repeatedly to switch EQ modes.

Spatial Signature
Switch EQ Modes
Spatial Dynamic
Switch EQ Modes
Bass Boost
Switch EQ Modes

EQ Mode LED Light Indicator
Spatial Signature White
Spatial Dynamic Cold White
Bass Boost Warm White

LDAC

Use devices powered by Android 8.0 or later to experience LDAC quality sound.
In the soundcore app, tap the Settings icon > “Sound Mode” > “Preferred audio quality”.
LDAC Instruction

  • It takes about 10 seconds to switch audio codecs. You may be requested to update the speaker’s firmware if available.
  • LDAC provides higher quality sound, increases power consumption, and reduces playtime.
  • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.

sound  core App

Download the soundcore app to enhance your experience.
sound  core App
QR Code

Google Play and the Google Play logo are trademarks of Google Inc.
Google Play Logo

Apple and the Apple logo are trademarks of Apple Inc.
App Store Logo

Product information: Check the product name and software version, or read the user guide.
Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
EQ settings: There are various preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
Set auto-power off time: Set an auto-power off time. The speaker will automatically turn off when the time is up.
Voice prompt: Mute or restore the voice prompt while powering on/off.

Reset

Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.

Specifications

DC Power Input 5V 3A
Battery Capacity 4900mAh/7.3V
Audio Output Power 40W
Speaker Driver Full Ranges x3
Charging Time 6 Hours
Play Time (varies by volume level and music content) Up to 12 Hours
Waterproof Level IPX7
Bluetooth Version 5.3
Bluetooth Range 100m / 328ft

soundcore Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals