LAMPLUX CO LIMITED TS-7009 LED Desk Lamp With Wireless Charger Instruction Manual
- June 15, 2024
- LAMPLUX CO LIMITED
Table of Contents
Installation Manual
SKU: TZ-021W
TS-7009 LED Desk Lamp With Wireless Charger
LED DESK LAMP
WITH WIRELESS CHARGING
Please scan this QR code to visit the product page.
https://mount-it.com/products/led-desk-lamp-with-wireless-charging
HAVE QUESTIONS?
Monday – Friday from 5:00am – 5:00pm PST
| |
---|---|---
support@mount-it.com|
855-925-5668| www.mount-
it.com
Product Features
- Ultrathin, minimalist design
- Energy efficient LED
- 5 levels of adjustable color temperature and brightness
- Memory function
- Convenient USB C port
Package Contents
- 1x LED Desk Lamp
- 1x Power Adapter
- 1x User Guide
Specifications
Model | TZ-021W |
---|---|
Operating Voltage | DC 12V / 3A |
USB C Output | DC 5V / 2A |
Power | 9W |
CRI Wireless Charger | >80 |
Wireless Charger | 10W |
Average Illumination | >= 750 Lux |
Product Diagram
1. Lamp Head
2. Lamp Arm
3. Tension Adjuster| 4. Colour Temperature Button
5. Power Button
6. Brightness Button| 7. USB C Port
8. Power Connector
9. Wireless Charger
---|---|---
How to Use
Power Button
Tap the to turn on / off the lamp. It will automatically remember your last
brightness and color temperature selection when turned on.
Color Temperature Button
Tap the button to adjust and cycle through the 5 color temperatures.
Brightness Adjustment Button
Tap the button to adjust and cycle through the 5 levels of brightness.
Wireless Charger
Place a compatible phone on the charging pad to begin charging.
Caution
- Use only the supplied AC power adapter.
- Please do not dismantle the product by yourself, always ask a professional electrician or authorized technician for repairs.
- If you smell a bad odor or anything unusual, please turn off the unit immediately.
- Please do not remove the power plug with wet hands as it may cause electrical shock.
- It is not a toy. Keep away from children.
- Do not put this unit near any heat source or under direct sunlight.
- Clean the unit on a regular basis.
- Please store in a dry and shady place.
Troubleshooting Guide
Problem | Possible Cause | Solution |
---|---|---|
The lamp does not light up | No power supply | Plug in the power adapter |
Did not press the Power Button | Refer to the How to Use section | |
The touch panel is not responsive | Hands are wet | Tap the panel with dry hands |
Voltage fluctuation causing panel failure | Disconnect power to restart the |
lamp
LED failure| LED component failed| Please contact the Support Team
Bad smell| Power adapter failed| Please contact the Support Team
Short circuited| Please contact the Support Team
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However,there is no guarantee that
interference will not occur in a
particular installation.if this equipmemt does cause harmful interference to
radio or television reception,which can be determined by turning the equipment
off and on,the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement, This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
Visit us at www.mount-it.com for product
registration and warranty information.
Our US based customer service team is standing by to answer any questions you
have about your Mount-It! product.
Available by phone Monday – Friday from 5:00am – 5:00pm PST.
Chat live with an agent on our website!
| |
---|---|---
support@mount-it.com|
855-925-5668| www.mount-
it.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>