JoyBerri B0C3WMYZQ8 Kiddy Kruiser Bumper Car User Manual

Product Manual
KIDDYKRUISER Electric Bumper Car

B0C3WMYZQ8 Kiddy Kruiser Bumper Car

What if there was a healthier way for your children to experience real joy?
Hi there, I’m Sephora. I grew up with 5 (yes 5!) younger brothers. I have so many wonderful memories from that time—jumping on our beds past bedtime (sshh), living in our expertly built forts, climbing the walls (literally—I was pretty good at it), and discovering the world together in the most active and exciting ways.
Nowadays, things are different. I see kids sitting for hours on end, eyes glazed, glued to mom’s smartphone, their tablet, the TV, and other devices. It’s hard to watch. I believe kids should be learning the world through play and exploration—and the studies agree.
That’s why I created JoyBerri, a line of quality children’s products to help get kids off the couch and engage their bodies, develop their minds, and explore the world in the most creative and fun ways.
Welcome to the JoyBerri family.
We’re in this together now.

JoyBerri Co-Founder

PRODUCT WARRANTY

Go to kiddykruiser.joyberri.com and register your product within 14 days of purchase to activate the five year warranty.
Joyberri warranties this product against defects in material and workmanship for normal use following the published product manual for a period of FIVE (5) years following the date of purchase. This warranty does not cover damage caused by negligence, misuse, abuse, accident, use inconsistent with the product manual, or unauthorized repair or modification. Any defective product meeting the above limited warranty requirements will be repaired or replaced at no charge.

UNPACK THE BOX

1. Unpack all parts and hardware and inspect each for shipping damage.
2. WARNING! Supervising adults must read and understand all safety warnings and instructions in this manual before assembly and allowing children to use the Kiddy Kruiser bumper car.
3. Compare parts and hardware to WHAT’S IN THE BOX on page 4.
4. Complete the steps in the ASSEMBLY GUIDE on page 5.
   CAUTION! Always use proper lifting techniques.

We hope you enjoy this super awesome bumper car!
If you experience any issues with this product, please call us, text us, or send us an email — we’re here to help you!
Sincerely, Sephora
Co-Founder 844-922-4049 • support@joyberri.com • www.joyberri.com
**** Join the JoyBerri VIP Facebook Group at facebook.com/groups/joyberri

WHAT’S IN THE BOX

Assembly Notes

• You will need two AAA batteries (not included) for the parent remote control.
• Assembly instructions and diagrams include a reference letter, for example “Locate the backrest (D)”. The reference letter corresponds to the letters identifying each part in WHAT’S IN THE BOX? above.

ASSEMBLY GUIDE

WARNING

• Adult assembly is required. Keep children away during assembly. This product contains small parts that may present a choking hazard to children under 3 years old.
• Before assembly, properly dispose of all packaging, especially plastic bags which may present a suffocation hazard to small children.

STEP 1: Install the Wheels

1. Locate the bumper car (A), two large wheels (B), two small wheels (C), two cotter pins and nine shims (F), eight small wheel screws (G), and #2 Phillips head screwdriver (I).

2. Place the car upside-down on a flat, sturdy floor.

3. Align a small wheel with each set of four screw holes in the base of the car. See Figure 1.

4. Use the #2 Phillips head screwdriver to insert four wheel screws to secure each wheel. Fully tighten.

5.  Slide a large wheel onto each end of the wheel axle and press it into the wheel insert. See Figure 1.
   a. The gear side of the wheel faces to the inside. Align the gear on each wheel with the gear-shaped wheel insert as you press the wheels into place.

6. Place three shims onto one end of the axle and insert a cotter pin into the pin hole in the end of the axle.

7. Use your finger to bend the long leg of cotter pin 90-degrees to lock it, and the wheel, in place.

8. Place enough shims onto the other end of the axle so that the axle and wheels do not slide around.

9. Insert the second cotter pin and bend the long leg 90-degrees to lock it in place.

STEP 2: Attach the Backrest

1. Locate the backrest (D).

2. Turn the bumper car right side up.

3. Hold the straps of the five-point harness up with one hand as you slide the backrest under the straps.

4. Place the bottom edge of the backrest into the slot on the back edge of the car. See Figure 2.
   a. Ensure the small tabs along the bottom of the backrest line up with the notches in the slot.

5. Press the backrest firmly into the slot until each tab snaps into place.

STEP 3: Install the Joysticks

1. Locate the two joysticks (E), four joystick screws (H), and the large #2 Phillips head screwdriver (I).

2. Locate the two joystick wiring bundles. There is one wiring bundle in each of the two small rectangular joystick openings on either side of the seat.
   a. Each wiring bundle ends at a small black plastic receptacle with six slots in the top. Notice that three slots on one side are lined with metal.
   b. During shipping, the wiring bundles can fall into the body of the car. To fish them out, simply turn the car upside down, locate the wiring bundles, and push them through the joystick openings.

3. Plug the three metal prongs at the base of a joystick into the three metal-lined slots in one of the black plastic  wiring receptacles. See Figure 3.
   a. Be sure to position the joystick so that “D” (Drive) points forward and “R” (Reverse) points backward, from the point of view of the rider sitting in the car. See Figure 3 Inset.

4. Insert the connected joystick into the rectangular joystick opening.
   a. Make sure the holes in the base of the joystick align with the two holes in the joystick opening.
   b. Make sure “D” still points forward and “R” points backward.

5. Use the screwdriver and two screws to install the joystick. Fully tighten the screws. See Figure 3.

6. Repeat steps 3–5 above to install the second joystick.

STEP 4: Connect the Rechargeable Battery
WARNING
This car contains a sealed lead acid, spill-proof battery which contains toxic, corrosive chemicals (lead acid electrolyte) that may cause serious injury or death if connected, charged, or handled incorrectly. Only a responsible adult who has read and understands all instructions and warnings in this manual may connect, charge, or handle the battery. See battery warnings on page 17.

1. Use the #2 Phillips head screwdriver (I) to remove the two screws securing the seat. See Figure 4. Set the seat, screws, and screwdriver aside.
2.  Remove the small, clear plastic cap on the red (positive) battery terminal, above the + icon. See Figure 4 Left Inset.
3.  Locate the loose red wire in the seat compartment.
4. Slide the red wire’s connector onto the red battery terminal. See Figure 4 Right Inset.
5. Use the screwdriver and screws to re-install the seat.

STEP 5: Charge the Battery Before Use
Charge the battery completely, for up to 8 hours, before using the bumper car for the first time:
WARNING
Only an adult may charge the battery. Keep children away from the battery and charging adapter at all times. See battery and charging warnings on page 17.
NOTICE

• The car will not operate while charging.
• The battery may be damaged if allowed to drain completely.
  Always charge the battery after every use.
  1. Locate the AC charging adapter (K).
  2. Make sure the car is off (power switch is in the OFF position).
  3. Plug the AC charging adapter into the DC port on the control panel. See Figure 5.
  4. Plug the AC charging adapter directly into a standard wall outlet. WARNING! Do not use an extension cord when charging the battery, as doing so may result in fire, explosion, serious injury, or death.
  5. Unplug the charging adapter as soon as full charge is reached. The battery indicator LED on the charging adapter is red when the battery is charging and turns green when the battery is fully charged.

WARNING
Do not charge the battery for more than 20 hours.

• If the battery or charger are damaged in any way, contact Jobbery support for a replacement.
• Do not use the battery or charger until damaged parts have been replaced, as doing so may lead to danger of fire or explosion.

STEP 6: Install AAA Batteries and Pair the Parent Remote Control

1. Locate the parent remote control (L) and the small #0 Phillips head screwdriver (J).
2. Make sure the car is powered off.
3. Use the screwdriver to remove the screw securing the back of the remote control.
4. Insert two AAA batteries (not included) into the remote control. Be sure to install them following the polarity markings inside the battery compartment. See Figure 6.
5. One indicator LED on the front of the remote control will begin flashing.
6. Place the remote control next to the car and press the power switch on control panel to turn the car on. See Figure 6.
7. The remote will automatically be paired to the car. The indicator LED on the remote control will stop flashing to indicate successful pairing.
8. If the remote control fails to pair, turn off the car, remove the batteries from the remote, and repeat steps 4–7.
9. Use the screwdriver and the screw to reinstall the battery cover.

BATTERY WARNING AND CAUTION:

• Replacement of batteries must be done by an adult.
• Do not mix alkaline, standard, or rechargeable batteries.
• Never mix old and new batteries.

OPERATING INSTRUCTIONS

WARNING:

• Only an adult may charge the battery. Keep children away from the battery at all times.
• Do not charge the battery for more than 20 hours. Failure to charge the battery as instructed in this manual may result in serious injury, death, or permanent damage to the battery.
• Always disconnect the charging adapter immediately after charging,
• See additional battery charging warnings on page 17.

Charging the Built-in Rechargeable Battery

• Fully charge the built-in battery for up to 8 hours before using the car for the first time.
• After the first charge, it will typically take about 6–8 hours to charge the battery.
• Always power off the car before charging. The car will not operate while charging.
• To charge, plug the charging adapter into the DC port on the control panel on the front of the car. Then plug the charging adapter into a wall outlet.
• The indicator LED on the charging adapter is red when the battery is charging and green when fully charged.
• The battery indicator LEDs on the car show the battery level. See Using the Control Panel on page 11.
• Always keep the battery charged. Never allow the battery to be completely drained, as this can cause permanent damage to the battery. For best results, charge the battery before it reaches 25% charge.
• Average run-time is about 1 hour per charge.

Using the Parent Remote Control

1. S Button: Press to adjust the speed level: 1, 2, or 3.
2. Up Arrow Button: Press to move the car forward.
3. Down Arrow Button: Press to move the car backward.
4. LED Indicators (3): LEDs light up to indicate the speed level and all three flash when the joysticks are locked.
5. Left Arrow Button: Press to move the car to the left.
6. Right Arrow Button: Press to move the car to the right.
7. P Button: Press to lock the joysticks and stop the car’s movements. WARNING! This car does not have braking capability. The LED Indicators flash when the joysticks are locked. Press the button again to unlock.

NOTE: Input from the parent remote control overrides input from the joysticks.

DC Port and Power Switch
DC Port: Plug the charging adapter into the DC port to charge the built-in battery.
Power Switch: Flip the power switch to turn the car on/off.

Using the Control Panel

1. Horn / Volume – Button
   • Tap: Play car honking sounds.
   • Press and Hold: Decrease the volume.

2. Play/Pause / Accelerate Button
   • Tap: Play / pause the first track.
   • Press and Hold: Play car acceleration sounds.

3. Skip Track / Volume + Button
   • Tap: Skip to the next track.
   • Press and Hold: Increase the volume.

4. Mode Button
   • Tap: Select from the four input sources for the speakers:
   • Car: Play the car’s pre-programmed soundtracks. This source is selected by default.
   • Bluetooth: Connect your mobile device via Bluetooth. Press the Mode button once to select.
   • AUX: Connect your mobile device via an 3.5mm auxiliary cable. See instructions on the next page.
   • USB: Plug in a USB flash drive loaded with MP3 files. See instructions on the next page.

5. USB Port: Plug in a USB flash drive loaded with MP3 files.

6. AUX IN Jack: Plug in an AUX input source:
   • 3.5mm Microphone: Connect a microphone so your child can sing along to the music.
   • 3.5mm Auxiliary Cable: Connect your mobile device to the car via an aux cable.

7. Battery Indicator LEDs (4): The LEDS indicate the remaining battery charge.
   • 4 LEDs Lit: 100%
   • 3 LEDs Lit: 75%
   • 2 LEDs Lit: 50%
   • 1 LED Lit: 25%

Playing Music on the Bluetooth Speakers
You may connect a mobile device, such as a cell phone or tablet, via Bluetooth or 3.5mm auxiliary cable. You can also play music via a USB flash drive.
Connecting Your Mobile Device via Bluetooth

1. Press the Mode button on the control panel one time to choose the Bluetooth input source.
2. On your mobile device, go to Settings > Bluetooth and turn on Bluetooth.
3. Select “YJ-BTcar” in the Bluetooth device list.
4. Press the Pair button.

Connect Your Mobile Device via 3.5mm Auxiliary Cable

1. Plug a 3.5mm aux cable into the AUX IN jack and connect the other end of the cable to your mobile device.
2. The aux input source is selected automatically.

Play Music via a USB Flash Drive

1. Load a USB flash drive with MP3 music files. Please note, other music files are not supported.
2. Plug the flash drive into the USB port on the control panel.
3. The USB input source is selected automatically. Music will begin automatically playing from the flash drive.

Control Music Playback and Volume on the Control Panel

1. Tap the Play/Pause/Accelerate button to play / pause the music.
2. Tap the Skip Track / Volume+ button to skip to the next song/track.
3. Press and hold the Horn / Volume – button to decrease the music volume, from level 1–30.
4. Press and hold the Skip Track / Volume+ button to increase the music volume, from level 1–30.

Controlling the Bumper Car with the Parent Remote Control
A responsible adult can use the parent remote control to control the bumper car:

• Press the Up / Down buttons to move forward and backward.
• Press the Left / Right buttons to move left and right.
• Press the S button to adjust the speed level:
• The default speed is level 1.
• Press the button once to set speed level 2, press twice for level 3. Press three times to return to level 2 and four times to return to level 1.
• Press the P button to lock the joysticks and stop the car’s movements. Press a second time to unlock the joysticks.

WARNING! This car does not have braking capability.
Controlling the Bumper Car with the Joysticks
The rider can use the joysticks to control the car following the instructions shown in the graphic.

• A purple arrow indicates the direction in which to move a joystick.
• A red X indicates when not to use a joystick.

Instructing Children on Safe Riding
WARNING
Before allowing children to operate this car, always clearly and carefully instruct them on the following warnings and safe riding rules. Failure to instruct the rider or failure of the rider to follow the safety warnings may result in serious injury or death:

• Only ride on flat, hard, non-slip surfaces.
• Always remain seated, with hands, feet, and clothing inside the car and away from moving parts.
• Always wear the safety harness, safety helmet, and protective clothing and shoes.
• Do not eat, drink, or chew gum while riding.
• Always use common sense and never practice unsafe riding, which includes, but is not limited to:
• Do not stand in the car. Always ride sitting facing forward in the seat.
• Do not ride at night or when there is low visibility (low light, fog, etc.).
• Do not ride in wet or bad weather (rain, snow, ice, high winds, storms) or on slippery surfaces.
• Do not ride near swimming pools or other bodies of water.
• Do not ride near steps, stairs, or on hills, inclines or other sloped surfaces.
• Do not ride on or near roadways, streets, sidewalks, walkways, or near any type of moving vehicle.
• Do not perform any type of stunts or tricks involving ramps, stairs, steps, hills, jumps, wheelies, or other dangerous or risky maneuvers.
• Do not ride in “off-road” environments: mud, dirt, gravel, sand, or other rough or dangerous terrain.
• Never deliberately bump or crash into obstacles, including other cars, or ride over obstacles or debris such as toys, sticks, or rocks. If the car becomes stuck, stop riding immediately.
• Do not pull this car behind another toy or vehicle; do not tow other toys, people, or objects behind this toy.
• Do not ride distracted; do not perform other tasks while riding .
• Do not allow anyone to push the car when a rider is present.

Pre-Riding: Safety Checklist
This checklist must be completed by a responsible adult before every ride. Do not operate this car unless it is in proper working condition and all of the following have been checked and accounted for:

• Child has been instructed on safe-riding rules.
• Child is wearing an age-appropriate, properly-fitted helmet.
• Child is wearing the safety harness, and the harness is properly fitted and securely fastened.
• Child is wearing protective clothing and shoes, with no loose clothing or drawstrings.
• All product safety labels on the car are properly in place, readable, and understood by the rider.
• All parts of the car are dry and in good condition; the car has been checked for:
• Damage, wear and tear, cracks, malfunctioning parts, unusual sounds or odors, and other unusual conditions. The car is not to be used until any damage found has been repaired.
• Wheels are securely attached to the car. If wheels are loose, they must be tightened before use.
• All operational components are functioning: power switch, joysticks, and parent remote control.
• Battery is fully charged.
• Charging adapter has been disconnected from the car.

SAFETY WARNINGS

Before the assembly and use of this product, a responsible adult must read all safety warnings and all assembly and operating instructions. Failure to do so may result in serious injury or death.
Keep this manual in a safe place for future reference.
Disclaimers

• The use of this product is entirely at the discretion of the responsible adult/owner. Please read all instructions and safety information carefully before allowing children to use this product. We assume no responsibility and expressly disclaim any and all liability for personal injury, death, or property damage or loss sustained through improper use, failure to follow the instructions and warnings in this manual, incorrect assembly, or inadequate or incorrect maintenance or neglect of this product.
• Only use the product as directed in this manual. It is the responsibility of the owner to ensure that all users of this product are adequately informed of all warnings and precautions.
• Information in this manual is subject to change without notice.

Explanation of Safety Warnings
WARNING: Warning indicates a hazardous situation, which if not avoided, may result in death or serious injury.
CAUTION: Caution indicates a hazardous situation, which if not avoided, could result in minor or moderate injury.
NOTICE: Indicates important information not related to hazardous situations.
Minimum Age Requirement: 36 months old
Maximum Occupancy: 1 child at one time
Maximum Child Height: 3 feet, 11 inches
Maximum Age: 8 years old
Maximum Child Weight: 66 lbs
**WARNING
WARNING: BATTERY INGESTION HAZARD
Battery ingestion is extremely dangerous and can cause severe injury and even death. Never allow children to play with batteries and always keep batteries out of reach. If a battery is ingested, seek immediate medical attention.
WARNING: CHOKING HAZARD
Children under 3 years old can choke or suffocate on small parts required for assembly of this product. Adult assembly is required. Keep children away during assembly.
WARNING
Failure to follow the safety warnings and instructions listed below may result in serious injury or death:
Safe-Rider Warnings**

• Only suitable for ages 36 months to 8 years old.
• Maximum user weight is 66 lbs.
• Never allow more than one rider in the car at a time.
• Children must be closely supervised by a responsible adult at all times. Never leave children unattended in or near this car.
• Before allowing children to operate this bumper car, a responsible adult who as read all safety warnings and instructions in this manual must clearly instruct them on all safe riding rules, safety warnings, and using common sense when riding.
• Individual parents must determine if their children have the maturity and ability to understand and follow safety instructions. Children that cannot understand or follow safety instructions may not operate the car.
• Ensure the five-point safety harness is properly fitted and securely fastened before the child may ride.
• The rider must remain seated and wear the safety harness at all times.
• The rider must wear an age-appropriate, properly-fitted helmet. A helmet can protect the rider against serious brain or head injury, or death.
• Never use on roadways, streets, sidewalks, walkways, or near any type of moving vehicle.
• This car does not have brakes. Do not allow children to operate the car in any location that may require breaking capability, as this may result in loss of control, rolling, tipping, or crashing.
• Do not operate the car without the seat (battery cover) securely in place.
• Never use on or near stairs, steps, inclines, hills, or other sloped surfaces.
• Never ride near swimming pools or other bodies of water.
• Do not ride in gravel, rocks, sand, loose dirt, mud, on wet or slippery surfaces, or on thick or deep carpet.
• Never operate the car at night or in low-light conditions. The car may only be operated during the day, in well-lit locations where the rider can properly see the ground and any obstacles.
• Only use the car in a responsible-adult-approved safe riding area: an open location away from any structures or obstructions such as fences, garages, houses, walls, and play areas, such as sports courts, swings, slides, or climbing gyms.
• If necessary to ensure a safe riding area, the supervising adult is responsible for setting up gates or barriers.
• Only operate the car on hard, level, non-slip surfaces, such as grass, hard-packed dirt, hard flooring (such as tile, wood, laminate, linoleum), or low carpet.
• Make sure the riding area is clear of other children and any obstacles or debris before use.
• The rider must keep hands, feet, hair, and clothes inside the car and away from moving parts and openings.
• The rider must always wear protective clothing and shoes. Children should not wear loose or baggy clothing, scarves, or clothing with drawstrings or long cords, as they can get caught in moving parts and may result in choking.
• Do not allow the rider to eat, drink, or chew gum while using the car to prevent choking.
• Do not pull this car behind another toy or vehicle; do not tow other toys, people, or objects behind this car.
• Do not allow anyone to push the car when a rider is present.
• Do not deliberately bump or crash into obstacles, including other cars. Do not ride over obstacles or debris.
• Inspect the car and parent remote control before each use. Do not use if damaged, worn, malfunctioning, or exposed to water. The vehicle is not to be used until any damage has been repaired.
• Always secure the car against unsupervised or unauthorized riding.
• Keep pets away from the car at all times.
• Avoid leaving the car in full sun; direct sun exposure can heat the surface of the car to unsafe temperatures for play.

WARNING
To reduce the risk of burns, fire, electric shock, explosion, serious injury, or death:
Battery Warnings

• Do not disassemble, modify, tamper with, or damage the rechargeable battery, motor, or electrical wiring.
• Never operate the car if the battery has been damaged, opened, or tampered with.
• Keep sharp objects away from the battery, motor, and electrical circuitry.
• Only use the provided battery to power the car. Using a battery other than the provided one may result in fire or explosion.
• Do not use the provided battery or charger with any other product.
• Never open the battery. The sealed lead acid battery contains toxic, corrosive chemicals (lead acid electrolyte) that may cause serious injury or death.
• Keep all liquids away from the battery. Always keep the battery dry. Do not use the car in high-moisture environments, in inclement weather (rain, snow, hail, ice), or in any place where the battery could become wet. Exposing the battery to liquids can cause fire or electric shock.
• Keep the battery away from fire, flammable or explosive items, chemicals, heat sources, and direct sunlight at all times. Excessive heat can cause battery explosion, fire, electrocution, serious injury, death, or damage to property.
• Do not operate or charge in the presence of aerosol (spray) products or corrosive gases, or where concentrated oxygen is being administered.
• Never create direct contact between the positive and negative battery terminals.
• Never incinerate batteries in a fire.
• Leakage from the battery can cause serious injury. If skin or eye contact or exposure to leakage occurs or if battery leakage is accidentally swallowed, seek immediate medical attention.
• Replacement of the remote control batteries must be done by an adult.
• Do not mix alkaline, standard, and rechargeable batteries in the remote control.
• Never mix old and new batteries in the remote control.

Battery Charging Warnings

• Only a responsible adult who has read and understood all safety warnings and instructions may charge the battery.
• Never allow children to charge the battery. Keep children away from the battery and charger at all times.
• Do not modify, tamper with, or damage the charging adapter. Never use a modified or damaged charging adapter to charge the battery.
• Always check the charging adapter (the cable, connector, and wall plug) for damage, wear, or fraying before charging. Do not charge the battery if damage has occurred.
• Only use the provided charging adapter to charge the battery. Using a charging adapter other than the provided one may result in fire or explosion.
• Do not use an extension cord when charging the battery.’
• Never charge the battery near heat sources or flammable or explosive items.
• Always disconnect the charging cable immediately after charging, and prior to cleaning or moving the car.
• Never plug in or unplug the charging cable with wet hands.

NOTICE

• Charge the car after each use. The battery may become permanently damaged if allowed to drain completely.
• The car will not operate while charging.
• Do not ride into large or stationary obstacles, as this can cause the motor to become overheated or damaged. Always ride around obstacles, rather than trying to run over them.
• If the car becomes stuck, stop riding. Help the rider exit the car and then free it from the obstruction.
• Do not operate the car in tight or narrow areas, as this may result in the car getting stuck or the exterior becoming scratched or scraped.
• Avoid using in high temperatures, as this can overheat the motor and electrical components.
• Do not overload the car. ‘
• For residential-use only. Not intended for commercial, institutional, or public use.

PRODUCT TRACKING INFORMATION

Joyberri, LLC
Howell, NJ 07731
844-922-4049
www.joyberri.com
support@joyberri.com
Ping Xiang Aoyada Bicycle Co., Ltd
Made in Gaofu Town, Pingxiang County, Xingtai City, Hebei Province, China (Mainland)
Batch Number: 220901
Date of Production: 09-30-2022

CARE, STORAGE, MAINTENANCE, DISPOSAL

Cleaning

• Power off the car and disconnect the charging cable before cleaning or storing.
• To clean, wipe the external surface of the car with a soft, dry cloth. WARNING! Do not wash with a garden hose or immerse any part of the car in water or other liquids. Do not wash the car with soap and water.
• Do not use chlorine, bleach, or harsh, chemical, corrosive, or abrasive cleaners to clean the car or accessories.
• Use a soft dry cloth to wipe the external surface of the remote control. WARNING! Keep the remote control away from water and other liquids at all times.

Storage

• Do not leave the car in the sun for long periods of time or the product color may fade.
• If the car will not be used for an extended period of time, disconnect the rechargeable battery.
• Do not store outdoors. Store the car and accessories in a cool, dry indoor location such as a garage or shed.
• WARNING! Do not store the car where children could gain unsupervised access to the car.

Maintenance

• Before each use, check the bumper car for:
• Damage, wear and tear, cracks, malfunctioning parts, unusual sounds or odors, and other unusual conditions. The car is not to be used until any damage found has been repaired.
• Wheels are securely attached to the car. If wheels are loose, tighten before use.
• All operational components are functioning: power switch, joysticks, and parent remote control.
• Battery is fully charged.
• Charging adapter has been disconnected from the car.
• Car is dry and in good condition.
• The motors do not require lubrication oil.

Battery Disposal / Recycling

This bumper car contains a sealed lead acid (SLA) battery. Over time, all batteries loose their ability to hold a charge. The expected lifetime of the included SLA battery is about 2,000 charges, or one year of use, depending on a variety of factors, including total use-time.
In most states, it is illegal to incinerate or dispose of batteries in the trash. Always properly dispose of the SLA battery and the remote control batteries according to federal and state regulations. Many car-parts retailers offer battery-recycling programs and many household hazardous waste collection facilities accept SLA batteries.
WARNING

• Only an adult may handle the battery.
• Only lift and carry the battery by the case. Do not lift or carry the battery by the electrical wiring, as this may result in a fire or damage to the battery.

TROUBLESHOOTING GUIDE

Quickly troubleshoot simple issues you might experience with your Kiddy Cruiser using the table below. Please contact a customer support representative for additional assistance at: support@joyberri.com or 844-922-4049. Please do not attempt to repair this product.

Car will not turn on or suddenly stops working.
Parent remote control is not working.| The car is not turned on.| Flip the power switch on the control panel to the ON position.
The battery is low or dead.| Charge the battery.
The parent remote control is out of range.| The remote control has a range of about 50 yards. Move to within 50 yards of the car.
The remote control batteries are dead.| Replace the remote control batteries with new AAA batteries.
The battery connection is loose or incorrectly connected.| Make sure the red wire is securely and properly connected to the positive (+) battery terminal.
The parent lock has been engaged (locks the joysticks).| Press the P button on the parent remote control to turn off the parent lock.
The remote control has gone to sleep.| The remote control goes to sleep after about 10 seconds of inactivity. Tap any button to wake it.
Car drives slowly.| The maximum weight capacity of 66 lbs has been exceeded.| Ensure the rider is no more than 66 lbs.
Riding on uneven ground.| Ride only on hard, level, non-slip ground.
The battery is low.| Charge the battery.
The lowest speed level is selected.| Press the S button on the parent remote control to increase the speed.
The battery connection is loose.| Make sure the red wire is securely connected to the positive (+) battery terminal.
“Drive” reverses and “Reverse” goes forward.| The joysticks may be connected backwards| Check to see that the joysticks are installed according to the instructions on page 6.
Car runs for only a short time.| The battery is low.| Charge the battery.
Music is not playing.| The wrong input source is selected.| Press the Mode button on the control panel to toggle through the four input sources: Car, Bluetooth, Aux, and USB.
Charging adapter becomes warm during charging.| This is a normal condition of the charger.| N/A

PRODUCT SPECS

UNIT SPECS

Size (L× W× H): 28.0” × 28.0” × 16.5”
Net Weight: 13.4 lbs
Maximum Weight Capacity: 66 lbs
Power: 380W
Motors: 2
6V Battery
Type: Sealed lead-acid battery
Capacity: 7 Ah
Rated Voltage: 6V–7A
Use Time: 1 hour
Charging Time: 6–8 hours
Initial Charging Time: 8+ hours
AC/DC Charging Adapter
Input: 110V
Output: 6V
Operating Temperature: 32–104°F
Batteries Required for Parent
Remote Control: 2 AAA Batteries (not included)

FCC STATEMENT

FCC ID: 2AWTO-HH-670Y
**** This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Join Our VIP Facebook Group
We believe that when people come together, great things can happen!
Learn parenting tips, join discussions, and hear about exclusive news and product drops. Plus, you’ll get access to sweet member-only deals and sale prices.
We would love for you to be part of it!
To join the VIP group, scan this QR code or go to facebook.com/groups/joyberri
PS: Email support@joyberri.com with your FB name and we will send you a 10% DISCOUNT CODE on your next order!

https://uqr.to/1gdpv

PRODUCT SPOTLIGHT

Joy Berri Bounce Boss Water Bounce House
This 7-in-1 water bounce house is a complete summer adventure rolled into one! It’s the perfect combination between a bounce house and a splash park. The Bounce Boss can hold up to four children at one time and inflates in less than a minute!
FEATURES

• ASTM-tested and CPC-certified for child safety.
• Reinforced, extra-strong PVC gives extreme durability.
• Giant splash pool holds up to 130 gallons of water.
• Water slide has safety rails and a sprinkler for hours of fun-filled sliding.
• Multiple zones keep kids engaged and allow more children to play at the same time.
• Bouncy castle has a built-in climbing wall.
• Soccer/football goal and basketball net provide a range of sporting activities.
• Includes 450W UL-certified, low-decibel electric air blower.
• Folds up and stores in the included carrying bag for small storage and ultimate portability.

Wheat smiles are of
Questions? Comments? Email us at support@joyberri.com Made in china

References

• joyberri
• joyberri

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>